diagram MITSUBISHI MONTERO 1991 Workshop Manual

44 (5) ..... Open or short in either ignition coil circuit
( 1) - Except Montero & Sigma.
( 2) - Will not turn on CHECK ENGINE light.
( 3) - 2.0L turbo only.
( 4) - California only. Except Sigma.
( 5) - Chrysler Motors models only.









\









\









\









\









\









\






CLEARING CODES
Using DRB-II, from main menu select ADJUSTMENTS. Enter ERASE
FAULTS. Follow DRB-II instructions to accomplish this task. If DRB-II
is not available, fault codes may be cleared by disconnecting negative
battery cable for at least 10 seconds, allowing ECU to clear fault
codes.
TEST CHARTS
* PLEASE READ THIS FIRST *
NOTE: The following charts are supplied for Chrysler Motors
vehicles.
NS-1: TESTING IGNITION CIRCUIT - 1.5L
Fig. 7: Circuit Diagram NS-1 (1.5L) (1 of 2)
Fig. 8: Circuit Diagram NS-1 (1.5L) (2 of 2)

Fig. 12: Circuit Diagram NS-2 (1.5L)

Fig. 14: Circuit Diagram NS-3 (1.5L)

Fig. 16: Circuit Diagram NS-4 (1.5L)
Fig. 17: Flow Chart NS-4 (1.5L)
NS-5: TESTING CRANK ANGLE SENSOR CIRCUIT - 1.5L

Fig. 18: Circuit Diagram NS-5 (1.5L)

Fig. 21: Circuit Diagram NS-6 (1.5L)

Fig. 23: Circuit Diagram DR-1 (1.5L)

Fig. 26: Circuit Diagram DR-2 (1.5L)
Fig. 27: Flow Chart DR-2 (1.5L)
DR-3: CODE 12 AIRFLOW SENSOR CIRCUIT - 1.5L

Fig. 28: Circuit Diagram DR-3 (1.5L)

Fig. 32: Circuit Diagram DR-4 (1.5L)