maintenance MITSUBISHI OUTLANDER 2014 3.G Rear Entertainment

Supported disc types21
Supported disc typestion, or rental of discs without expressed
written permission is prohibited by law.
· This product incorporates copyrighted technologies. Macrovision Corporation
and other copyright holders are protect-
ed by US patents and other intellectual
property rights protections.
· Permission to use this copyrighted technology must be obtained from Mac-
rovision Corporation. Without special
permission from Macrovision Corpora-
tion, use of this technology is restricted
to home or private use.
any burrs using a ballpoint pen or other
implement.
Precautions for storage
· When not using discs, always put them in their cases and keep them out of
direct sunlight.
· Always remove discs from the system when not using them for an extended
period.
Disc playing environment
· Extreme changes in temperature may cause moisture to form on the discs or
inside of the system, preventing normal
operation. Such cases include turning
on the heater in the vehicle during the
extreme cold of midwinter.
In such cases, eject the disc and wait a while before using the system.
· Do not use cracked or warped discs.
· Do not use heart shaped or other spe- cial shaped discs, or partially transpar-
ent discs.
· Do not use 8 cm CD adapters. Doing so could cause a malfunction.
Copyright information
· The copying, broadcast, public exhibi-
Handling of discs
Proper handling of discsPrecautions for handling
· Dirt or fi ngerprints on the disc surface
could make the disc unreadable. Do not
touch the disc surface when handling
the disc. Always hold the disc at the
outer edges, or at the center hole and
the outer edge.
· Do not apply labels or stickers to the disc and do not scratch the disc.
· Do not force another disc into the disc loading slot when there is already a disc
inserted. Doing so could damage the
discs and cause malfunctions.
Care and maintenance
· Periodically clean the disc surface. Clean the disc with a soft cloth. Gently
wipe from the center hole to the outer
edge. Do not wipe in a circle.
· A new disc may still have burrs on its periphery and center hole, so be sure to
check for such burrs.
Using a disc that has burrs can cause a malfunction, so be sure to remove