NISSAN ARMADA 2012 1.G Quick Reference Guide

9To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
04 station s
ElEC t Buttons

eighteen stations can be set in any combination of f M, AM and XM satellite radio stations.

To store a station in a preset, first select a preset bank A, B or c by pressing the
PrEs Et a·B·C button

05 .

Then select the radio band by pressing the AM•FM/SAT button
06 and tune to the

desired AM, f M or XM satellite radio station.

Next, press and hold the desired station select button (1-6) until a beep is heard and the
sound is briefly muted. The channel indicator will appear and the sound will resume.
Programming is now complete.

To retrieve a previously set station, select the radio band where the preset was stored
then press the corresponding station select button (1-6).
for more information, refer to the “monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
Cruis E Control
The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.

The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.

To activate the cruise control, push the ON•OFF
switch

01 . The C
ruisE indicator light in the
vehicle information display will illuminate.

To set cruising speed, accelerate the vehicle to the
desired speed, push the COAST•SET switch

02
and release. The s
Et indicator light in the vehicle
information display will illuminate. Take your foot off
the accelerator pedal. Your vehicle will maintain the set speed.

To reset at a faster cruising speed, push and hold the ACCEL•RES switch
03 . When the
vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the COAST•SET switch
02 . Release

the switch when the vehicle slows to the desired speed.

To cancel the preset speed, tap the brake pedal or push the C anCEl switch
04 .

To turn off cruise control, push the ON•OFF switch
01 . Both the C
ruisE
indicator light and s Et indicator light in the vehicle information display will turn off.
for more information, refer to the “starting and driving (section 5)” of your Owner’s Manual.
03
02
04
01

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.10
fuEl-fillE r Door
The fuel-filler door is located on the driver’s side of
the vehicle.

To open the fuel-filler door, pull the lid open.
for more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
first drive features

system guide
triP Com PutEr (if so equipped)
Press the info button on the control Panel, then
select the “Trip computer” key using the ni SSAn
controller and press the E ntEr button.

The trip computer will display the following items:
• Elapsed t ime – Journey time since the last reset.
• Driving Distance – distance driven since the last reset.
• average speed – Average speed driven since the last reset.
for more information, refer to the “monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.11
Blu Etooth® han Ds-fr EE Phon E systEm (if so equipped)
With an overhead microphone and sound
transmitted through the audio system speakers,
the Bluetooth
® Hands-free Phone System utilizes
Bluetooth wireless technology and voice recognition
to provide hands-free cellular phone communication.

A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTe M OPeRATin G TiPS
close all windows. Surrounding noises may interfere
with system operation and performance.

Press the
button on the steering wheel to activate
voice recognition.

Wait for the tone before speaking.

Begin speaking a command within 5 seconds of the tone.

Speak in a clear and natural voice without pausing between words.

Look straight ahead and avoid speaking too loudly or too softly.

To go back to the previous command, say “Go back” or “correction.”

To cancel a voice recognition session, simply wait 5 seconds, say “cancel” or “Quit,” or press
the

button.


To interrupt the system voice and give a command quickly, press the
button.


When speaking Phonebook names, please be aware some phones require the la\
st name to be
spoken before the first name. For example, “Michael Smith” may be spoken as “Smith Michael”.

To increase or decrease the volume of the voice prompts, push the volume \
control switch vol
on the steering wheel up or down or turn the VOL/ON•OFF control knob on the audio system
while the system is responding.
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.
Bluetooth® Controls
microphone

system guide
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.12
if the Voice Recognition system does not recognize your voice commands, train th\
e system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.

Some commands are not available while the vehicle is in motion.

The “Help” command can be used to hear a list of available commands\
at any time.

Please refer to the cellular phone manufacturer’s Owner’s Manual f\
or detailed information
regarding your Bluetooth phone.

for recommended phones and detailed instructions, please visit
www.nissanusa.com/bluetooth.
Blu Etooth systE m Without navi Gation (if so equipped)
PA iR inG PROcedu Re
n OTe: The vehicle must be stationary when pairing
the phone.
1. Press the

button on the steering wheel and wait

for the tone.
2. Say “Setup.”
3. Wait for the tone, then say “Pair phone.”
4. Wait for the tone, then say “new phone.”
5. initiate connecting from the phone.

