key NISSAN ALTIMA HYBRID 2010 L32A / 4.G Quick Reference Guide

21
“Would you like to access
Phone, Navigation, Information,
Audio or Help?”
After the tone sounds and the icon on the screen changes from
to
, say:
“Phone” or “navigation” or “information”
“Audio” or “Help”
Saying “Help” will display the user Guide explained later in this guide. continue listening to the
prompts and respond after the tone until the desired operation is completed. Remember to wait for the
tone before speaking. for proper recognition of phone numbers and street names, please review the
operating tips below. The commands shown in the menus above are available in Standard Mode. To
access an expanded list of commands, please see “Alternate command Mode” in this guide.
S ySTe M OP eRATin G TiPS
Before Starting
To get the best possible performance out of the Voice Recognition system, observe the following:

The interior of the vehicle should be as quiet as possible. close the windows to minimize the
surrounding noises.

Wait until the tone sounds before speaking a command.

Speak in a natural conversational voice with minimal pauses between words.

if you want to repeat a step or if the system incorrectly recognizes your command, push the

switch on the steering wheel or select the “
BA
ck” key on the display.

if the system does not recognize your command, please repeat the command \
again.
However, avoid raising the volume of your voice or slowing down your speech unless the
system prompts you to do so. Speaking too slowly reduces recognition acc\
uracy.

To give commands quickly, press the
switch to interrupt the voice guidance.

4. After the tone, do one of the following:

Say “ diAL nu MB eR” to dial a 7- or 10-digit
phone number only. Then, follow the prompts to
begin saying the phone number starting with the
area code. After the phone number has been
recognized, say “ diAL.” if incorrect, say
“cHAn Ge nu MBeR.”

Say “V eH ic Le PHO neBOO k” to say the voice
tag of one of up to 40 phone numbers you have stored in the vehicle.

Say “HAnd SeT PHO neBOO k” to say the name of one of up to 1,000 contacts down
loaded from your phone handset. ( note: The order of contact information (first name, last
name) transferred depends on the phone manufacturer. The name must be spoken as
shown in the Handset Phonebook list.)

Say “c ALL HiSTOR y” to select between incoming, outgoing and missed call lists.

Say “inTe RnATi OnAL c ALL” to dial a number longer than 10 digits.
Receiving/Ending a Phone Call

There are no voice commands for receiving or ending
a phone call.

To accept the call, push the switch on the steering
wheel or select the “Answer” key on the display. To
reject the call, select the “Reject call” key. To hang-up,
push the
switch or select the “Hang-up” key.

Pushing the
switch during a connected phone call
will allow you to send digits and special characters.
After speaking the desired digits, press the ENTER
button to send the recognized information.
Setting a Destination to a Street Address
1. Push the

switch on the steering wheel.
2. The system responds with: “Would you like to access
Phone, navigation, information, Audio or Help?”
3. Say “nAVi GATiOn.”
4. The system announces, “Please say Home, Address,
Places, Address Book or Previous destinations.”
5. Say, “ AddR eSS.”
23

26
NAVIGATION SYSTEM (if so equipped)
GeTTin G STARTed
The navigation System starts up when the ignition switch is placed in the A cc or On position.
To help ensure safe driving, some functions are grayed out, or muted, while driving. Par\
k the
vehicle in a safe location and then operate the navigation System.
nAVi GATi On di SPLA y ScReen

displays navigation features and map.
di SABLed WH iLe d RiVin G
not all features can be manually operated
while the vehicle is in motion. The text for
these restricted features turns from white
to gray and cannot be selected. Alternatively,
the voice recognition system may have a
related command that can be used
at anytime.
dAy /ni GHT B uTTOn
Press the
button 01 to switch between the day screen (bright) and the night

screen (dark). Within 10 seconds of pressing the
button 01 , you can adjust the
brightness of the map display screen by pressing the or directional keys.
03
04
05
06
01
02

uSinG THe TOucH-ScR een
To maneuver around the navigation display
screen, touch the screen to select the
item or key displayed. To move around
the map screen, touch and hold to scroll
around.
SeTTin G BuTTO n
Press the SETTING button 06 to change

or set navigation preferences.
deST (de STinATi On) B uTTO n
Press the DEST button 03 to display the
address book and alternative ways of
programming a destination.
MAP B uTTOn
Press the MAP button 02 to display the
current location map screen.
infO B uTTOn
Press the INFO button 05 to set or view
various information that is helpful for using
the vehicle safely and comfortably.
27

