lights NISSAN CUBE 2011 3.G Quick Reference Guide

01
5
STarTING/STOPPING TH e eNGIN e
cO nTinu OuSLY VAR iABL e TRA nSM iSS iO n
(ni SSAn intelligent k ey™ models only - if so equipped)

depress the brake pedal.

Move the shift lever to P (PAR k).

Push the ignition switch to start the engine.
n OTe: it is important to make sure the ni SSAn key is
with you (that is, in your pocket or purse).

T uRnin G THe en Gine Off

Move the shift lever to the P (PAR k) position, apply
the parking brake and push the ignition switch.
P u SH B uTTO n eMeRG enc Y en Gine SH uT Off
To shut off the engine in an emergency situation while driving, perform one of the following procedures:

Rapidly push the push button ignition switch 3 consecutive times, or

Push and hold the push button ignition switch for more than 2 seconds.
MAnu AL TRAn SMiSS iO n (if so equipped)

depress the brake pedal.

Move the shift lever to n (neutral).

depress the clutch pedal to the floor.

Turn the ignition switch to start the engine.
T uRnin G THe en Gine Off

Apply the foot brake and place the vehicle in first gear, then apply the parking brake and turn
the ignition switch to O ff.
for more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
H eaDLIGHT CONTr OL SwITCH
Turn the headlight control switch
01 to the
position to turn on the front parking, side marker, tail,
license plate and instrument panel lights.

Turn the switch
01 to the
position to turn on
the headlights.
fOG Li GHT OP eRATi On (if so equipped)
The headlights must be on and the low beams selected for the fog lights to operate.

Turn the switch (inside collar)
02 to the
position to turn on the fog lights.

Turn the switch (inside collar)
02 to the OFF position to turn off the fog lights.
f
or more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
02