The pairing procedure varies according to each cellular phone model. f or detailed pairing
instructions and a list of compatible phones, please visit www.nissanusa.com/bluetooth.

When prompted for a PASS keY code, enter “1234” from the handset. (The PASS keY
code is assigned by ni SSAn and cannot be changed.)
6. Say a name for the phone when the system asks you to provide one. You can give the phone
a name of your choice.
7. Say a number between 1 and 5 when the system asks you for a priority leve\
l. The priority
level determines which phone interacts with the system when two or more paired phones are
active in the vehicle at the same time. choose 1 if this is the only phone or the primary phone.
8. Say “Yes” or “no” when the system asks if you would like to select a custom ring ton\
e.
f ollow the instructions provided by the system to choose a ring tone.
PHOneBOOk SeTu P
each paired phone has its own dedicated phonebook. each phonebook can store up to 40
names. each name can have up to four locations/numbers: Home, Office, Mobile and\
Other.
n OTe: The vehicle must be stationary when adding new entries.
1. Press the

button and wait for the tone.

2. Say “Phonebook.”
3. Wait for the tone, then say “new entry.”

4. When prompted, say the name for the new entry. For example, say “Michelle.” If the name is too
short or too long, or if it sounds too much like a name that is already stored in the phonebook,
the system tells you and prompts you to say a name again. choose a new name.
5. Say “Yes” or “no” when the system asks you to confirm the name is correct.
6. Say a location (“Home,” “Office,” “Mobile” or “Other”) when the system asks you to provi\
de
one. The system acknowledges the location.

By voice command - When prompted, say a phone number for the location. For example,
say “five five five one two one two.” The system repeats the number and prompts you for
the next command.

By Bluetooth® transfer - Say “Transfer entry.” The system acknowledges the command and
asks you to initiate the transfer from the phone handset. The new contact phone number will
be transferred from the cellular phone via the Bluetooth
® communication link. The transfer
procedure varies according to each cellular phone. See the cellular phone Owner’s
Manual for details.
7. Say “Store” when you are finished entering numbers. The system confirms the name, location
and number.
8. Say “Yes” or “no” when the system asks if you would like to store another location f\
or the same
name. if you do not respond to the system prompt, the system ends the new entry session.
MAkinG A cALL
1. Press the
button.

2. After the tone, do one of the following:

Say “Call [name] [location].” For example, say “Call Michelle Home.”

Say “Call [number].” For example, say “Call 123-456-7891.”

Say “Redial” to redial the previous phone number called by the syst\
em.

Say “call international” to dial more than 10 digits or any special characters.
3. When you have finished speaking the phone number, wait for the system to repeat it back
to you, then say “dial.”
ReceiVin G/endin G A cALL
When you receive a phone call, a ring tone sounds through the audio syste\
m.

To accept the call, press the
button. To reject the call, press the
button.


To hang up the phone at the end of a call or to disconnect during call pl\
acement, press
the

button.
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.13

system guide
Blu Etooth systE m With naviGation (if so equipped)
PA iR inG PROcedu Re
n OTe: The vehicle must be stationary when pairing
the phone.
1. Press the Phon E button on the control panel or
press the

button on the steering wheel.
2. Select the “Pair phone” key on the touch-screen.
3. Select one of the “none (Add new)” keys.
4. initiate pairing from the phone.

The pairing procedure for cellular phones varies according to each cellular phone
model. f or detailed pairing instructions and a list of compatible phones, please visit\

www.nissanusa.com/bluetooth.

When prompted for a P in code, enter “1234” from the handset. (The P in code is assigned
by niSSAn and cannot be changed.)
5. When pairing is complete, the screen will show the phone’s listed name\
on the paired phone
list screen.
PHOne BOOk SeTu P
up to 40 phone numbers can be stored in the phonebook.
n OTe: The vehicle must be stationary when adding
new entries.
1. Press the s EttinG button, then touch the “Phone” key.
2. Touch the “Phonebook” key.
3. Touch one of the “none (Add new)” keys from the
name list of the phonebook. There are different
methods to input a phone number. Select one of the
following options:

enter data by k eypad - input the name and phone
number manually.

copy from downloaded Phonebook - Select an
entry from a list of phone numbers you have
already transferred from your phone to your vehicle.

copy from Outgoing call Logs - Store the name and phone number from the outgoing call list.

copy from incoming call Logs - Store the name and phone number from the incoming call list.

