transmission speed sensor MITSUBISHI MONTERO 2000 Service User Guide
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 2000, Model line: MONTERO, Model: MITSUBISHI MONTERO 2000Pages: 1839, PDF Size: 29.19 MB
Page 909 of 1839
Page 913 of 1839
Page 919 of 1839
AUTOMATIC TRANSMISSION -Troubleshooting AUTOMATIC TRANSMISSION -Troubleshooting AUTOMATIC TRANSMISSION -Troubleshooting 23-18
OK
(2)NG
From the previouspage
Repair
OK
Repair
Check the following connector:E-113
Repair
Measure at solenoid valve assembly
connector C-04.
DDisconnect the connector and
measure at the harness side.
(1) Voltage between terminal 1 and
earth
(Ignition switch: ON)
OK:4.8 - 5.2 V
(2) Resistance between terminal 2
and earth
OK:2
Wor lessOK
OK
OKNG NG (1)NG
NG
DCheck the harness between the
solenoid valve assembly and the
engine-A/T-ECU (earth line), and
repair if necessary. <6G7>
DCheck the harness between the
solenoid valve assembly and the
A/T-ECU (earth line), and repair if
necessary.<4M4>
DCheck the harness between the
solenoid valve assembly and the
engine-A/T-ECU (power supply
line), and repair if necessary.
<6G7>
DCheck the harness between the
solenoid valve assembly and the
A/T-ECU (power supply line), and
repair if necessary.<4M4>
DCheck the harness between the
solenoid valve assembly and the
engine-A/T-ECU, and repair if
necessary. <6G7>
DCheck the harness between the
solenoid valve assembly and the
A/T-ECU, and repair if necessary.
<4M4>Check the following connector:E-113
Check the following connector:E-113
Code No. 21 Crank angle sensor <6G7> or engine speed
sensor <4M4> systemProbable cause
If no output pulse from the crankanglesensor orenginespeed sensor is
detected for 5 seconds or more when the vehicle speed is 25 km/h or more, it
is judged that there is an opencircuit in the crankanglesensor or anopen
circuit in theenginespeed sensor, and code No. 21 is output.DMalfunction of crankshaft sensingblade<6G7>
DMalfunction of crankanglesensor <6G7>
DMalfunction of enginespeed sensor<4M4>
DMalfunction of harness or connector
DMalfunction of engine-A/T-ECU <6G7>
DMalfunction of A/T-ECU<4M4>
Check the following connectors:
<6G7> B-52,<4M4>B-36Repair
Transient malfunction
(Refer to GROUP 00 - Points to
Note for Transient Malfunctions.)
OK NG
NGOKMUT-
IIData List
DNo. 21 Crankanglesensor
<6G7>
No. 21 Engine speed sensor
<4M4>
OK:Refer to P.23-61 (Data List
Chart).
To the nextpage
www.WorkshopManuals.co.uk
Purchased from www.WorkshopManuals.co.uk
Page 920 of 1839
Page 921 of 1839
Page 922 of 1839
Page 923 of 1839
Page 924 of 1839
Page 933 of 1839
Page 934 of 1839
