ignition MITSUBISHI OUTLANDER 2014 3.G Rear Entertainment

14Names and functions of parts
Names and functions of partsPrecautions for use
Precautions for use
·
When running the engine so that you can view a video, for example, do not park your vehicle in a
garage or other enclosed space that has poor ventilation.
· When driving, set the volume to a level at which you can still hear sounds outside the vehicle. Driving
without being able to hear sounds outside the vehicle could result in an accident.
· For safety’s sake, the driver must not operate while driving.
WARNING
· Do not disassemble or modify. Doing so could cause smoke, fi re, or an accident.
CAUTION
NOTE
· When a message is displayed on the screen, be sure to follow the instructions that appear.
· Video may be viewed when the ignition switch is turned to ON or ACC, but to save battery power, it is best to view while the engine is running.
· If video is viewed for an extended period without running the engine, a low battery warning is displayed and the power will automatically be turned off.
· If the temperature of the system becomes too high, the screen may go dark as a preservation measure. This is not a malfunction.
· The following are characteristic of liquid crystal displays and are not malfunctions.
· Small black or luminescent (red, green, or blue) spots appear on the screen.
· Screen movement becomes sluggish in cold weather.
· Screen color and brightness vary depending on the viewing angle.
· Clean the screen by wiping it with a soft cloth. Do not use benzine, anti-static agents, or chemically treated tissues. Doing so could damage the screen.

Troubleshooting
52
Troubleshooting
Problem Cause Action to take
The wireless
headphones do not
work. The wireless
headphone power is
switched OFF, or the
volume is turned all
the way down.Check the wireless
headphone power and
volume.
The wireless
headphone battery is
run down. Replace the battery.
The disc does not
play. The disc is inserted
with the disc surface
facing up.Insert the disc with the
disc surface facing
down.
The disc is dirty or
scratched. Check the disc.
The inserted disc is
not supported by the
system.
The recording format
is not supported by
the system. Check the operation
of the recording
equipment.
Problem
Cause Action to take
The power does not
come on. The ignition key is in
the OFF position.Turn the ignition key
to the ACC or ON
positions.
The display remains
closed. Open the display or
press the POWER
button.
The remote control
does not work. The remote control
battery is run down.Replace the battery.
The system remote
control sensor is in
strong light, such as
direct sunlight. Avoid using the
system in direct
sunlight.
The remote control
is not aimed at the
system remote control
sensor. Aim the remote control
at the system remote
control sensor.
The screen is dark. The brightness is not properly adjusted.Make the necessary
adjustments.
The color is bad. The color or tint is not properly adjusted.