height NISSAN 350Z 2007 Z33 Roof Workshop Manual
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2007, Model line: 350Z, Model: NISSAN 350Z 2007 Z33Pages: 130, PDF Size: 5.4 MB
Page 119 of 130
SOFT TOP
RF-119
C
D
E
F
G
H
J
K
L
MA
B
RF
Revision: 2006 November2007 350Z
Apply approximately 5 mm (0.2 in) thick EPT seal to retainer
back surface.
WATER LEAKAGE TEST
Visually check for water leakage after repairing.
1. 2 workers are required. One worker checks inside the vehicle, and the other one washes with water.
2. Use 13 mm (0.51 in) diameter hose. Adjust water pressure by following method.
Hold the hose horizontally, and release water at 1000 mm
(39.37 in) height from ground. Adjust the distance, between the
ground point just below the hose and the water dropping point,
to reach 700 mm (27.56 in). (See the figure.)
3. Keeping the distance between the hose and the testing area by
100 mm (3.94 in), apply water along the area 3 times. During
applying water, move the hose by 100 mm (3.94 in)/sec speed.
4. Visually check for water leakage.
PIIB1173E
PIIA8559E
Page 128 of 130
RF-128
STORAGE LID
Revision: 2006 November2007 350Z
Secure left, right, and front end of storage room finisher with remaining part when removing using double-
faced adhesive tape.
Adjustment of Storage LidNIS00084
ADJUSTMENT IN FULLY CLOSED POSITION
A-A Clearance Adjustment
Loosen nuts of storage lid hinge. Adjust storage lid until the clear-
ance is within the specification.
B-B Clearance Adjustment
Loosen nut of storage lid striker lock, and adjust it until the clearance is within the specification.
C-C Clearance Adjustment, A-A Evenness Adjustment
Loosen nuts of storage lid hinge. Adjust storage lid height by
exchanging or adding shim until the evenness is within the specifica-
tion.
PIIA7884E
PIIA8857E
PIIA7954E