cruise control MITSUBISHI OUTLANDER SPORT 2014 3.G Owners Manual

Instruments and Controls1-1
1
Overview
E00100108168
Instruments and Controls Windscreen wiper and washer switch P.6-47 Rear window wiper and washer switch P.6-51Steering wheel audio remote control switches
* P.8-24
Supplemental restraint system - airbag (for driver’s seat) P.5-21, 5-23Horn switch P.6-54
Cruise control switch
* P.7-35
Supplemental restraint system (SRS) - front knee airbag (for driver’s seat)
* P.5-24
Combination headlamps and dipper switch P.6-40Turn-signal lever P.6-45Front fog lamp switch P.6-46Headlamp washer switch
* P.6-52
Active stability control (ASC) OFF switch P.7-33
Headlamp levelling switch
* P.6-44
Instruments P.6-2
Regenerative braking level selector (paddle) P.7-17
Power switch P.7-10
Steering wheel height and reach adjustment lever P.7-6
Multi information display switch P.6-4Sonar switch* P.7-65
Driver’s side electric tailgate switch
* P.4-17
Acoustic Vehicle Alerting System (AVAS) OFF switchP. 7 - 2 5
Forward Collision Mitigation System (FCM) ON/OFF switch
* P.7-59
BK0203201EN.book 1 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Multi information display6-4 Instruments and controls
6
[When the operation mode of the power switch is ON]
E00520001764
Each time the multi information displayswitch is operated, the buzzer sounds and themulti information display changes betweeninformation such as warnings, tripmeter,
1- NORMAL indicator display screen
Displayed when the ECO mode switchand 4WD lock switch are OFF.
2- ECO mode indicator display screen
Displayed when the ECO mode switch isON and the 4WD lock switch is OFF.
3- ECO LOCK indicator display screen
Displayed when the ECO mode switchand 4WD lock switch are ON.
4- 4WD LOCK indicator display screen
Displayed when the ECO mode switch isOFF and the 4WD lock switch is ON.m ECO mode switch P. 6-46m 4WD lock switch P. 7-19
5- Battery charge mode display screen
m P. 7-23
6- Battery save mode display screen
m P. 7-22
7-
mark display screen
m P. 6-9
8- Forward Collision Mitigation System
(FCM) OFF display screen
* m P. 7-55
9- Lane Departure Warning (LDW) display
screen
* m P. 7-60
10- Cruise control display screen
* m P. 7-35
11- Adaptive Cruise Control System (ACC)
display screen
* m P. 7-43
12- Speed limiter display screen
* m P. 7-39
13- Drive battery level display screen
m P. 6-9
14- Odometer
m P. 6-10
15- Information screen
m P. 6-7
16- Select position indicator
m P. 7-15
17- Fuel remaining display screen
m P. 6-9
18- Outside temperature display screen
m P. 6-10
Multi information display switch
BK0203201EN.book 4 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Indicator lamp, warning lamp, and information screen display list
Instruments and controls 6-29
6
zThe outside temperature is 3 °C (37 °F) or less.
zBe careful of ice on the road.zThe road can be icy even when this warn-ing is not displayed, so drive carefully.
zThe Adaptive Cruise Control System (ACC) has detected the approach of the vehicles in front.
zIncrease the following distance by depress-ing the brake pedal or marking other decel-erating control.Refer to “Adaptive Cruise Control System (ACC): Proximity alarm” on page 7-46.
zThe Forward Collision Mitigation System (FCM) has detected the danger of collision.
zTa k e a p p r o p r i a t e a c t i o n s u c h a s d e p r e s s i n g the brake to avoid collision.Refer to “FCM braking function” on page 7-56.
zThe Adaptive Cruise Control System (ACC) detected a stop of the vehicle in front and stopped your vehicle, but the brake will be released soon.
zDepress the brake pedal as soon as your vehicle comes to a stop.Refer to “Adaptive Cruise Control System (ACC)” on page 7-43.
Screen
Cause
Solution (Reference)
BK0203201EN.book 29 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Indicator lamp, warning lamp, and information screen display list6-30 Instruments and controls
6
zThe Adaptive Cruise Control System (ACC) control is automatically cancelled and the system is placed in the ‘standby’ state.
Refer to “How to use ACC” on page 7-48.
zConditions for the start of control are not met, the Adaptive Cruise Control System (ACC) can not start the control.zThe Adaptive Cruise Control System (ACC) can not start the control because the speed is out of speed range.zThe Adaptive Cruise Control System (ACC) can not start the control because not detected the approach of the vehicles in front.zThe Adaptive Cruise Control System (ACC) is not available temporarily such as for adhesion of contaminants to the sensor.This is not a malfunction.zThere is a fault in the Adaptive Cruise Control System (ACC).
zWe r e c o m m e n d y o u t o h a v e i t c h e c k e d .Refer to “Adaptive Cruise Control System (ACC)” on page 7-43.
Screen
Cause
Solution (Reference)
BK0203201EN.book 30 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

