change time MITSUBISHI OUTLANDER 2014 3.G Rear Entertainment

4Using this manual
Using this manual
25
Basic operations
Basic operations
Basic operations for playing a disc
Insert a disc
When a disc is inserted, the screen automatically changes to
DISC and the disc begins to play.If a disc is already inserted, press the
SOURCE
button, select DISC, and
press the PLAY
button.
NOTE
·When a DVD video is inserted, the main menu is sometimes displayed.In this case,
use the disc menu to operate the DVD.
To pause
Press the PAUSE
button
Playback pauses. With a DVD video, DVD-VR, or video CD, the paused image
will remain displayed.
Pressing the PAUSE
button again while in pause mode resumes playback.To stop the disc
Press the STOP
button
Playback stops.
To Play a disc
mc4383
Turning the power ON and OFF
Press the POWER
button
The power comes ON.
· The POWER indicator illuminates. Press the POWER
button again
The power goes OFF.

→ “DVD video” (P36)
· Indicates the names of
the switches found only
on the remote control.
(There are no switches on the system panel.)Chapter title
Section title Title
Subtitle
· Indicates the names of the buttons on the
remote control and on
the system panel.
Chapter title
· Indicates the items displayed on the
display (screen).
Reference item
page number

24Basic operations
Basic operations
To select a system source
Press the
SOURCE
button
Each time the
SOURCE
button is pressed, the
system source changes as shown in the fi gure
below.
DISC
The video screen from the disc (such as DVD video, DVD-VR) in the
system is displayed.
If no disc is inserted, "NO DISC LOADED" is displayed.
mc4387
VIDEO(if so
equipped) Images from video devices (such as
video cameras, games) connected
to the video input terminals are
displayed.
NOTE
· When the
SOURCE
button is pressed, the
currently selected source is displayed in the upper
left corner of the screen.
· If the car is not equipped with the Auxiliary Video
connector
(RCA), the VIDEO mode cannot be
used. (The image will not be displayed even when
switching to VIDEO mode.)
To insert/eject the disc
To insert a disc
mc4395
Insert the disc into the disc loading slot with the
playing side facing down.
When the disc is inserted, it is loaded and the
DISC indicator illuminates. To eject the discPush the
EJECT
button to eject the disc.
mc4395a
NOTE
· If a disc is inserted when the system power is OFF,
the power will automatically come ON.· When a disc is ejected and left in the disc loading
slot for 10 seconds, the disc will automatically be
reloaded into the system.· Discs can be ejected even when the ACC is turned
OFF.
Sample image for vehicles equipped with the MMCS

25
Basic operations
Basic operations
Basic operations for playing a disc
Insert a disc
When a disc is inserted, the screen automatically changes to
DISC and the disc begins to play.
If a disc is already inserted, press the
SOURCE
button, select DISC, and
press the PLAY
button.
NOTE
· When a DVD video is inserted, the main menu is sometimes displayed.In this case,
use the disc menu to operate the DVD.
To pause
Press the PAUSE
button
Playback pauses. With a DVD video, DVD-VR, or video CD, the paused image
will remain displayed.
Pressing the PAUSE
button again while in pause mode resumes playback.
To stop the disc
Press the STOP
button
Playback stops.
To Play a disc
mc4383

DVD video/DVD-VR31
DVD video/DVD-VR

When the disc is stopped, press the
MENU
button
CAR ACTION MOVIEDRIVE & DRIVE
MB226 The title menu is displayed.
NOTE
· The menu may not be displayed, depending on the
DVD video/DVD-VR disc.
DVD video/DVD-VR operations
DVD video/DVD-VR operations
Insert a disc
When a disc is inserted in the system, the
screen automatically changes to the DVD
video/DVD-VR image and the disc begins
to play.
image07
If a disc is already inserted, press the SOURCE
button, select DISC, and press
the
PLAY
button.
NOTE
· When a DVD video/DVD-VR is inserted, the menu
is sometimes displayed. In this case, use the disc
menu to operate the DVD.
To display the title menu
During playback, press the
STOP

button to stop the video.
mc4385

DVD video/DVD-VR
32
DVD video/DVD-VR
To change the subtitle languageEach time the
SUB TITLE
button is
pressed, the next available subtitle
language can be displayed in turn.
NOTE
· The CURSOR menu can also be used to change the
screen angle, audio language, or subtitle language.→ “To change the angle, audio language, or subtitle language”
(P34)
To display the main menu
During video playback, press the MENU
button
CAR ACTION MOVIEDRIVE & DRIVE
NOTE
· The menu may not be displayed, depending on the
DVD video/DVD-VR disc.
· When the menu is displayed, use the disc menu to operate the DVD. Refer to the DVD video user
manual for DVD operation instructions.· Depending on the DVD, the same menu is sometimes displayed as both the title menu and the main menu. To change the screen angle, audio language, or subtitle languageRefer to the DVD video user manual
for information about angles, audio
languages, and subtitle languages.
NOTE
· Angles may be selected when there are two or more
angles recorded on the DVD.
In some cases, the angle may not be changed for certain scenes.
· Only the audio and subtitle languages recorded on
the DVD video/DVD-VR are available.
In some cases, depending on the DVD video/DVD- VR specifi cations, changes may not be made during
playback.· Refer to the DVD video/DVD-VR package for
information about available angles, audio languages,
and subtitle languages.
To change the angle

Each time the
ANGLE
button is pressed,
the next available camera angle can be
displayed in turn.
NOTE
· For scenes that have different angles available, the mark is displayed on screen. → “To set indications”
(P40)
To change the audio language
Each time the
AUDIO
button is pressed,
the next available audio language can be
displayed in turn.

