cooling MITSUBISHI MONTERO 1998 User Guide
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 1998, Model line: MONTERO, Model: MITSUBISHI MONTERO 1998Pages: 1501, PDF Size: 25.81 MB
Page 207 of 1501
reconditioning ......... B ........ (3) Require replacement.
Surface is rust-pitted .. B ....... Require reconditioning or
replacement of rotor according
to OEM specifications.
Surface is scored ....... B ... ( 4) Require reconditioning or
replacement of rotor according
to OEM specifications.
Thickness variation
(parallelism) exceeds OEM
specifications .......... B ....... Require reconditioning or
replacement of rotor according
to OEM specifications.
( 1) - Examples of severe corrosion are: composite plate
separated from friction surfaces and cooling fins
cracked or missing.
( 2) - Only applies to vehicles for which OEM "machine to"
specifications exist. If OEM does not supply "machine
to" specifications, the rotor may be worn to discard
specifications.
( 3) - If OEM does not supply "machine to" specifications,
you may machine to discard specifications.
( 4) - Scoring is defined as grooves or ridges in the friction
contact surface. Some vehicle manufacturers require
machining when scoring exceeds their allowable
specifications.
\
\
\
\
\
\
\
SELF-ADJUSTING SYSTEMS
SELF-ADJUSTING SYSTEM INSPECTION \
\
\
\
\
\
\
Condition Code Procedure
Bent .................... A ... Require repair or replacement
of bent part.
Broken .................. A ... Require repair or replacement
of broken part.
Inoperative ............. A ........... ( 1) Require repair or
replacement of inoperative
parts.
Missing ................. C .......... Require replacement of
missing part.
Star wheel does not turn
freely ................. A .. Require repair or replacement.
( 1) - Inoperative includes intermittent operation.
\
\
\
\
\
\
\
SHOE HARDWARE
See BRAKE SHOE HARDWARE .
SHOES
See FRICTION MATERIAL .
SOCKETS
See BULB SOCKETS.
SPEED SENSORS (ELECTRONIC WHEEL AND VEHICLE)
Page 246 of 1501
C - SPECIFICATIONS
1998 Mitsubishi Montero
1998 ENGINE PERFORMANCE
Mitsubishi - Service & Adjustment Specifications
Diamante, Eclipse, Galant, Mirage, Montero, Montero Sport,
3000GT
INTRODUCTION
Use this article to quickly find specifications related to
servicing and on-vehicle adjustments. This is a quick reference
article to use when you are familiar with an adjustment procedure and
only need a specification.
CAPACITIES
BATTERY SPECIFICATIONS TABLE \
\
\
\
\
\
Application Group Size CCA Rating
Diamante ................ 57NAS .................... 520
Eclipse .................. 86 ........... 430 Or ( 1) 525
Galant ................... D26 ..................... 490
Mirage ................. 55B24L .................... 433
Montero ............... 75D26R-MF .................. 490
Montero Sport .......... 75D23R .................... 520
3000GT ................ 75D23R-MF .................. 520
( 1) - Used on 2.0L non-turbo with A/T.
\
\
\
\
\
\
NOTE: Refill capacities are approximate. Correct fluid level
should be determined by mark on dipstick, if applicable.
FLUID CAPACITIES TABLE
\
\
\
\
\
\
Application Quantity
Automatic Transaxle
(Mitsubishi Plus/Mopar Plus/Dexron-II)
Diamante .............................. 9.0 Qts. (8.5L)
Eclipse
2.0L
Non-Turbo ......................... 9.1 Qts. (8.6L)
Turbo ............................. 7.1 Qts. (6.7L)
2.4L ................................ 6.4 Qts. (6.1L)
Galant ................................ 6.3 Qts. (6.0L)
Mirage ................................ 8.2 Qts. (7.8L)
3000GT ................................ 7.9 Qts. (7.5L)
Automatic Transmission
(Mitsubishi Plus/Mopar Plus/Dexron II)
Montero .............................. 10.0 Qts. (9.8L)
Montero Sport ........................ 10.4 Qts. (9.8L)
Cooling System
(Includes Heater & Reserve Tank)
Diamante ............................... 10 Qts. (9.5L)
Eclipse & Galant ...................... 7.4 Qts. (7.0L)
Mirage
1.5L ................................ 5.3 Qts. (5.0L)
1.8L ................................ 6.3 Qts. (6.0L)
Page 268 of 1501
COMPUTER RELEARN PROCEDURES
1998 Mitsubishi Montero
GENERAL INFORMATION
Computer Relearn Procedures
All Models
* PLEASE READ THIS FIRST *
The following general procedures are to be used if
driveability problems are encountered after power loss or battery has
been disconnected. These procedures may provide an aid in eliminating
these problems.
