wheel NISSAN GT-R 1998 Workshop Manual

STEERING
STEERING GEAR STEERING WHEEL
Steering wheel end play rnm -- -
Steering wheel free play rnm1 0-35 0
Steering gear type
Rack neutral position "L" mm
Amount of steering gear housing movement mm
I Within 22 PR29, PR26AD, PR26AF
68.5
STEERING
ANGLE
STEERING COLUMN
Inner wheel
Outer wheel 42"
33"
STC0101
D 88
Primary tightening torque 5.0 - 5.8 8T
Steering column length "L" mm
Retainer
adjustment
61
0
Re-tightening torque after loosening
once 5.0
- 5.8 Rs N.m (kg-m) (0.5 - 0.6)
MA
Range
within ill .5 mm from
STEERING LINKAGE Less than 98.0 EL (1 0.0)
(30.0)
Full range
Rack
sliding
force
Steering gear type
Oscillating torque 0.30
- 2.94
Nm
(kg-m)
(0.03 - 0.30) variations Less
than 147
Spring scale measurement
(at stud bolt hole) 6.48
- 64.6
N
(kg)
(0.66 - 6.59)
Tie-rod
ball joint
outer socket OIL PUMP Sliding torque 0.30 - 2.94
End play
Oscillating torque
1 .O - 7.8
Maximum oil pump pressure
MPa (kg/cm2) 8.822: (90)
(Without HICAS)
7.842:; (80)
(With HICAS)
STEERING FLUID Tie-rod ball joint
inner socket Spring
scale measurement (at
arrow position in figure below) 19.0 - 152
N (kg) (1.90 - 15.5)
Fluid capacity P I Approx. 1.0
End play mm Less than 0.2
mm 173.3
TIGHTENING TORQUE Tie-rod length "L"
Unit: N.m (kq-m)
Steering wheel nut
Steering gear to suspension member
Hydraulic tube (high pressure side) to oil
/ 50 - 68 (5.0 - 7.0)
Pump
30
- 39
(3.0 - 4.0)
89
- 91 (9.0 - 9.3)
24
- 29 (2.4 - 3.0)
30
- 39 (3.0 - 4.0)
79
- 98 (8.0 - 10.0)
32 - 42 (3.2 - 4.3)
14
- 17 (1.4 - 1.8)
Steering gear
to steering column
Outer socket to steering knuckle
Tie-rod lock nut
Oil pump fixing bolt
Hydraulic tube to
steering gear Large
Small
High pressure side
Low pressure side 15
- 24 (1.5 - 2.5)
28
- 39 (2.8 - 4.0)