instrument panel NISSAN 350Z 2007 Z33 Power Steering System Workshop Manual

PS-10
STEERING COLUMN
Revision: 2006 November2007 350Z
STEERING COLUMNPFP:48810
Removal and InstallationNGS0000C
COMPONENTS
CAUTION:

Care must be taken not to give axial impact to steering column assembly during removal and
installation.

Care must be taken not to move steering gear during removal of steering column assembly.
REMOVAL
1. Set vehicle to the straight ahead-direction.
2. Remove driver air bag module from steering wheel. Refer to SRS-40, "
DRIVER AIR BAG MODULE" .
3. Disconnect steering switch connector, remove steering wheel lock nut, then remove steering wheel. Refer
to PS-7, "
STEERING WHEEL" .
4. Remove dash side finisher (LH). Refer to IP-10, "
INSTRUMENT PANEL ASSEMBLY" .
5. Remove instrument driver panel lower. Refer to IP-10, "
INSTRUMENT PANEL ASSEMBLY" .
6. Remove column lower cover and combination meter (which is connected with steering column upper
cover) from steering column assembly. Refer to DI-24, "
Removal and Installation for Combination Meter" .
1. Lower joint 2. Lower shaft 3. Hole cover
4. Clamp 5. Hole cover seal 6. Collar
7. Steering column assembly 8. Combination switch & spiral cable 9. Escutcheon
10. Column lower cover 11. Right lid 12. Combination meter & column upper cover
13. Steering wheel 14. Steering wheel lock nut 15. Left lid
16. Driver air bag module
SGIA0339E