lock MITSUBISHI OUTLANDER 2014 3.G Rear Entertainment

10Names and functions of parts
Names and functions of parts
Replacing the battery
Use your fi
ngernail to press tab A on
the battery case at the backside of the
remote control. While pressing tab A in
the direction shown in (1), pull the battery
case out as shown in (2)NOTE
· When disposing of the lithium battery, apply
insulating tape and dispose of the battery in
accordance with applicable local regulations. Place a new battery in the battery case
with its positive side facing up
New battery(positive side)
mc4380
Before using the remote controlThe remote control comes with a battery
installed.
There is an insulation sheet to prevent
the battery from discharging. Remove this
insulation sheet before using the remote
control.
mb073
Insulation sheet
Operating instructions
When using the remote control to operate
the system, aim the remote control at the
remote control sensor.
mc4394
Remote control sensorNOTE
· Do not disassemble or drop the remote control, and
do not subject the remote control to any physical
shock.
· Do not place any heavy objects on top of or sit on the remote control.
· If the remote control sensor is exposed to direct sunlight or other strong light, it may stop functioning
properly or stop operating at all. In this situation,
block out the light.

11
Names and functions of parts
Names and functions of parts
· Be sure to place the battery in with the correct
polarity.
· Replace the old battery with a new one of the same type (CR2025LITHIUM).
Replace the battery case into the
remote control
mb076
Slide the battery case in
until tab A locks it in place.
Tab A
·
For safety’s sake, keep batteries out of the
reach of children.
WARNING

Error display messages51
Error display messages
MessageAction to take
HIGH TEMPERATURE
EXTREMELY HIGH TEMPERATURE
INSIDE.SYSTEM OFF IN 7 SECONDS. Wait a while for the
device to cool down.
SYSTEM ERROR (×××)
CALL AN AUTHORIZED
DEALER FOR ASSISTANCE. Contact your authorized
dealer.
Message
Action to take
DVD DRIVE ERROR(××-××)
CALL AN AUTHORIZED
DEALER FOR ASSISTANCE.
Contact your
authorized dealer.
((××-××) is an error
code.)
DISC ERROR (××-××)
PLEASE CHECK THE DISC. Check the disc type,
check for scratches on
the disc.
VIDEO MODE (NTSC/PAL) IS SWITCHING
NOW.
PLEASE WAIT Wait until the video
playback mode changes
(NTSC
PAL).
DISC ERROR (××-××)
THE REGION OF DISC CAN NOT BE
PLAYED. Check the region
number.
DISC ERROR (××-××)
REPLACE DISC TO CHANGE PARENTAL
LOCK LEVEL. Verify the PARENTAL
LOCK LEVEL of the
disc.
ABNORMAL VOLTAGE
ABNORMAL VOLTAGE INPUT NOW.
SYSTEM OFF IN 7 SECONDS. Check the battery
voltage.