Transfer via Bluetooth - Transfers an entry from your cellular phone to the vehicle’s phonebook\
.
The sending procedure from the cellular phone varies according to each cellular phone model.
See the cellular phone manufacturer’s Owner’s Manual for more details.
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.14

MAkinG A PHO ne cALL
To make a call, follow the procedures below:
1. Press the Phon E button on the instrument panel or
the

button on the steering wheel. The “Phone”
screen will appear on the display.
2. Select the “call (Phonebook)” key on the “Phone”
menu, and press the E ntEr button.
3. Select the registered person’s name from the list, and
press the E ntEr button. dialing will start.
Recei Vin G/endin G A PHOne cALL
There are no voice commands for receiving or ending
a phone call.

To accept the call, press the
button on the steering
wheel or touch the “Answer” key.

To reject the call, touch the “Reject call” key.

To hang up, press the
button or touch the

“Hang-up” key.

Pressing the
button during a connected phone call will allow you to send digits and
special characters. After speaking the desired digits, press the E ntEr button to send the
recognized information.
for more information, refer to the “monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual or please visit www.nissanusa.com/bluetooth.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
15

nissan moBilE EntErtainm Ent systE m (mEs) (if so equipped)
With this entertainment System, you can play video
files via a d Vd or cd, providing images and sound
from the front and rear display screens.

You can also connect auxiliary devices such as video
games, camcorders or portable video players to the
auxiliary jacks. (Your device will be controlled through
its own control panel.)

use the remote controller provided with the system,
to operate the rear display screen.

use the headphones, also provided with the system,
to listen to audio wirelessly.

To view movies on the front display, stop the vehicle in a safe location, move the shift lever to
the P (P ark) position and apply the parking brake.

To reduce driver distraction, movies will not be shown on the front display while the vehicle is
in any drive position.
for more information, refer to the “monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.16
system guide
naviGation systE m (if so equipped)
Your navigation System can calculate a route from the current location to a pr\
eferred destination.
The real-time map display and turn-by-turn voice guidance will lead you a\
long the route.

The navigation System will continually update your vehicle’s position. if you have deviated
from the original route, it will recalculate the route from your current\
location.

Press the info button to access important data such as distance to empty, your tire
pressure and maintenance interval reminders.
for more information, refer to your navigation System Owner’s Manual.

homElink® univErsal trans CEivE r (if so equipped)
The HomeLink® system can learn and consolidate the functions of up to three different\

hand-held transmitters, operating items such as garage doors, property gates, outdoor
and indoor lights or alarm systems.
for more information, refer to the “instruments and controls (section 2)” of your Owner’s Manual, the HomeLink® website at
www.homelink.com or call 1-800-355-3515.
homElink®
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.17

nissan, the nissan Brand Symbol, Z and
nissan model names are nissan trademarks.
© 2011 nissan north America, inc.
QR
2e TA60u1
Printing: October 2011 (22)
To view detailed instructional videos,
go to www.nissanownersinfo.mobi/2012/armada
or snap this barcode with an appropriate barcode reader.
This Quick Reference Guide is intended to provide an overview of some of the uniq\
ue features of your new vehicle. See your
Owner’s Manual, which contains important safety warnings and information about the operation and maintenance of your vehicle,
for complete details. nissan north America, inc. reserves the right to make changes, at anytime, without prior notice, in prices,
colors, materials, equipment, specifications, and models and to discon\
tinue models or equipment. due to continuous product
development and other pre- and post-production factors, actual vehicle, \
materials and specifications may vary. Some vehicles are
shown with optional equipment. See the actual vehicle for complete accur\
acy. Specifications, options and accessories may differ
in Hawaii, u.S. territories and other countries. f or additional information on availability, options or accessories, see your ni SSAn
dealer or contact nissan north America, inc.