7
Starting and drivingEconomical driving ...........................................................................7-2Driving, alcohol and drugs ...............................................................7-2Floor mat *........................................................................................ 7-3Safe driving techniques..................................................................... 7-4Parking brake .................................................................................... 7-4Parking .............................................................................................. 7-5Steering wheel height and reach adjustment..................................... 7-6Inside rear-view mirror .....................................................................7-6Outside rear-view mirrors .................................................................7-7Power switch ...................................................................................7-10Starting and stopping the Plug-in Hybrid EV System .................... 7-12Selector Lever (Joystick Type) .......................................................7-14Select Position indicator .................................................................7-15Electrical Parking switch ................................................................7-16Regenerative braking level selector (paddle) * ..............................7-17S-AWC (Super All Wheel Control) ................................................7-184-wheel drive operation ..................................................................7-20Inspection and maintenance following rough road operation.........7-21Cautions on the handling of 4-wheel drive vehicles.......................7-22Battery save switch .........................................................................7-22Battery charge switch......................................................................7-23Acoustic Vehicle Alerting System (AVAS) ...................................7-24Braking ...........................................................................................7-26Hill start assist.................................................................................7-27Brake assist system .........................................................................7-28Emergency stop signal system * .....................................................7-29Anti-lock brake system (ABS)........................................................7-29Electric power steering system (EPS).............................................7-32
Active stability control (ASC) ........................................................ 7-32Cruise control * .............................................................................. 7-35Speed Limiter * .............................................................................. 7-39Adaptive Cruise Control System (ACC) * ..................................... 7-43Forward Collision Mitigation System (FCM) * ............................. 7-55Lane Departure Warning (LDW) *................................................. 7-60Reversing sensor system *.............................................................. 7-63Rear-view camera * ........................................................................ 7-67Cargo loads ..................................................................................... 7-70Towing caravans and trailers .......................................................... 7-71
BK0203201EN.book 1 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Selector Lever (Joystick Type)7-14 Starting and driving
7
If the operation mode is in OFF and thedriver’s door is opened with the keyless oper-ation key in the key slot, the outer buzzersounds for approximately 3 seconds and theinner buzzer sounds for approximately 1 min-ute or warning display will appear to remindyou to remove the key.
E00636100054
E00636200026
Operate the selector lever slowly and securelyin the following method.˙ (home position) to “D” or “R”: Simply shiftthe lever.˙ (home position) to “N”: Shift and hold at“N” position for a while.˙ (home position) to “B”: You can shift theselector lever to “B” only when the selectposition is in “D” position.When shifted from
˙ (home position) to “B”,
the regenerative brake force will increase byone step.When shifted to “B” once again, the regener-ative brake force will become the maximum.When you shift the selector lever to “D”, theselect position returns to “D”.
The selector lever always returns to its homeposition when it is released.
Selector Lever (Joystick Ty p e )
Selector lever operation
(home position)
NOTE
zIf you operate the select lever to (B) twicetoo quickly, the regenerative brake force maynot become the maximum.WA R N I N GzDo not replace the selector lever knobother than MITSUBISHI MOTORS genu-ine part. In addition, do not hang anobject on the selector
lever as it may be a
cause of an accident.zWhen you shift the selector lever to “D” or“R” position, always
depress the brake
pedal with your right foot for your safety.Never shift the lever while depressing theaccelerator pedal. Doing so will start yourvehicle abruptly, which
may lead to a seri-
ous accident. It may also be a cause of fail-ure of vehicle.NOTE
zYo u c a n n o t o p e r a t e t h e r e g e n e r a t i v e b r a k ewhile the adaptive cruise control system(ACC) is operating.zEvery time operating the selector lever, besure to check the position displayed on theindicator.
BK0203201EN.book 14 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Regenerative braking level selector (paddle)*
Starting and driving 7-17
7
E00636700021
Regenerative braking level selector (paddle)can quickly change the regenerative brake force keeping your hand on the steeringwheel when you release your foot from theaccelerator pedal while driving.By pulling the regenerative braking levelselector, the brake force (amount of electricalenergy to charge the drive battery) can beadjusted according to the driving conditionsuch as before curve or a downhill.Regenerative braking level can be switched inthe 6 level from B0 (small regenerative brak-ing force) to B5 (large regenerative brakingforce).
Each time you pull the + (UP) paddle towardyou, the regenerative brake force lowers byone level.
Regenerative braking level selector (paddle)
*
CAUTIONzIf a large regenerative brake force is appliedon a slippery road, ty
res may skid. Always
drive safely in accord
ance with the prevail-
ing road condition.zIf you operate the right
and left paddles
simultaneously, a regenerative brake forcelevel may not change.
decrease in regenera-tive force
increase in regenera-tive force
NOTE
zRepeated continuous
operation of a paddle
will continuously change
the brake force lev-
els.zIf you turn on the cruise control when thelevel B0 or B1 (smaller regenerative brakeforce) is selected, the level is returned to thenormal level B2 automatically.zunder the cruise control, the level B0 or B1cannot be selected. The buzzer sounds if youtry to select these levels.zOn vehicles with the adaptive cruise controlsystem (ACC), you cannot control the regen-erative brake force le
vel while the adaptive
cruise control system
(ACC) is operating.
The buzzer sounds if you operate the pad-dles.
To d e c r e a s e g e n e r a t i v e f o r c e
BK0203201EN.book 17 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Cruise control*
Starting and driving 7-35
7
E00609102177
Cruise control is an automatic speed controlsystem that keeps a set speed. It can be acti-vated at about 40 km/h or more.
E00609302238
1. With the operation mode in ON, press theCRUISE CONTROL ON/OFF switch (A)to turn on the cruise control. The indicatordisplay in the meter cluster will come on.
CAUTIONzThe system may be malfunctioning.Park your vehicle in a safe place and stop thePlug-in Hybrid EV System.Restart the Plug-in Hybrid EV System andcheck whether the display/indicator goes out.If they go out, there is no abnormal condi-tion. If they do not go
out or appear fre-
quently, it is not necessary to stop the vehicleimmediately, but we recommend you to haveyour vehicle inspected.
Cruise control
*
CAUTIONzWhen you do not wish to drive at a set speed,turn off the cruise control for safety.zDo not use cruise control when driving con-ditions will not allow you to stay at the samespeed, such as in heavy traffic or on roadsthat are winding, icy, snow-covered, wet,slippery, on a steep downhill slope.NOTE
zCruise control may not be able to keep yourspeed on uphills or downhills.
zYo u r s p e e d m a y d e c r e a s e o n a s t e e p u p h i l l .Yo u m a y u s e t h e a c c e l e r a t o r p e d a l i f y o uwant to stay at your set speed.zYo u r s p e e d m a y i n c r e a s e t o m o r e t h a n t h e s e tspeed on a steep downhill. You have to usethe brake to control your speed. As a result,the set speed driving is deactivated.zThe regenerative level B0 or B1 cannot beselected under the cruise control. The buzzersounds if you try to
select these levels.
Cruise control switches

