oil temperature NISSAN 350Z 2007 Z33 Supplemental Restraint System Workshop Manual

DRIVER AIR BAG MODULE
SRS-41
C
D
E
F
G
I
J
K
L
MA
B
SRS
Revision: 2006 November2007 350Z
CAUTION:

Always work from the side of driver air bag module.

Always place driver air bag module with pad side facing
upward.

Do not insert any foreign objects (screwdriver, etc.) into
driver air bag module.

Do not disassemble driver air bag module.

Do not use old bolts after removal; replace with new bolts.

Do not expose the driver air bag module to temperatures
exceeding 90°C (194°F).

Replace driver air bag module if it has been dropped or sus-
tained an impact.

Do not allow oil, grease or water to come in contact with the
front passenger air bag module.
INSTALLATION
Install in the reverse order of removal.
CAUTION:

For installing the air bag module, tighten the TORX bolts (T30).

After the work is completed, perform self-diagnosis to make sure that no malfunction is detected.
Refer to SRS-27, "
SRS Operation Check (USER MODE)" .
PHIA0164E
SBF814E

SRS-46
SIDE CURTAIN AIR BAG MODULE (FOR COUPE)
Revision: 2006 November2007 350Z
SIDE CURTAIN AIR BAG MODULE (FOR COUPE)PFP:985P0
Removal and InstallationNHS0000W
REMOVAL
CAUTION:

Before servicing SRS, turn the ignition switch off, disconnect both battery cables and wait at least
3 minutes.

Do not use air tools or electric tools for servicing.
1. Remove headlining. Refer to EI-44, "
Removal and Installation (for Coupe Models)" .
2. Disconnect side curtain air bag connector.
3. Remove side curtain air bag module fixing bolts and clip.
4. Remove the side curtain air bag module.
CAUTION:

Always place the side curtain air bag module with the
warning label facing upward.

Do not disassemble side curtain air bag module.

Do not insert any foreign objects (screwdriver, etc.) into
air bag module connector.

Replace side curtain air bag module if it has been
dropped or sustained an impact.

Do not expose the air bag module to temperatures
exceeding 90°C (194°F).

Do not allow oil, grease or water to come in contact with
the side curtain air bag module.
PHIA0660E
1. Side curtain air bag module 2. Clip 3. Bolt
PHIA0171E
SBF814E