phone MITSUBISHI MIRAGE 2014 6.G Owner's Guide

Comfort controls
5-41
5
To change the language (vehicles with Bluetooth
®
2.0 interface)
N00702900013
It is possible to set the language used for voice control.
1. Press and hold the /MENU button until you hear a
beep. “GracenoteDB” will appear on the display.
2. Press the /MENU button to select “PHONE SET”.
Then press the or buttons several times to select
“LANGUAGE” and then press the /MENU button to
determine.3. Press the or buttons to select “LangChg YES” and
then press the /MENU button to determine.
4. Press the or buttons to select language and then
press the /MENU button to determine.
5. Press the or buttons to select “LangSet YES” and
then press the /MENU button to determine.A-
/MENU button
B-
button
C-
button
BK0162600US.book 41 ページ ２０１３年３月２２日　金曜日　午後２時４１分

5-42 Comfort controls
5
To use the external audio input function
N00703000011
You can listen to commercially available audio equipment,
such as a portable audio system, from your vehicle’s speakers,
by connecting the audio equipment to the auxiliary audio con-
nector.NOTE
Use a stereo mini-jack connector to connect the audio
equipment to the auxiliary audio connector.
To activate the external audio input mode1. Connect the headphone port of the portable audio system
to the auxiliary audio connector using a commercially
available connection cord.
2. Press the AUX button several times to switch to the AUX
mode. The display will show “AUX” and then the exter-
nal audio input mode will be activated.
3. To deactivate the external audio input mode, press the
AUX button to switch to another mode.
A- Auxiliary Audio connector (Mini-jack)
B- AUX button
C- Display
CAUTION
!
Do not operate the connected audio equipment while
driving.
This could distract you and an accident might occur.
BK0162600US.book 42 ページ ２０１３年３月２２日　金曜日　午後２時４１分

5-56 Comfort controls
5To play tracks from a Bluetooth
® device
(vehicles with Bluetooth
® 2.0 interface)
N00765300104
You can wirelessly connect a digital audio player or cellular
phone supporting Bluetooth
® to listen to the tracks on the con-
nected device.
Refer to “Bluetooth
® 2.0 interface” for the connecting method,
etc. on page 3-128.
The following explains the basic playback method.
NOTE
Depending on the connected device, operation of the con-
nected device is limited to its available functions.

Depending on the connected device, the device may not
operate correctly.

A file protected by copyright might not be able to play-
back.

It is recommended to adjust the equaliser of the connected
device to 0 db or neutral.

The voice operation is not available to access music files
on the connected Bluetooth
® device.
Bluetooth
® device control panel and display
N00765400062
1- CD (Mode changeover) button
2- PWR (On-Off) switch
3-
BT (Bluetooth
®) indicator
4- TRACK indicator
5- Display
6- PAGE (Title scroll) button
7-
(Fast-reverse/Track down) button
8-
(Fast-forward/Track up) button
9- DISP (Title display) button
10- Play/Pause button
11- Stop button
12- RPT (Repeat) button
13- RDM (Random) button
BK0162600US.book 56 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Comfort controls
5-59
5 Steering wheel audio remote control
switches
(if so equipped)
N00714800484
The remote control switches are located on the left side of the
steering wheel.
These switches can be used when the ignition switch or the
operation mode is in ON or ACC.1- Vol + key, - key
Adjust audio functions and the mobile phone function vol-
ume.
2-
CH key, key
Select CD and other audio source tracks and radio stations.
Hold down to skip up and down through tracks.
3- MODE key
Hold down to turn the audio function ON/OFF. Additionally,
each time this is pressed, this switches the audio source.
The order of switching is as shown below.
*1:An iPod cable (available separately) is required.
*2:Requires a separately-purchased Bluetooth-capable audio
device (vehicles with a Bluetooth
® 2.0 interface).
BK0162600US.book 59 ページ ２０１３年３月２２日　金曜日　午後２時４１分