To reduce the possibility of complaints, after any service
which requires battery power to be disconnected, vehicle should be
road tested.
COMPUTER RELEARN PROCEDURES
Vehicles equipped with engine or transmission computers may
require a relearn procedure after vehicle battery is disconnected.
Many vehicle computers memorize and store vehicle operation patterns
for optimum driveability and performance. When vehicle battery is
disconnected, this memory is lost. The computer will use default data
until new data from each key start is stored. As computer memorizes
vehicle operation for each new key start, driveability is restored.
Vehicle computers may memorize vehicles operation patterns for 40 of
more key starts.
Customers often complain of driveability problems during
relearn stage because vehicle acts differently then before being
serviced. Depending on type and make of vehicle and how it is
equipped, the following complaints (driveability problems) may exist:
* Harsh Or Poor Shift Quality
* Rough Or Unstable Idle
* Hesitation Or Stumble
* Rich Or Lean Running
* Poor Fuel Mileage
These symptoms and complaints should disappear after a number
of drive cycles have been memorized. To reduce the possibility of
complaints, after any service which requires battery power to be
disconnected, vehicle should be road tested. If a specific relearn
procedure is not available, the following procedure may be used:
Automatic Transmission
* Set parking brake, start engine in "P" or "N" position.
Warm-up vehicle to normal operating temperature or until
cooling fan cycles.
* Allow vehicle to idle for one minute in "N" position. Select
"D" and allow engine to idle for one minute.
* Accelerate at normal throttle position (20-50%) until vehicle
shifts into top gear.
* Cruise at light to medium throttle.
* Decelerate to a stop, allowing vehicle to downshift, and use
brakes normally.
* Process may be repeated as necessary.
Manual Transmission
Page 270 of 1501
COOLING SYSTEM SPECIFICATIONS & ENGINE COOLING FANS
1998 Mitsubishi Montero
1997-98 ENGINE COOLING
Mitsubishi Specifications & Electric Cooling Fans
Diamante, Eclipse, Galant, Mirage, Montero, Montero Sport,
3000GT
SPECIFICATIONS
BELT ADJUSTMENT
NOTE: Use illustration for water pump drive belt routing. See
Figs. 1-6. The terms alternator and generator are used
interchangeably.
BELT ADJUSTMENT
\
\
\
\
\
\
\
Application Deflection (1) In. (mm)
Diamante ....................................................... ( 2)
Eclipse & Galant
2.0L Non-Turbo ............................................... ( 2)
2.0L Turbo & 2.4L
Generator & Water Pump .................... 0.35-0.45 (9.0-11.4)\
Water Pump & Power Steering ................ 0.22-0.32 (5.6-8.1)\
Mirage
1.5L ........................................ 0.34-0.45 (8.6-11.4)\
1.8L ......................................................... ( 2)
Montero
A/C .......................................... 0.26-0.30 (6.6-7.6)\
Generator & Water Pump ................... ( 3) 0.22-0.26 (5.6-6.6)
Water Pump & Power Steering ................ 0.54-0.70 (13.7-17.8)\
Montero Sport
2.4L
A/C ........................................ 0.24-0.26 (6.1-6.6)\
Generator & Water Pump ................. ( 4) 0.28-0.35 (7.1-8.9)
Water Pump & Power Steering ................ 0.22-0.30 (5.6-7.6)\
3.0L
A/C ........................................ 0.22-0.26 (5.6-6.6)\
Generator & Water Pump ................. ( 3) 0.20-0.27 (5.1-6.8)
Water Pump & Power Steering .............. 0.52-0.68 (13.2-17.3)\
3000GT ......................................................... ( 3)
( 1) - With 22 lbs. (10 kg) pressure applied midway on belt run.
Values are for a used belt.
( 2) - Water pump is driven by timing belt. Timing belt deflection is
controlled by timing belt automatic tensioner.
( 3) - Measured between water pump pulley and crankshaft pulley.
( 4) - Measured between water pump pulley and generator pulley.
\
\
\
\
\
\
\
Page 274 of 1501
Fig. 5: Routing Accessory Drive Belts (Montero - 3.5L & Montero
Sport - 3.0L; Montero Sport - 2.4L Similar)
Courtesy of Mitsubishi Motor Sales of America.
