MITSUBISHI OUTLANDER XL 2011 Owners Manual

MITSUBISHI OUTLANDER XL 2011 Owners Manual OUTLANDER XL 2011 MITSUBISHI MITSUBISHI https://www.carmanualsonline.info/img/19/58147/w960_58147-0.png MITSUBISHI OUTLANDER XL 2011 Owners Manual
Trending: keyless entry, width, coolant level, check engine light, suspension, brake light, horn

Page 661 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual 7-64 Vehicle care and maintenance
7
Side turn signal lights (on fender) (if so equipped)
N00943500111
NOTEIt is not possible to repair or replace only the bulb for the
side turn-signal light.
Check w

Page 662 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual Vehicle care and maintenance
7-65
7
Front fog lights
 (if so equipped)
N00943600633
1. Turn the bezel (A) counterclockwise to remove it.2. Remove the 3 screws (B) and remove the light unit.*- Front of

Page 663 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual 7-66 Vehicle care and maintenance
7
NOTEWhen unfastening the screws, be careful not to move the
beam position adjustment screw (C).3. While holding down the tab (D), pull out the socket (E).
BK012250

Page 664 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual Vehicle care and maintenance
7-67
7
4. Turn the bulb (F) counterclockwise to remove it. 5. To install the bulb, perform the removal steps in reverse.
CAUTION
!Handle halogen light bulb with care. The

Page 665 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual 7-68 Vehicle care and maintenance
7
Rear combination lights
N00943700432
1. Remove the screws (A) that hold the light unit and remove
the light unit.2. Turn the socket and bulb assembly counterclockwi

Page 666 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual Vehicle care and maintenance
7-69
7
3. Pull the bulb out of the socket. 4. To install the bulb, perform the removal steps in reverse.
NOTEWhen mounting the light unit, align the clips (D) on the
ligh

Page 667 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual 7-70 Vehicle care and maintenance
7
Back-up lights
N00929100041
1. Open the tailgate.
2. Insert a screwdriver into the notch of the cover and pry
gently to remove the cover.NOTEWrap a cloth around th

Page 668 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual Vehicle care and maintenance
7-71
7
4. Pull the bulb out of the socket.
5. To install the bulb, perform the removal steps in reverse.
Rear side-marker lights
N00935400094
1. Open the lower gate and pu

Page 669 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual 7-72 Vehicle care and maintenance
7
3. Remove the light mounting screw (B) and remove the
light unit.4. Remove the socket and bulb assembly (C) together by
turning it counterclockwise, and then remove

Page 670 of 714

MITSUBISHI OUTLANDER XL 2011  Owners Manual Vehicle care and maintenance
7-73
7
NOTEWhen mounting the light unit, align the pins (D) on the
light unit with the hole in the body.
License plate lights
N00944000360
1. When removing the light unit
Trending: spare tire, tire pressure, heating, air filter, engine overheat, hood release, queen