NISSAN ALTIMA COUPE 2010 D32 / 4.G Navigation Manual

INFO:
If “Select a City” is selected, a city name input
screen is displayed. Specify the city to search for
before narrowing down the categories.
●Enter the city name, select “List”. To select the
city from the recently set destinations, select
“Last 5 Cities” instead of entering the name.
●Select the preferred city from the list .5. Select the main category from the list.INFO:
To select the category by directly inputting the
category name, select “Category Search”. The
category name input screen is displayed.
NDE0019NDE0020NDE0021
4-10Setting a destination

6. Select the subcategory.
INFO:
Subcategories may not exist depending on the
category that is selected.7. Enter the name of the destination facility
and select “List”.
The facility list is displayed.
INFO:
●It is not necessary to enter the facility name
completely. It is also possible to display the
list screen only by selecting “List” without en-
tering the facility name .
●The number of narrowed down points are dis-
played in the “Matches” column.
●Up to two keywords (part of the facility name)
can be entered by selecting “AND Search” af-
ter entering the first facility name.
INFO:
The facility name can also be entered directly by
selecting “Choose Name” on the main category
list screen.
NDE0022NDE0023NDE0024
Setting a destination4-11

8. Select the preferred destination from the
list.
INFO:
●By selecting “Sort”, options can be sorted
from “By Name” or “By Distance”. When se-
lecting “By Distance”, the position of the se-
lected location is displayed in the preview on
the right side of the screen.
●In some cases, when a facility name has been
entered, the number of matching destinations
in the “Matches” column may be different from
the number displayed on the list screen. If this
occurs, enter more characters to further re-
duce the number of matches.
●The search conditions can be changed by se-
lecting “Refine”.9. The entire route is shown on the map. Se-
lect “Start” after confirming the location of
the displayed destination. The system sets
the destination to the selected location and
starts calculating a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can be
stored, etc.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
Searching for a restaurant by Zagat
rating
1. Press DEST.
2. Select “Places”.
NDE0025NDE0026NDE0012
4-12Setting a destination

3. Select “ZAGAT”. 4. Select the preferred state. A list screen is
displayed.5. Select the preferred city. A list screen is
displayed.
NDE0027NDE0028NDE0029
Setting a destination4-13

Searching for a restaurant:
1. Select “RESTAURANT”. A list screen is
displayed.2. Select the preferred category. A list screen
is displayed.3. Select the preferred sorting order. A list
screen is displayed.
NDE0030NDE0031NDE0032
4-14Setting a destination

4. Select the preferred destination facility from
the list.
INFO:
●By selecting “Sort”, sorting options can be
selected to re-sort the list.
●The search conditions can be changed by se-
lecting “Refine”.
●By selecting “Ratings”, an explanation of the
Zagatratings can be displayed.5. The entire route is shown on the map. Se-
lect “Start” after confirming the location of
the displayed destination. The system sets
the destination to the selected location and
starts calculating a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can be
stored, etc.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
©2009 ZagatSurvey, LLC. ZagatSurvey is a
registered trademark of ZagatSurvey, LLC
SETTING HOME LOCATION
The home location can be set as the destination
to which the system calculates a route. This
function is especially useful when searching for a
route to return to the home location.
NDE0033NDE0034
Setting a destination4-15

1. Press DEST.
2. Select “Home”.3. A confirmation message is displayed, and
the system sets the home location as the
destination.
INFO:
If the home location is not stored yet, the system
will automatically display a screen for storing it.
“STORING A LOCATION”
(page 6-2)4. The entire route to home is shown on the
map. Select “Start” after confirming the lo-
cation of the displayed destination. The sys-
tem sets the destination to the selected lo-
cation and starts calculating a route.
Voice command
1. Press
located on the steering wheel
switch.
2. After the tone sounds, speak a command.
To set the home location as the destination:
“Navigation” “Home” (Standard mode)
“Home” (Alternate command mode)
NDE0035NDE0036NDE0037
4-16Setting a destination

SETTING BY ADDRESS BOOK
A location stored in the Address Book can be
set as the destination to which the system calcu-
lates a route. To utilize this function more
effectively, destinations that are often traveled to
should be stored in advance.
1. Press DEST.
2. Select “Address Book”. A list screen is
displayed.3. Select the preferred location from the list.
INFO:
●Selecting “Sort” displays a list of various sort
functions. To use the sort functions, stored lo-
cations must be set in advance.
“EDITING THE STORED HOME
AND ADDRESS” (page 6-14)
NDE0038NDE0039
Setting a destination4-17

INFO:
●Sort by Number:
The Address Book entries are displayed in as-
cending numerical order.
●Sort by Name:
The Address Book entries are displayed in al-
phabetic order.
●Sort by Icon:
By selecting a particular icon, a list that con-
tains only the Address Book entries associ-
ated with that icon is displayed.
●Sort by Group:
By selecting a particular group (family, friends,
leisure, etc.) , the selected group is displayed
at the top of the list.4. The entire route is shown on the map. Se-
lect “Start” after confirming the location of
the displayed destination. The system sets
the destination to the selected location and
starts calculating a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can be
stored, etc.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
Voice command
1. Press
located on the steering wheel
switch.2. After the tone sounds, speak a command.
To set the destination from the Address
Book:
“Navigation” “Address Book” (Standard
mode)
“Address book” (Alternate command mode)
SETTING A PREVIOUS DESTINA-
TION
A previously set destination can be set again as
the destination to which the system calculates a
route. Up to 300 previous destinations will be
automatically stored.
If the number of previous destinations exceeds
300, the oldest one will be replaced by the new
one.NDE0040NDE0041
4-18Setting a destination

1. Press DEST.
2. Select “Destinations”. A list screen is
displayed.INFO:
By selectingBy Date, the list can be sorted in
chronological order. By selectingBy Name,it
can be sorted in alphabetical order.
3. Select the preferred destination from the
list.4. The entire route is shown on the map. Se-
lect “Start” after confirming the location of
the displayed destination. The system sets
the destination to the selected location and
starts calculating a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can be
stored, etc.
“PROCEDURES AFTER SETTING A
DESTINATION” (page 5-2)
Voice command
1. Press
located on the steering wheel
switch.
NDE0042NDE0043NDE0044
Setting a destination4-19