Fig. 6: Routing Timing/Water Pump Belt (3000GT - DOHC)
Courtesy of Mitsubishi Motor Sales of America.
COOLING SYSTEM SPECIFICATIONS
Page 275 of 1501
![MITSUBISHI MONTERO 1998 User Guide COOLING SYSTEM SPECIFICATIONS \
\
\
\
\
\
\
Application](/img/19/57333/w960_57333-274.png "MITSUBISHI MONTERO 1998 User Guide COOLING SYSTEM SPECIFICATIONS \
\
\
\
\
\
\
Application")
COOLING SYSTEM SPECIFICATIONS \
\
\
\
\
\
\
Application Specification
Coolant Replacement Interval ............. 30,000 Miles Or 24 Months
Coolant Capacity (Includes Heater & Reserve Tank)
Diamante ........................................ 10.0 Qts. (9.5L)\
Eclipse .......................................... 7.4 Qts. (7.0L)\
Galant ........................................... 7.4 Qts. (7.0L)\
Mirage
1.5L ........................................... 5.3 Qts. (5.0L)\
1.8L ........................................... 6.3 Qts. (6.0L)\
Montero ......................................... 10.0 Qts. (9.5L)\
Montero Sport
2.4L
With Rear Heater ............................. 9.5 Qts. (9.0L)\
Without Rear Heater .......................... 8.5 Qts. (8.0L)\
3.0L
With Rear Heater ........................... 10.6 Qts. (10.0L)\
Without Rear Heater .......................... 9.5 Qts. (9.0L)\
3000GT ........................................... 8.5 Qts. (8.0L)\
Pressure Cap
Except Eclipse 2.0L Non-Turbo .......................... 11-15 psi
Eclipse 2.0L Non-Turbo ................................. 14-18 psi
Thermostat Opens
Diamante
1997
Starts To Open .................................. 180
F (82C)
Fully Open ...................................... 203F (95C)
1998
Starts To Open .................................. 192
F (89C)
Fully Open ...................................... 203F (95C)
Eclipse
2.0L Turbo & 2.4L
Starts To Open .................................. 180
F (82C)
Fully Open ...................................... 203F (95C)
2.0L Non-Turbo
Starts To Open ................................ 195
F (90.5C)
Fully Open ..................................... 216F (102C)
Galant
Starts To Open .................................... 180
F (82C)
Fully Open ........................................ 203F (95C)
Mirage
Starts To Open ......................... 177-183
F (80.5-83.9C)
Fully Open ........................................ 203F (95C)
Montero
1997
Starts To Open .................................. 180
F (82C)
Fully Open ...................................... 203F (95C)
1998
Starts To Open .................................. 190
F (88C)
Fully Open ..................................... 212F (100C)
Montero Sport
Starts To Open ......................... 177-183
F (80.5-83.9C)
Fully Open ........................................ 203F (95C)
3000GT (SOHC)
Starts To Open .................................... 180
F (82C)
Fully Open ........................................ 203F (95C)
3000GT (DOHC)
Starts To Open .................................... 170
F (77C)
Fully Open ........................................ 194F (90C) \
\
\
\
\
\
\
Page 276 of 1501
ELECTRIC COOLING FAN
COMPONENT TESTING
Radiator Fan Motor (Diamante)
1) Disconnect radiator fan motor connectors A39 and A40.
Ground fan motor connector A39 terminal No. 2 (Black wire). Using a
fused jumper wire, connect battery voltage to fan motor connector A39
terminal No. 1 (Blue/Black wire). See Fig. 7. See WIRING DIAGRAMS. Fan
motor should operate at low speed with no abnormal noises or
interferences. Repair or replace components as necessary.
2) Ground fan motor connector A39 terminal No. 2 (Black wire)\
and connector A40 terminal No. 2 (Black wire). Using a fused jumper
wire, connect battery voltage to fan motor connector A39 terminal No.
1 (Blue/Black wire). See Fig. 7. See WIRING DIAGRAMS. Fan motor should
operate at medium speed with no abnormal noises or interferences.
Repair or replace components as necessary.
3) Ground fan motor connector A39 terminal No. 2 (Black wire)\
and connector A40 terminal No. 2 (Black wire). Using 2 fused jumper
wires, connect battery voltage to fan motor connector A39 terminal No.
1 (Blue/Black wire) and to connector A40 terminal No. 1 (Green wire)\
.
