NISSAN CUBE 2012 3.G Quick Reference Guide

9
auTOMaTIC CLIMa Te CONTrOLS (if so equipped)
01 auTO B
uTTON

The auto mode may be used year-round. Press the au TO button and the system will
automatically control the inside temperature (automatic cooling and/or \
dehumidified
heating), air flow distribution and fan speed.
02 Te
MPera Ture CONTr OL BuTTONS

Press the temperature control buttons
02 up to increase the temperature or down
to decrease the temperature.
03 F
aN SPee D CONTrOL BuTTONS

Press the fan speed control buttons to manually adjust the fan speed fas\
ter or
slower
.

using the fan speed control buttons will disable the auto mode; to resume auto mode,
press the au TO button

01 .
04 MOD
e BuTTON

Press the MOD e button
to cycle through the following air flow outlets:

Air flows from the center and side vents.

Air flows from the center, side and foot vents.

Air flows mainly from the foot vents.

Air flows from the defroster and foot vents.

05 D
eFr OSTING/D eFOGGING Fr ONT aND SID e wINDOwS

Press the defroster control button
to turn the system on. The a/C automatically turns
on when the defroster mode is selected. This feature removes humidity from the air.

use the temperature control buttons
02 to set the desired temperature.

To set the defroster on high, press the fan speed control button to increase the fan
speed to the maximum setting.
01
05
10
04
0908
07
06
0302
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.10
first drive features
06 D
eFr OSTING rear wINDO w aND OuTSIDe HeaTeD MI rrOr S (if so equipped)

Push the rear window defroster switch
to turn the system on or off.

This function automatically turns off after approximately 15 minutes.
07 a/C B
uTTON

Press the a/C button to manually turn the A/c on or off.
08 OuTSID
e aIr CI rCu LaTION B uTTON

Press the outside air button to draw fresh air into the vehicle; the indicator light on
the button will illuminate.

Press and hold the outside air circulation button for more than 1.5 seconds to set
automatic outside air circulation mode.
09 aI
r re CIrCu LaTION B uTTON

Press the air recirculation button to recirculate air inside the vehicle; the indicator
light on the button will illuminate. This system is used to avoid outside odors and helps to
adjust the inside vehicle temperature more effectively.

The air recirculation mode can only be selected if the air flow mode co\
ntrol is in the
following positions:
,
or .
10 OFF B
uTTON

Press the OFF button to turn the climate control system off.
for more information, refer to the “Instruments and controls (section 2)” and the “Heater, air conditioner, audio and
phone systems (section 4)” of your Owner’s Manual.

To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.11
0506
03
0102
FM/aM/XM®* SaTeLLITe raDIO wITH CD PLa Yer (if so equipped)
01 VOL/ON•OFF CONTROL KNOB

Press the VOL/ON•OFF control knob to turn the system on or off.

Turn the VOL/ON•OFF control knob to the right or left to increase or decrease the volume.
02 Tu
Ne/SCr OLL/auDIO KNOB

To manually tune the radio, turn the Tu Ne/SCr OLL/auDIO knob left or right.
03
S
ee K/C aTe GOr Y BuTTONS

To scan through each broadcasting station, press the S eeK/C aTe GOr Y buttons.

To skip from one track to another on a cd, press the S eeK/C aTe GOr Y buttons.

When the S eeK/C aTe GOr Y buttons are pressed and held while a cd is playing, the cd
will rewind or fast forward. When the button is released, the cd will play at normal speed.
04 ST
aTION S eLe CT B uTTONS
Twelve stations can be set for the f M band, six for the AM band and eighteen for XM®
satellite radio.

To store a station in a preset, you must first select a radio band by pressing the \
FM•AM

button
05 or XM
button
06 , then tune to the desired AM, f M or XM satellite radio station.

Then press and hold the desired station select button (1 -6 ) until a beep is heard and the
sound is briefly muted. The channel indicator will appear on the display and the sound will
resume. Programming is now complete.

To retrieve a previously set station, select the radio band where the preset was stored
then press the corresponding station select button (1 -6 ).
*XM® Satellite Radio is only available on vehicles equipped with optional XM® satellite subscription service.
for more information, refer to the “Heater, air conditioner, audio and phone systems (section 4)” of your Owner’s Manual.
04

CruISe CONTr OL (if so equipped)
The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.

The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.

To activate the cruise control, push the C ruISe
ON/OFF switch

01 . The C
ruISe indicator light
in the instrument panel will illuminate.

To set cruising speed, accelerate the vehicle to the desired speed, push \
the CO aST/SeT switch


02 and release. Take your foot off the accelerator pedal. Your vehicle will maintain the set speed.

To reset at a faster cruising speed, push and hold the a CCeL/reS switch
03 . When the
vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the CO aST/SeT switch
02 . Release

the switch when the vehicle slows to the desired speed.

To cancel the preset speed, push the C aNCeL switch
04 .

To turn off cruise control, push the Cru ISe ON/OFF switch
01 . The C
ruISe indicator
light in the instrument panel will turn off.
for more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
uSB/IPOD® INTer Fa Ce (if so equipped)
The u SB jack
01 is located on the instrument panel
in front of the shift lever.

When a compatible u SB memory device or iPod® is
plugged into the u SB jack

01 , compatible audio
files stored on the device can be played
through the vehicle’s audio system.
for more information, refer to the “Heater, air
conditioner, audio and phone systems (section 4)”
of your Owner’s Manual.
04
03
02
01
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.12
first drive features
01

FueL-FILLer DOOr
To open the fuel-filler door, pull the release
01
located on the driver’s side instrument panel.