DVD video/DVD-VR
34
DVD video/DVD-VR
NOTE
· The audio mode may not be switchable for some
DVD-VR discs.To change the play mode (DVD-VR only) While CURSOR menu is displayed,
move the JOYSTICK
left and right
to select play mode.
Move the JOYSTICK
up and down
to change play mode.
Play mode
ALL
: Play from the beginning of the disc : Repeat play within the title.
ƒ
: Repeat play within the chapter.
Press the RTN
button
NOTE
• After a while, the CURSOR menu will go away
automatically without pressing the RTN
button, and
the selections will be set.
To change the angle, audio language, or subtitle language
To change the angle
While CURSOR menu is displayed,
move the JOYSTICK
left and right
to select
the angle number
Move the JOYSTICK
up and down
to change the angle number
Press the RTN
button
NOTE
· For scenes that have different camera angles
available, the
mark is displayed on screen.
· It is possible to hide the
symbol.
→“To set indications” (P40)· It may take some time for the angle to change.
To change the audio language While CURSOR menu is displayed, move the JOYSTICK
left and right
to select the audio language number
Move the JOYSTICK
up and down
to change the audio language
number
Press the RTN
button
To change the subtitle language and turn subtitles ON or OFF(For DVD-VR, subtitles can only be turned ON or OFF.)
While CURSOR menu is displayed,
move the JOYSTICK
left and right
to select the subtitle language
number, or select Subtitles (ON/
OFF).

Move the JOYSTICK
up and down
to change the subtitle language or
turn it ON or OFF.
Press the RTN
button
After a while, the CURSOR menu will go away,
and the set subtitle language will be displayed.To change the audio mode (DVD-VR only) While CURSOR menu is displayed,
move the JOYSTICK
left and right
to select audio mode.
Move the JOYSTICK
up and down
to change audio mode.
Audio mode
: Stereo: L channel monaural : R channel monaural
Press the RTN
button
ALL




ƒ

Music CD/MP3/WMA/AAC
46
Music CD/MP3/WMA/AAC
CURSOR menu display information Status display (Music CD)
Track number:
the number for the currently playing track is dis-
played. Playback time:
the playback time is displayed. Audio mode:
the audio mode is displayed. Repeat/random:
repeat and random modes are displayed. Playback status:
the current playback status is displayed. It is displayed during CD-TEXT mode. Status display (MP3/WMA/AAC)Folder number Play list number:
the currently playing folder number or play list
number is displayed.Track number: the number for the currently playing track is
displayed.Playback time:the playback time is displayed.Repeat/random:repeat and random modes are displayed.Playback status:the current playback status is displayed.Display mode:the display mode during MP3/WMA/AAC playback
is displayed.
Music CD/MP3/WMA/AAC operations
mc4428
Music CD/MP3/WMA/AAC operationsMusic CDs and discs in which MP3, WMA, and AAC
fi les are recorded can be played.
Insert a disc
When a disc is inserted, the system
automatically changes to the disc
playback screen and CURSOR menu is
displayed.
Music CD
mc4429
MP3/WMA/AAC
MMMMMM
mc4389
If a disc is already inserted, press the SOURCE
button, select DISC, and press
the
PLAY
button.NOTE
· The contents of the displayed list or text depend on the information recorded on the disc or the
disc type.
· When there are music CD fi les and MP3/WMA/
AAC fi les on the disc, the MP3/WMA/AAC fi les
are played.To play music CD fi les, change to
“CD TRACK” in display mode and select the
desired track (song).
→ “To change display modes”
(P47)

Video CD49Video CD
Video CD operations
mc4436
Video CD operations
Insert a disc
When a disc is inserted in the system, the
screen automatically changes to the video
CD image and the disc begins to play.
mb159a
If a disc is already inserted, press the SOURCE
button, select DISC, and press
the PLAY button.
NOTE
· When a video CD with playback control (PBC) is inserted, the menu is sometimes displayed.In this
case, use the disc menu to operate the video CD.
The CURSOR menu Press the CURSOR
button to display
CURSOR menu
TRACK001 0:12:34
ƒmc4442
Status display Track number:
the number for the currently playing track is dis-
played. (PBC supported: not displayed)Playback time:the playback time is displayed.
(PBC supported: not displayed)Audio output mode:the audio output mode is displayed.Repeat/random:repeat and random modes are displayed. (PBC
supported: PBC is displayed)Playback status:the current playback status is displayed.

Troubleshooting53
Troubleshooting
ProblemCause Action to take
The angle change
mark does not display. The angle change
mark display is set to
OFF.Set the angle change
mark display to ON.
→ “To set indications”
P40
The angle cannot be
changed due to the
disc speci
fi cations.
The disc takes a while
to begin playing. There are many
recorded
fi les, folders,
and/or trees. Do not record
unnecessary folders
or fi
les.
There are fi les or
folders that cannot be
played. · The
fi les were
saved with a name
or recorded in a
format that cannot
be played on the
system.
· Files are not recorded in a
supported format.
· The disc is not
properly recorded. Check the operation
of the recording
equipment.
File and/or folder
names are not
properly displayed.
Sound quality is poor;
the disc skips.
Problem Cause Action to take
Images and audio do
not play.
The system
SOURCE is DISC.
There is no disc
inserted. Insert a disc. The system SOURCE is VIDEO.
(if so equipped)
The external device
connected to the
video input terminals
is stopped.Set the external
device to playback
mode.
The system does not
function (when playing
DVD video, DVD-VR)
even after pressing
the buttons. Depending on the
DVD video or DVD-
VR disc, there are
sometimes limitations
on device operations.
—
The audio language,
subtitle language,
and/or angle do not
change. Depending on the
DVD video or DVD-VR
disc, subtitles, angles,
and languages cannot
be changed.Check the DVD video
directions.