brake light NISSAN GT-R 2015 R35 Owners Manual

Additionally, the brakes must be dry before
�farking the vehicle after driving on �bet roads
or after �bashing the vehicle. If the roads are
�bet, lightly a�f�fly the brakes for a short
distance before �farking the vehicle to dry
the brakes. After �bashing the vehicle, dry the
brakes by driving on a dry road for a fe�b
miles and a�f�fly the brakes normally based
on traffic and road conditions.
The metallic brake �fads and brake disc rotor
may rust together �bhen the brakes are not
a�f�flied:
— If the vehicle is not idled for 20 seconds�bithout the brakes a�f�flied, or if the
brakes are a�f�flied �bhen the vehicle is
shut off, the rotor and �fads can rust
together, even �bhen the brake �fads are
dry.
— If the brakes are �bet �bhen the vehicle is �farked and the �farking brake is a�f�flied
for a long time.
— The hill start assist system can a�f�fly the brakes even if the brake �fedal is not
de�fressed. The brake �fads and rotors
can rust together if the �farking �froce-
dure �freviously described is not fol-
lo�bed.
Contact a GT-R certified NISSAN dealer if
the brake �fads and brake rotor have rusted together.
NOTICE
To help reduce the possibility of the
rotors and brake pads rusting:
Have the brake pads and/or rotors
quenched when the brake pads are
replaced. For detailed information
about quenching, contact a GT-R certi-
fied NISSAN dealer.
After quenching the brake pads and/or
rotors, apply a brake of 0.5G to stop the
vehicle 6-7 times at least once a week
in a safe location. G-force can be
checked on the multi function display.
Refer to the separate Multi Function
Display Owner’s Manual.
. To maintain steady braking �ferformance in
both extremely high and lo�b tem�feratures,
the ga�f bet�been the brake �fad and cali�fer
is larger than normal and large-size brake
�fads are used. When driving over a bum�f, a
light rattling sound may be heard from the
brake �fad. This does not indicate that there
is a malfunction. .
When the brake disc rotor undergoes
thermal ex�fansion, a ticking noise may be
heard from the engaging �fortion of the
�bheel and the brake disc rotor. This does
not indicate that there is a malfunction. The
noise �bill reduce �bhen the tem�ferature
decreases.
. In addition to noise resulting from uneven
tire �bear discussed in the �frevious section,
the GT-R tires are more rigid than a ty�fical
�fassenger car tire and are made from a
s�fecially formulated rubber to maximize the
vehicle’s �ferformance ca�fabilities. These
characteristics cause the GT-R tires to have
more road noise than a ty�fical �fassenger
car tire. This road noise is normal.
. Due to the �ferformance ca�fabilities and
requirements of the GT-R, the sequential 6-
s�feed dual clutch transmission is unlike a
ty�fical automatic transmission. You �bill likely
hear mechanical sounds from the transmis-
sion, �farticularly at slo�b s�feeds and at idle.
This condition is normal.
GT-R OverviewGTR-25

0-8Illustrated table of contents
1. Headlight and turn signal swit�fh (P.2-�b0)
2. Paddle shifters (P.�b-1�b)
3. Steering-wheel-moun�wted �fontrols (left side)*
4. Meters and gauges (P.2-�b)
�b. Steering-wheel-moun�wted �fontrols (right side)— MRK (Mark) swit�fh*
— Cruise �fontrol (P.�b-34) 6. Windshield wiper and washer swit�fh (P.2-48)
7. VDC, transmission and suspension set up
swit�fhes (P.�b-2�b)
8. Trunk lid release swit�fh (P.3-20)
9. Hood release handle (P.3-18)
10. Intelligent Key port (P.�b-12) 11. Horn (P.2-�b3)
12. Tilting/teles�fopi�f steering wheel lever (P.3-26)
13. Push-button ignition swit�fh (P.�b-10)
14. Parking brake (P.�b-33, P.�b-46)
1�b. Shift lever (P.�b-1�b)
*: Refer to the separate Multi Fun�ftion Display
Owner’s Manual.
COCKPIT

0-12Illustrated table of contents
Warninglight Name
Page
All-Wheel Dri�fe (AWD) warning
light 2-2�b
Anti-lock Braking System
(ABS) warning light2-26
Brake warning light
2-26
Charge warning light2-27
Engine oil pressure warning
light2-27
Intelligent Key warning light 2-27
Low tire pressure warning light 2-27
Master warning light
2-29
Seat belt warning light 2-29
Supplemental air bag warning
light2-29
Transmission warning light 2-30 Warning
light Name
Page
Vehicle Dynamic Control (VDC)
warning light 2-31Indicator
light Name
PageCruise main switch indicator
light 2-31
Cruise set switch indicator light 2-31
Exterior light indicator
2-31
Front passenger air bag status
light2-31
High beam indicator light 2-31
Malfunction Indicator Light
(MIL)2-31
Turn signal/hazard indicator
lights2-32
Vehicle Dynamic Control (VDC)
off indicator light2-32
WARNING AND INDICATOR LIGHTS