See Fig. 7. See WIRING DIAGRAMS. Fan motor should operate at high
speed with no abnormal noises or interferences. Repair or replace
components as necessary.
Fig. 7: Testing Radiator Fan Motor (Diamante)
Courtesy of Mitsubishi Motor Sales of America.
Radiator Fan Motor (Eclipse)
1) Disconnect radiator fan motor 4-pin connector. Ground fan
Page 279 of 1501
Repair or replace components as necessary. If no problems exist, go to
next step.
2) Ground fan motor 3-pin connector terminal No. 3 (Black
wire). Using a fused jumper wire, connect battery voltage to 3-pin
connector terminal No. 2 (Blue wire). See WIRING DIAGRAMS. Fan motor
should operate with no abnormal noises or interferences. Repair or
replace components as necessary.
Engine Coolant Temperature (ECT) Sensor
Remove ECT sensor from vehicle. Suspend sensor in water so
that sensor does not touch container. Slowly heat water. Using an
ohmmeter, check sensor continuity as temperature increases. Replace
ECT sensor if resistance is not as specified. See
ENGINE COOLANT TEMPERATURE SENSOR RESISTANCE table.
ENGINE COOLANT TEMPERATURE SENSOR RESISTANCE
\
\
\
\
\
\
\
Temperature F (C) Ohms
Diamante, Eclipse 2.0L Turbo & 2.4L
32 (0) ................................................. 5100-6500\
68 (20) ................................................ 2100-2700\
104 (40) ................................................ 900-1300\
176 (80) ................................................. 260-360\
Eclipse Non-Turbo
77 (25) ................................................. 900-1100\
212 (100) ................................................ 600-800\
Galant & Mirage
68 (20) ................................................ 2100-2700\
176 (80) ................................................. 260-360\
Montero
68 (20) ................................................ 2130-2610\
176 (80) ................................................. 258-322\
Montero Sport
68 (20) ................................................ 2100-2700\
176 (80) ................................................. 260-360\
3000GT
32 (0) ...................................................... 5800\
68 (20) ..................................................... 2400\
104 (40) .................................................... 1100\
176 (80) ..................................................... 300\
\
\
\
\
\
\
\
Electric Cooling Fan Relay (Diamante, Eclipse, Galant &
Mirage)
1) Remove radiator fan motor relay from relay box located at
right side of engine compartment. Check for continuity between relay
terminals No. 1 and 3. If continuity exists, go to next step. If
continuity does not exist, replace cooling fan relay. See Fig. 8.
2) Using a fused jumper wire, connect battery voltage to
cooling fan relay terminal No. 1. Using another jumper wire, connect
cooling fan relay terminal No. 3 to battery ground. With cooling fan
relay energized, there should be continuity between cooling fan relay
terminals No. 4 and 5. With cooling fan relay not energized, there
should be no continuity between terminals No. 4 and 5. If continuity
does not exist as specified, replace cooling fan relay. See Fig. 8.
Electric Cooling Fan Relay (Montero, Montero Sport & 3000GT)
1)Remove relay from relay box in engine compartment relay
box. Check for continuity between relay terminals No. 2 and 4. If
continuity exists, go to next step. If continuity does not exist,
replace cooling fan relay. See Fig. 9.
2) Using a fused jumper wire, connect battery voltage to
Page 280 of 1501
cooling fan relay terminal No. 2. Using another jumper wire, connect
cooling fan relay terminal No. 4 to battery ground. With cooling fan
relay energized, there should be continuity between cooling fan relay
terminals No. 1 and 3. With cooling fan relay not energized, there
should be no continuity between terminals No. 1 and 3. If continuity
does not exist as specified, replace cooling fan relay. See Fig. 9.
Fig. 8: Testing Electric Cooling Fan Relay (Diamante, Eclipse,
Galant & Mirage)
Courtesy of Mitsubishi Motor Sales of America.
Page 281 of 1501
Fig. 9: Testing Electric Cooling Fan Relay (Montero, Montero
Sport & 3000GT)
Courtesy of Mitsubishi Motor Sales of America.
SYSTEM TESTING
NOTE: For appropriate wiring diagram, see WIRING DIAGRAMS.
NOTE: Radiator fan on Montero and Montero Sport is mounted to a
hydraulic fan clutch which is mounted to the water pump.
Replace fan clutch if leaks are detected at case joints and
seals, fan can be rotated with very light resistance or the
bimetallic strip is damaged.
NOTE: Operation of radiator and condenser fans is controlled by
vehicle Powertrain Control Module (PCM). Based on vehicle