POWER SEAT ADJUSTMENTS (if so equipped)
To slide the seat forward or bac kward, push the
control switc
h
01 forward or backward.
To adjust the angle of the seatback, push the switch
02 forward or backward.
S
EA
T
LIFTER
(if so equipped for driver
’s seat)
To adjust the angle and height of the seat cushion,
push the front or rear end of the switc
h
01 up or down.
LUMBAR SUPPORT (if so equipped for driver’s seat)
To adjust the seat lumbar area, push the front or rear end of the switch
03 .
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)”\
of your
Owner’s Manual.
0102
03
OUTSIDE MIRROR CONTROL SWITCH
To select the right or left side mirror, move the control
switc
h
01 right or left.
To adjust the mirror angle, push the control switch
02
up, down, right or left.
To prevent accidentally moving the mirror,
set the
control switc
h
01 to the middle “neutral” position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
10
02
01
STARTING/STOPPING THE ENGINE
Depress the brake pedal.
•
If the brake pedal is not depressed, pushing the
ignition switc
h once enters the A
c
c mode.
•
If the ignition is pushed a second time, the vehicle
will enter the O
N mode.
Move the shift lever to P (PARK).
Push the ignition switc h to start the engine.
NOTE: It is important to make sure the NISSAN Intelligent
k
ey
® is with you (that is, in your pocket or purse).
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position and apply the parking brake.
Press the ignition switch START/STOP button to turn the engine off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
first drive features
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1482394_13d_AltimaSedan_QRG_030613.indd 103/6/13 1:17 PM
