set clock MITSUBISHI MIRAGE 2014 6.G Owners Manual

5-6 Comfort controls
5Heater without air conditioning function
(if
so equipped)
N00737700031
The heater can only be used while the engine is running.Control panel
N00737800032
Blower speed selection dial
N00737900033
When the ignition switch is in the “ON” position, select the
blower speed by turning the blower speed selection dial.
Turning the dial clockwise will increase the blower speed;
turning the dial counterclockwise will decrease it. When the
dial is set to the “OFF” position, all fan-driven airflow will
stop.
1- Temperature control lever
2- Air selection lever
3- Mode selection dial
4- Electric rear window defogger switch → P. 3 - 1 2 5
5- Blower speed selection dial
BK0162600US.book 6 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Comfort controls
5-11
5 Manual air conditioning
(if so equipped)
N00730300344
The air conditioning can only be used while the engine is run-
ning.Control panel
N00730500304
Blower speed selection dial
N00736500205
When the ignition switch or the operation mode is in ON,
select the blower speed by turning the blower speed selection
dial.
Turning the dial clockwise will increase the blower speed;
turning the dial counterclockwise will decrease it. When the
dial is set to the “OFF” position, all fan-driven airflow will
stop.
1- Temperature control lever
2- Air selection lever
3- Mode selection dial
4- Electric rear window defogger switch→ P.3-125
5- Air conditioning switch
6- Blower speed selection dial
BK0162600US.book 11 ページ ２０１３年３月２２日　金曜日　午後２時４１分

Comfort controls
5-39
5
To display the clock
N00702600010
Press the button to switch the clock mode. To exit the clock
mode, press the button.NOTE
While the clock mode is selected, the display will switch
to the applicable operation display whenever the CD
player, external audio input mode or radio, etc. is oper-
ated. Then, if no entries are made for 7 seconds, the dis-
play will automatically return to the clock mode.
To adjust the clock
N00702700011
1. Press and hold the button and the clock display flashes.
2. Press the or button to adjust the “hours” digit.
If you keep pressing the button, fast-forward begins.
3. When the “hours” digit is adjusted, press the button to
flash the “minutes” digit.
Press the or button to adjust the “minutes” digit.
If you keep pressing the button, fast-forward begins.
4. When the time is set, press the button to stop the clock
display from flashing.
A- (Clock) button
CD player mode Clock mode Example
A- (Clock) button
B- (Clock adjustment up) button
C- (Clock adjustment down) button
BK0162600US.book 39 ページ ２０１３年３月２２日　金曜日　午後２時４１分

5-40 Comfort controls
5
NOTE
Reset the time after the battery terminals are disconnected
and reconnected.

Seconds do not appear in the clock display, but after
adjusting the “minutes” setting, the clock begins to oper-
ate from 0 seconds.
To confirm the version number of the Gracenote
DB (vehicles with a Bluetooth
® 2.0 interface)
N00702800012
1. Press and hold the /MENU button until you hear a
beep. “GracenoteDB” will appear on the display.
Each time the /MENU button is pressed, this switches
in the order Gracenote DB, PHONE SET and cancel.
2. Press the or buttons several times to select “DB
Version” and then press the /MENU button to deter-
mine.
The Gracenote DB version is displayed.A-
/MENU button
B-
button
C-
button
BK0162600US.book 40 ページ ２０１３年３月２２日　金曜日　午後２時４１分