lights NISSAN CUBE 2012 3.G Quick Reference Guide

NISSaN INTeLLIGeNT K eY® SYSTe M (if so equipped)
The niSSAn intelligent k ey® System allows you to lock or
unlock the vehicle, open the back door and start the engine.
n OTe: it is important to make sure the intelligent k ey is
with you (that is, in your pocket or purse).

The operating range of the intelligent k ey is within
31.5 in (80 cm) from each request switch.

To lock the vehicle, push either door handle request
switch

01 , push the back door request switch
02 ,
or press the

button
03 on the keyfob.

To unlock the vehicle, perform one of the following
procedures:
• Push either door handle request switch

01 once
or the back door request switch
02 once; the
corresponding door will unlock. Push the request
switch again within 1 minute; all other doors
will unlock, or
• Press the

button
04 on the keyfob to unlock
the driver’s side door. Press the
button again;
all other doors will unlock.

The intelligent k ey can also be used to activate the
panic alarm by pressing and holding the

button
05
for more than 1 second. Once activated, the panic

alarm and headlights will stay on for 25 seconds.
inTe LLiGenT keY BATTe RY diSc HARG e

if the battery of the intelligent k ey is discharged, or
environmental conditions interfere with the intelligent
k ey operation, start the engine according to the
following procedure:
1. Move the shift lever to the P (P arK) position.
2. firmly apply the foot brake.
3. Touch the ignition switch with the intelligent k ey
and a chime will sound.
4. Within 10 seconds after the chime sounds, push the ignition switch while depressing the
brake pedal and the engine will start.
for more information, refer to the “Pre-driving checks and adjustments (section 3)” , the “Starting and driving (section 5)”
and the “Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
4
first drive features
01
02
03
04
05
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

HeaDLIGHT CONTr OL SwITCH
H eAd LiGHT c OnTROL

Turn the headlight control switch to the
position


01 to turn on the front parking, side marker, tail, license
plate and instrument panel lights. Turn the switch to the


position
02 to turn on the headlights.
A uTOLi GHT SYSTe M (if so equipped)

The autolight system will automatically turn the headlights on when it is\
dark and off when it is
light. The system will keep the headlights on for a period of time after you tur\
n the ignition off
and all doors are closed.

To activate the autolight system, turn the headlight control switch to the au TO position
03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF,

01 or
position
02 .

H iGH B eAM S eLec T

Push the headlight control switch forward
04 to

select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to select
the low beam. The blue indicator light goes off.

Pull and release the headlight control switch
05 to
flash the headlight high beams on and off.
7
Pu SH Bu TTOn eMeRGenc Y enGine SHuT Off
To shut off the engine in an emergency situation while driving, perform one of the following procedures:

Rapidly push the push button ignition switch 3 consecutive times in less than 1.5 seconds, or

Push and hold the push button ignition switch for more than 2 seconds.
MaN uaL TraNSMISSION (if so equipped)

depress the brake pedal.

Move the shift lever to N (Neutral).

depress the clutch pedal to the floor.

Turn the ignition switch to start the engine.
T uRnin G THe enGine Off

Apply the foot brake and place the vehicle in first gear, then apply the parking brake and turn
the ignition switch to OFF.
for more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
03
01
02
04
05

first drive features
8
wINDSHIeLD w IPer/ waSHer Sw ITCH
Move the lever to the following positions to operate
the windshield wipers:

01 Mist (MIST) - One sweep operation of the
front wipers.

02 intermittent (INT) - front wipers operate
intermittently. The intermittent operation speed
can be adjusted by twisting the time control
ring
03 .

04 Low (LO) - front wipers operate at a continuous
low-speed.

05 High (HI) - front wipers operate at a continuous
high-speed.

06 Pull the lever toward you to activate the front
washer. The front wipers will operate several
times.
Re AR W indSHieL d W iPeR A nd WASHeR

07 intermittent (INT) - Rear wiper operates
intermittently.

08 Low (ON) - Rear wiper operates at a continuous
low-speed.

09 Push the lever forward to activate the rear washer.
The rear wiper will operate several times.
for more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
02
04
05
MIST
OFF
INT
INT
LO
ON
HI
06
09
07
08
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
fOG LiGHT SW iTc H (if so equipped)
n OTe: The headlights must be on and the low beams
selected for the fog lights to operate.

Turn the switch (inside collar) to the position
06
to turn the fog lights on.

Turn the switch (inside collar)
to the OFF position to
turn the fog lights off.
for more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
06
03