manual transmission NISSAN CUBE 2014 3.G Quick Reference Guide

7
OUTSIDE MIRROR CONTROL SWITCH
The outside mirror control switch is located on the
left side of the instrument panel.
To select the left or right mirror, move the switch 01
to the left or right
Adjust eac h mirror to the desired position using
the control switch
02.
To prevent accidentally moving the mirror, move switch

01 to the center (neutral) position.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
FOLDING DOWN THE REAR BENcH SEAT
To fold the seats flat, secure the seat belts on



the seat belt hooks on the side wall. Release the




connector tongue of the rear center seat belt from




the buc
kle then store the connector and seat belt



tongues on the seat belt hook.
Before folding down the seatbac k, tuck the seat belt



buc
kles into the seat cushion pockets.
Fold the seatback down by pulling the adjusting strap 01.
To raise the seatback, lift up the seatback and push it to the upright position until it is latched.
After raising the seatback, pull the seat belt buckles out of the seat cushion pockets until they



are fully extended before using the seat belts.
For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (se\
ction 1)” of your
Owner’s Manual.
01
02
01
STARTING/STOPPING THE ENGINE
cONTINUOUSLY VARIABLE TRANSMISSION
(N ISSAN Intelligent k
ey® models only - if so equipped)
It is import ant to make sure the Intelligent key is
with you (that is, in your poc ket or purse).
Depress the brake pedal.
Move the shift lever to the P (PARK) position.
Push the ignition switch to start the engine.

TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position, apply
the parking brake and push the ignition switch.
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
1523989_14_Cube_QRG_091613.indd 79/16/13 3:31 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.

8
HEADLIGHT CONTROL SWITCH
HEADLIGHT cONTROL
Turn the headlight control switch to the
position
01 to turn on the front parking, side marker, tail, license

plate and instrument panel lights. Turn the switch to the
position
02 to turn on the headlights.
AUTOLIGHT SYSTEM (if so equipped)
The autolight system will automatically turn the headlights on when it is\
dark and off when it is
light. The system will keep the headlights on for a period of time after you tur\
n the ignition off
and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position
03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF position,
position
01 or
position
02.
HIGH BEAM SELE
cT
Push the headlight control switc h forward
04 to

select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to select
the low beam
. The blue indicator light
will extinguish.
Pull and release the headlight control switc h
05 to

flash the headlight high beams on and off.
MANUAL TRANSMISSION (if so equipped)
Depress the brake pedal.
Move the shift lever to the N (Neutral) position.
Depress the clutch pedal to the floor.
Turn the ignition switch to start the engine.
TURNING THE ENGINE OFF
Apply the foot brake and place the shift lever in first
gear, then apply the parking brake and turn the ignition switch to OFF.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
03
01
02
04
05
first drive features
1523989_14_Cube_QRG_091613.indd 89/16/13 3:31 PM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.