A-CRUISE CONTROL ON/OFF switch
Used to turn on and off the cruise control.
B-SET - switch
Used to reduce the set speed and to setthe desired speed.
C-RES + switch
Used to increase the set speed and toreturn to the original set speed.NOTE
D-CANCEL switch
Used to deactivate the set speed driving.NOTE
zWhen operating the cruise control switches,press the cruise control switches correctly.The set speed driving may be deactivatedautomatically if two or more switches of thecruise control are pressed at the same time.
To a c t i v a t e

BK0203201EN.book 35 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Cruise control*7-36 Starting and driving
7
2. Accelerate or decelerate to your desiredspeed, then push down and release theSET - switch (B). The vehicle will thenmaintain the desired speed.The “SET” indicator appears on the infor-mation display in the meter cluster.
E00609400668
There are 2 ways to increase the set speed.Push up and hold the RES + switch (C) whiledriving at the set speed, and your speed willthen gradually increase.
When you reach your desired speed, releasethe switch. Your new cruising speed is nowset.To increase your speed in small amounts,push up the RES + switch (C) for less thanabout 1 second and release it.Each time you press the RES + switch (C),your vehicle will go about 1.6 km/h faster.While driving at the set speed, use the accel-erator pedal to reach your desired speed andthen push down the SET - switch (B) andrelease the switch momentarily to set a newdesired cruising speed.
E00609500584
There are 2 ways to decrease the set speed.Push down and hold the SET - switch (B)while driving at the set speed, and your speedwill slow down gradually.When you reach your desired speed, releasethe switch. Your new cruising speed is nowset.
NOTE
zWhen you release the SET - switch (B), thevehicle speed will be set.
To i n c r e a s e t h e s e t s p e e d

RES + switch

Accelerator pedal

To d e c r e a s e t h e s e t s p e e d

SET - switch

BK0203201EN.book 36 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Cruise control*
Starting and driving 7-37
7
To s l o w d o w n y o u r s p e e d i n s m a l l a m o u n t s ,push down the SET - switch (B) for less thanabout 1 second and release it.Each time you push down the SET - switch(B), your vehicle will slow down by about 1.6km/h.While driving at the set speed, use the brakepedal, which disengages the cruise control,then push down the SET - switch (B) andrelease the switch momentarily to set a newdesired cruising speed.
E00609601234
Depress the accelerator pedal as you wouldnormally. When you release the pedal, youwill return to your set speed.
Depress the brake pedal to decrease thespeed. To return to the previously set speed,push up the RES + switch (C).Refer to “To resume the set speed” on page7-38.
Brake pedal

To t e m p o r a r i l y i n c r e a s e o r decrease the speed

To t e m p o r a r i l y i n c r e a s e t h e s p e e d

NOTE
zIn some driving conditions, the set speeddriving may be deactivated. If this happens,refer to “To activate” on page 7-35 andrepeat the speed setting procedure.
To t e m p o r a r i l y d e c r e a s e t h e s p e e d

BK0203201EN.book 37 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分