ROuTe B uTTOn
Press the ROUTE button 04 to display
various ways to modify the route to a
destination.
ZOOM O uT/in key S
Select the “Zoom Out” key or the “Zoom
i n” key to increase or decrease the scale
of the map display.
BAck key
Select the “
B
Ack ” key to return to
the previous function shown on the
navigation display.
SWiTc Hin G TH e MAP VieW
Press the MAP button 02 . The current
location map screen is displayed.

Select the “Map Menu” key.

Select the “Map View” key.


28

29
Select the “ change View” key.

Select either one of the “2 d” keys or one
of the “Birdview (3 d)” keys to select the
map view. Press the MAP button
02 or
select the “
B
Ack ” key to accept the
changes.
2d

displays the map in a 2-dimensional
environment similar to a road map.
BiRd Vie W™
d isplays the map in an elevated or
3-dimensional perspective.
SeLec TinG A M enu S cReen
1. To select a preferred menu key, touch the corresponding key on the screen.
2. depending on the key you selected, a detailed menu screen, a character input screen or
a setting screen, etc., is displayed. On the screen displayed, make adju\
stments, input
information, etc., accordingly.
3. Select the “

B
Ack ” key to return to the previous screen without applying any changes;
in some cases, selecting the “

B
Ack ” key will accept the changes you made.
4. Press the MAP button
02 to return to the current location map.
n OTe: depending on the menu selected, pressing the MAP button
02 may not return you to the
current location map screen.
STOR inG y OuR HOM e in yOuR Add ReSS BOO k
Press the DEST button 03 .

Select the “Home (Add new)” key. if you
have already stored your home this key
may not appear.

When you select the “Home (Add new)”
key, a confirmation message is displayed.
Select the “y es” key.

Select the “Street Address” key. A
character input screen is displayed.

e nter the street number of your home,
then select the “O k” key.

e nter your street name, select the ‘List”
key. The map screen is displayed.

y our home is displayed at the center of
the map.

A confirmation message is displayed and
the system sets your home as the
destination. Select the “O k” key.

Press the MAP button 02 to return to the
current location map screen.
30

31
SeTTin G A STR eeT Add ReSS AS A de STinATiOn
Press the DEST button 03 .

Select the “Street Address” key. A
character input screen is displayed.

e nter the house number; when finished
select the “O k” key. if you do not know
the house number, select the “ no House #”
key.

e nter the name of the street. After finishing
the entry, select the “List” key. A list of
possible street addresses is displayed.

Select the correct address of the
destination from the list. you might need
to select the “ up” or “ down” key to find
the preferred street address key.

The selected destination will be briefly
displayed before showing the entire route.
Select the “Start” key after confirming the
displayed route is acceptable. The voice
guidance will begin shortly.

MOVinG ARO und W iTHin A MAP
you can manually move across the map to view the surrounding area or to v\
iew a preferred location.

Touch the screen in the direction that you
want to move across the map. Once you
begin moving on the map, the cross
pointer appears.

Press the MAP button 02 or select the
“
B
Ack ” key to return to the current
location map screen. The cross pointer
disappears.
SeTTin G A PLA ce AS A de STinATiOn
Press the DEST button 03 .

Select the “Places” key.

Select the preferred nearby category from
the list.

Select the preferred destination from the
list. The position of the selected location is
displayed on the right side of the screen.
n OT e: A maximum of 100 facilities can be displayed on the list screen. if the suggested route
is already set, by selecting the “Show Along Route” key, the system displays only the facilities
located along the route.
32

The selected destination will be briefly
displayed before showing the entire route.
Select the “Start” key after confirming the
displayed route is acceptable. The voice
guidance will begin shortly.
ROuTe G uidAnce
While following the route guidance, press the
MAP button
02 to change from a split screen
to a full screen view of the map.
By default, the split screen will show a turn list
and possibly freeway exits. When approaching
an intersection or freeway junction, a second
split map screen is available to show the details
of that intersection or junction.
33