The fuel-filler door is located on the right, rear side of
the vehicle.
for more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
01
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.13

BLueTOOTH® HaNDS-Free PHONe SYSTeM (if so equipped)
With an overhead microphone and sound
transmitted through the audio system speakers,
the Bluetooth
® Hands-free Phone System utilizes
Bluetooth wireless technology and voice recognition
to provide hands-free cellular phone communication.

A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTe M OPeRATin G TiPS
close all windows. Surrounding noises may interfere
with system operation and performance.

Press the
button on the steering wheel to activate
voice recognition.

Wait for the tone before speaking.

Begin speaking a command within 5 seconds of the
tone.

Speak in a clear and natural voice without pausing
between words.

Look straight ahead and avoid speaking too loudly or too softly.

To go back to the previous command, say “Go back” or “correction.”

To cancel a voice recognition session, simply wait 5 seconds, say
“cancel” or “Quit,” or press the
button for 5 seconds.
TrIP COMPuTer
With the ignition switch in the ON position, trip
computer
01 modes can be selected by pressing the
trip computer mode switch 02 on the instrument panel.

The following modes can be selected in the display:

Trip A – measures the distance of one specific trip.

Trip B – measures the distance of a second specific trip.

current fuel consumption – displays the current fuel
consumption.

distance to empty (dte) – displays the estimated distance to empty (dte) the vehicle can be
driven before refueling.

Average fuel consumption – displays the average fuel consumption since the last res\
et.
for more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
02
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.14
system guide
*Some jurisdictions prohibit the use of cellular telephones while drivin\
g.

To interrupt the system voice and give a command quickly, press the
button.


When speaking Phonebook names, please be aware some phones require the la\
st name to be
spoken before the first name. f or example, “Michael Smith” may be spoken as “Smith Michael”.

To increase or decrease the volume of the voice prompts, push the volume \
control switches

or
on the steering wheel or turn the VOL/ON•OFF control knob on the audio

system while the system is responding.

if the Voice Recognition system does not recognize your voice commands, train th\
e system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.

Some commands are not available while the vehicle is in motion.

The “Help” command can be used to hear a list of available commands\
at any time.

Please refer to the cellular phone manufacturer’s Owner’s Manual f\
or detailed information
regarding your Bluetooth phone.

for recommended phones and detailed instructions, please visit
www.nissanusa.com/bluetooth.
cOnnec TinG PROcedu Re
n OTe: The vehicle must be stationary when connecting the phone.
1. Press the

button
on the steering wheel. The system announces the available commands.

2. Say: “connect phone”. The system acknowledges the command and announces the next set
of available commands.
3. Say: “Add phone”. The system acknowledges the command and asks you to initiate
connecting from the phone handset.
4. initiate connecting from the phone:

The connecting procedure varies according to each cellular phone model. f or detailed
connecting instructions and compatible phones, please visit
www.nissanusa.com/bluetooth.

When prompted for a Passkey code, enter “1234” from the handset. (The Passkey code is
assigned by ni SSAn and cannot be changed.)
5. Say a name for the phone when the system asks you to provide one. You can give the phone
a name of your choice.
PHOne BOOk SeTu P
depending on your cell phone, the system may automatically download your \
cell phone’s
entire phonebook to the vehicle’s Bluetooth system.

if the phonebook does not download automatically, 40 entries can be individually downloaded.

To manually download entries:
1. Push the

button on the steering wheel.

2. After the tone, say “Phonebook”.
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.15

system guide
3. After the next tone, say “Transfer entry”. The system acknowledges the command and
asks you to initiate the transfer from the phone handset. The new contact phone number
will be transferred from the cellular phone to the vehicle.

The transfer procedure varies according to each cellular phone. See your cellular phone’s
owner’s manual for details. You can also visit www.nissanusa.com/bluetooth for
instructions on transferring phone numbers from ni SSAn recommended cellular phones.
4. The system repeats the number and prompts you for the next command. When you have
finished entering numbers or transferring an entry, choose “Store.”
5. The system confirms the name, location and number.
MAkin G A cALL
1. Press the

button. A tone will sound.
2. Say: “call”. The system acknowledges the command and announces the next set of
available commands.
3. Say: “Phone number”. The system acknowledges the command and announces the next
set of available commands.
4. Say the number you wish to call starting with the area code in single digit format.
5. When you have finished speaking the phone number, the system repeats it back and
announces the available commands.
6. Say: “dial”. The system acknowledges the command and makes the call.
Recei Vin G/endin G A cALL

When you receive a phone call, a ring tone sounds through the audio syste\
m.

To accept the call, press the
button. To reject the call, press the button.

To hang up the phone at the end of a call or to disconnect during call pl\
acement, press
the
button.
for more information, refer to the “Heater, air conditioner, audio and phone systems (section 4)” of your Owner’s Manual.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
16

memo

nissan, the nissan Brand Symbol, Z and
nissan model names are nissan trademarks.
© 2011 nissan north America, inc.
QR
2e 0Z12u0Printing: november 2011 (05)
To view detailed instructional videos,
go to www.nissanownersinfo.mobi/2012/cube
or snap this barcode with an appropriate barcode reader.
This Quick Reference Guide is intended to provide an overview of some of the uniq\
ue features of your new vehicle. See your
Owner’s Manual, which contains important safety warnings and information about the operation and maintenance of yo\
ur vehicle, for
complete details. nissan north America, inc. reserves the right to make changes, at anytime, without prior notice, in prices, colors,
materials, equipment, specifications, and models and to discontinue mo\
dels or equipment. due to continuous product development
and other pre- and post-production factors, actual vehicle, materials an\
d specifications may vary. Some vehicles are shown with
optional equipment. See the actual vehicle for complete accuracy. Specifications, options and accessories may differ in Hawaii, u.S.
territories and other countries. f or additional information on availability, options or accessories, see your ni SSAn dealer or contact
nissan north America, inc.