brake light MITSUBISHI OUTLANDER SPORT 2018 Owner's Manual (in English)

7OWN THE ROAD
TELESCOPIC STEERING WHEEL
Telescopic Steering Wheel - located on the left underside of the steering
column is a lever that unlocks the steering column and allows adjustment
of the height and distance of the steering wheel to the driver. When
adjustments* are complete, push the lever back to its original position to
lock the steering wheel in place.
*Adjust the steering wheel only when the vehicle is at a complete stop.
- CANCEL: To deactivate the cruise control.
- RES + : To increase the set speed or
resume previously set cruise control
operation.
- SET – : To set the desired speed and to
reduce the set speed.
- ON/OFF: To turn ON/OFF cruise control.
CRUISE CONTROL
TO SET A CRUISING SPEED
1. Press
and the CRUISE indicator light in the meter cluster
will illuminate.
2. Accelerate or decelerate to your desired speed (above 25 mph).
Press
and remove your foot from the accelerator pedal.
TO ACCELERATE OR DECELERATE SPEED
Press
to increase set cruising speed.
Press
to decrease set cruising speed.
TO CANCEL THE CRUISING SPEED
Press
, the brake pedal or press .
DRIVE MODE SELECTOR (IF EQUIPPED) The drive mode can be switched by pressing the 4WD button while the ignition switch is in the ON position.
THE FOLLOWING DRIVE MODES ARE AVAILABLE:
2WD: This mode is for economical driving on normal dry roads and freeways.
4WD AUTO: This mode is for all driving conditions on various roads.
4WD LOCK: This mode is for driving in slippery conditions such as on snow-covered roads or sand.

10TECHNOLOGY
ENGINE START SWITCH (IF EQUIPPED)STARTING THE ENGINE
1. Make sure the parking brake is applied.
2. Press and hold the brake pedal down with your foot.
3. Make sure the drive selector lever is in the “P” (Park) position.
4. Press the engine switch.
STOPPING THE ENGINE
1. Stop the vehicle.
2. Fully engage the parking brake while depressing the
brake pedal.
3. Move the selector lever to the “P” (Park) position and then
press the engine switch to stop the engine.
FAST-KEY (IF EQUIPPED)
The Free-hand Advanced Security Transmitter (FAST-key)
enables the engine to be started and the operation mode to be
changed simply by carrying it. While carrying the FAST-key, press
the driver’s door lock/unlock
switch
.
KEYLESS ENTRY SYSTEM
FAST-KEYNORMAL KEY
LOCK ( ) BUTTON
Press: Lock all doors
UNLOCK (
) BUTTON
Press: Once – Unlock driver door
Twice – Unlock all doors
PANIC BUTTON
Press and hold to sound alarm.
Press any button to turn off panic alarm.
ECO DRIVING When the ECO indicator light is on, your current driving style
supports good fuel economy. The ECO light will only work in
normal mode.

20
Q: How can I get the MPG stated on the window sticker?
A: Vehicle driving styles will greatly affect MPG.
• Avoid sudden starts from a stop and let the vehicle coast to a traffic light. Both of these styles will increase mileage and reduce brake lining wear.
• Vehicles are designed to achieve the best fuel mileage when they are driven at the speed limits on the freeway. Avoid driving over 65 mph.
• Under inflated tires will increase rolling resistance and will reduce fuel mileage. Check tire pressure frequently to increase miles per gallon.
Proper tire pressure also ensures optimum tire performance (including tire wear).
Q: Why does my Anti-Lock Braking System (ABS) make a noise?
A: Each time your vehicle is started and driven a short distance, you will hear the sound of the ABS motor operating from the right front engine
compartment. This is the normal sound the Anti-Lock Braking System makes when performing a self check.
Q: Why do my Rain Sensing Windshield Wipers operate on their own when it’s not raining?
A: • When the lever is in the AUTO position, the rain sensor detects rain or snow and automatically turns on the wipers.
• The wipers may automatically operate when things such as insects or foreign objects are affixed to the windshield on top of the rain sensor or
when the windshield is frosted over.
• To stop the wipers, place the lever in the OFF position.
Q: Why does my check engine light come on after I put gas in my car?
A: There are many reasons why your check engine light may illuminate. Before calling your dealership, make sure the fuel cap is fully engaged and you
have heard three clicks when tightening it. If after checking and hearing three clicks and driving for awhile the light is still on, contact
your dealership.
Q: How do I use the emergency key when the FAST-key battery or vehicle battery is run down?
A: Remove the emergency key from the FAST-key fob and manually unlock the door. Once inside the vehicle, insert the FAST-key fob into the slot in the
glove box. Starting the engine and changing the operation mode should now be possible. Remove the FAST-key from the slot after starting the engine
or changing the operation mode.
FAQ'S