transmission NISSAN 350Z 2007 Z33 Propeller Shaft Workshop Manual
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2007, Model line: 350Z, Model: NISSAN 350Z 2007 Z33Pages: 10, PDF Size: 0.29 MB
Page 6 of 10
PR-6
REAR PROPELLER SHAFT
Revision: 2006 November2007 350Z
ComponentsNDS00005
Removal and InstallationNDS00006
REMOVAL
1. Set transmission to neutral position.
2. Release parking brake.
3. To keep space for removing propeller shaft, first detach rear-side
mounts (4 locations) of exhaust tube and main muffler. Then
lower exhaust tube and main muffler, and support them with jack
or equivalent. (See the figure.)
4. Attach protector (special service tool) to propeller shaft. (When
reused.)
1. Propeller shaft
PDIA0645E
PDIA1274E
Tool number : — (J-46208)
SDIA1091E
Page 10 of 10
PR-10
SERVICE DATA AND SPECIFICATIONS (SDS)
Revision: 2006 November2007 350Z
SERVICE DATA AND SPECIFICATIONS (SDS)PFP:00030
General SpecificationsNDS00007
Propeller Shaft Runout LimitNDS00008
Applied modelVQ35DE
M/T A/T
Propeller shaft model 2S80A CFRP
Number of joints2
Coupling method with transmission Sleeve type
Type of journal bearings Shell type (Non-disassembly type)
Distance between yokes 95 mm (3.74 in)
Shaft length (Spider to spider) 1321 mm (52.007 in) 1283 mm (50.512 in)
Shaft outer diameter 85.0 mm (3.346 in)
Model2S80A CFRP
Propeller shaft runout limit 1.5 mm (0.059 in) or less