AUX MITSUBISHI MIRAGE 2014 6.G Owners Manual

[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 2014, Model line: MIRAGE, Model: MITSUBISHI MIRAGE 2014 6.G
Pages: 460, PDF Size: 20.86 MB

Page 314 of 460

MITSUBISHI MIRAGE 2014 6.G Owners Manual 5-42 Comfort controls
5
To use the external audio input function
N00703000011
You can listen to commercially available audio equipment,
such as a portable audio system, from your vehicle’s speakers,

Page 315 of 460

MITSUBISHI MIRAGE 2014 6.G Owners Manual Comfort controls
5-43
5
NOTEThe connected audio equipment cannot be adjusted using
the vehicle’s audio system.
Depending on the connected audio equipment, it may pro-
duce noise from the speakers.

Comfort controls
5-43
5
NOTEThe connected audio equipment cannot be adjusted using
the vehicle’s audio system.
Depending on the connected audio equipment, it may pro-
duce noise from the speakers.
Use the connected audio equipment’s own power source,
such as its battery.
Noise may be produced from the speakers if the connected
audio equipment is used while charging it using the acces-
sory socket of the vehicle.
Do not activate the external audio input mode when no
audio equipment is connected.
Otherwise, noise may be produced from the speakers.
Connect audio equipment when the external audio input
mode is deactivated or lower the vehicle’s speaker volume
before connecting it.
Noise may be produced from the speakers if audio equip-
ment is connected after the external audio input mode is
activated.
Compared to the CD player mode and radio mode, the
vehicle’s speaker volume will be lower in the external
audio input mode. Therefore, be careful when switching
from the external audio input mode to the CD player mode
or radio mode since the speaker volume will be higher.
Do not use excessive force on the connection cord. Other-
wise, the cord and connectors may be damaged.
If the connection cord alone is left connected to the auxil-
iary audio connector, noise may be produced from the
speakers.
For information on how to connect and operate the com-
mercially available audio equipment, refer to the owner’s
manual for the commercially available audio equipment.
To play tracks from USB device
(if so equipped)
N00762200056
You can connect your iPod or USB memory device to the USB
input terminal and play music files stored in the iPod or USB
memory device.
See the following section for the types of connectable devices
and supported files.
Refer to “Types of connectable devices and supported file
specifications” on page 3-158.
See the following sections for the connecting methods, “How
to connect an iPod” on page 3-156 and “How to connect a USB
memory device” on page 3-154.
If your vehicle is equipped with a Bluetooth
® 2.0 interface,
you can play music files in your iPod or USB memory device
via voice operation.
Refer to “To play iPod tracks via voice operation” on page 5-47
and “To play USB memory device tracks via voice operation”
on page 5-55.
NOTEA file protected by copyright might not be able to play-
back.
It is recommended to adjust the equalizer of the connected
device to 0 db or neutral.
BK0162600US.book 43 ページ２０１３年３月２２日　金曜日　午後２時４１分

Page 316 of 460

MITSUBISHI MIRAGE 2014 6.G Owners Manual 5-44 Comfort controls
5
iPod control panel and display
N00762300060
To play from an iPod
N00762400087
1. Press the PWR switch to turn on the audio system. The
system turns on in the last mode used.
2.

Page 323 of 460

MITSUBISHI MIRAGE 2014 6.G Owners Manual Comfort controls
5-51
5
USB control panel and display
N00763900063
To play from a USB memory device
N00764000087
1. Press the PWR switch to turn on the audio system. The
system turns on in the last mo

Page 329 of 460

MITSUBISHI MIRAGE 2014 6.G Owners Manual Comfort controls
5-57
5
To listen to tracks from a device connected via
Bluetooth
®
N00765500089
1. Press the PWR switch to turn on the audio system. The
system turns on in the last mode used.
2. Pr

Comfort controls
5-57
5
To listen to tracks from a device connected via
Bluetooth
®
N00765500089
1. Press the PWR switch to turn on the audio system. The
system turns on in the last mode used.
2. Press the CD button several times to switch to the BT-A
(Bluetooth
®) mode. The input mode changes as follows
every time the CD button is pressed: CD mode → iPod
mode → Bluetooth
® mode (if so equipped) → AUX mode
→ CD mode.
The BT indicator are illuminated and then the BT-A mode
will be activated.
3. Connect your Bluetooth
® device.
Refer to “Connecting the Bluetooth
® 2.0 interface and
Bluetooth
® device” on page 3-135.
4. Playback starts automatically.
NOTEDepending on the connected device, the playback may not
start automatically.
In this case, operate the connected device to start the play-
back.To stop the playback (if supported by the device)
N00765600035
To stop the playback, press the Stop button.
To restart the playback, press the Play/Pause button.To pause the playback (if supported by the device)
N00765700036
To pause the playback, press and hold the Play/Pause button
until you hear a beep.To restart the playback, press the Play/Pause button.
To fast-forward/reverse the track (if supported by the
device)
N00703200013
To fast-forward/reverse the current track, press the button
or button.
Fast-forward
To fast-forward the current track, press the button. While
the button is kept pressed, the track will be fast-forwarded.
Fast-reverse
To fast-reverse the current track, press the button. While
the button is kept pressed, the track will be fast-reversed.To select a track (if supported by the device)
N00765800037
Track up
Press the button repeatedly until the desired file number
appears on the display.
Track down
Press the button repeatedly until the desired file number
appears on the display.NOTEPressing the button once during the song will cause
the audio system to restart playback from the beginning of
the file.
BK0162600US.book 57 ページ２０１３年３月２２日　金曜日　午後２時４１分