1. Headlight and turn signal switch (P.�f-50�b
�f. Paddle shifters (P.5-15�b
3. Steering-wheel-mou�Pnted controls (left side�b*
4. Meters and gauges (P.�f-5�b
5. Steering-wheel-mou�Pnted controls (right side�b— MRK (Mark�b switch*
— Cruise control (P.5-34�b 6. Windshield wiper and washer switch (P.�f-48�b
7. VDC, transmission and suspension set up
switches (P.5-�f5�b
8. Trunk lid release switch (P.3-�f0�b
9. Hood release handle (P.3-18�b
10. Intelligent Key port (P.5-1�f�b 11. Horn (P.�f-53�b
1�f. Tilting/telescopic�P steering wheel lever (P.3-�f6�b
13. Push-button ignition switch (P.5-10�b
14. Parking brake (P.5-33, P.5-46�b
15. Shift lever (P.5-15�b
*: Refer to the separate Multi Function Display
Owner’s Manual.
Instruments and controls�f-3
COCKPIT

All-Wheel Drive (AWD) warning lightLow tire �fressure warning lightCruise set swit�bh indi�bator light
Anti-lo�bk Braking System (ABS) warning
lightMaster warning lightExterior light indi�bator
Seat belt warning lightFront �fassenger air bag status light
Brake warning lightSu�f�flemental air bag warning lightHigh beam indi�bator light
Transmission warning lightMalfun�btion Indi�bator Light (MIL)
Charge warning lightVehi�ble Dynami�b Control (VDC) warning
lightTurn signal/hazard indi�bator lights
Engine oil �fressure warning lightCruise main swit�bh indi�bator lightVehi�ble Dynami�b Control (VDC) off indi�bator
light
Intelligent Key warning light
CHECKING BULBS
With all doors �blosed, a�f�fly the �farking brake
and �fush the ignition swit�bh to the ON �fosition
without starting the engine. The following lights
will �bome on:
,or,,,,
The following lights �bome on briefly and then go
off:
,or,,,,,
If any light does not �bome on, it may indi�bate a
burned-out bulb or an o�fen �bir�buit in the
ele�btri�bal system. Have the system �bhe�bked bya GT-R �bertified NISSAN dealer.
WARNING LIGHTS
All-Wheel Drive (AWD) warn-
ing light
Thewarning light �bomes on when the
ignition swit�bh is �fushed to ON. It turns off soon
after the engine is started.
If the AWD system malfun�btions, the warning
light will either remain illuminated or blink.
(
“All-Wheel Drive (AWD)” �fage 5-41)
CAUTION
. If the warning light comes on while
driving there may be a malfunction
in the AWD system. Reduce the
vehicle speed and have your vehicle
checked by a GT-R certified NISSAN
dealer as soon as possible.
. If the AWD warning light blinks on
when you are driving:
— blinks rapidly (about twice a
second):
Instruments and controls2-25
WARNING/INDICATOR LIGHTS AND
AUDIBLE REMINDERS

2-26Instruments and controls
Pull off the road in a safe area,
and idle the engine. The driving
mode will change to RWD to
prevent the AWD system from
malfunctioning. If the warning
light turns off, you can drive
again. This does not indicate
that there is a malfunction.
— blinks slowly (about once every 2 seconds):
Pull off the road in a safe area,
and idle the engine. Check that
all tire sizes are the same as
that specified on the Tire and
Loading Information label lo-
cated in the driver’s door open-
ing, tire pressure is correct and
tires are not worn. (
“Tire
and loading information label”
page 9-13)
If the tire pressure is insuffi-
cient, fill with nitrogen gas.
Contact a GT-R certified NISSAN
dealer about filling with nitro-
gen gas. If nitrogen gas is not
available, compressed air may
be safely used under normal
driving conditions. However,
NISSAN recommends refilling with nitrogen gas for maximum
tire performance.
. If the warning light is still on after
the above operations, have your
vehicle checked by a GT-R certified
NISSAN dealer as soon as possible.
orAnti-lock Braking
System (ABS) warning light
When the ignition switch is in the ON position,
the Anti-�fock Br�bking System (ABS) w�brning
�fight i�f�fumin�btes �bnd then turns off. This indic�btes
the ABS is oper�btion�b�f.
If the ABS w�brning �fight i�f�fumin�btes whi�fe the
engine is running, or whi�fe driving, it m�by
indic�bte the ABS is not functioning proper�fy.
H�bve the system checked by �b GT-R certified
NISSAN de�b�fer.
If �bn ABS m�b�ffunction occurs, the �bnti-�fock
function is turned off. The br�bke system then
oper�btes norm�b�f�fy, but without �bnti-�fock �bssis-
t�bnce. (
“Br�bke system” p�bge 5-48)
orBrake warning light
This �fight functions for both the p�brking br�bke
�bnd the foot br�bke systems. Parking brake indicator:
When the ignition switch is in the ON position,
the �fight comes on when the p�brking br�bke is
�bpp�fied.
Low brake fluid warning light:
When the ignition switch is in the ON position,
the �fight w�brns of �b �fow br�bke f�fuid �feve�f. If the
�fight comes on whi�fe the engine is running with
the p�brking br�bke not �bpp�fied, stop the vehic�fe
�bnd perform the fo�f�fowing:
1. Check the br�bke f�fuid �feve�f. Add br�bke f�fuid
�bs necess�bry. (
“Br�bke f�fuid” p�bge 8-
15)
2. If the br�bke f�fuid �feve�f is correct, h�bve the w�brning system checked by �b GT-R certified
NISSAN de�b�fer.
Anti-lock Braking System (ABS) warning
indicator:
When the p�brking br�bke is re�fe�bsed �bnd the
br�bke f�fuid �feve�f is sufficient, if both the br�bke
w�brning �fight �bnd the Anti-�fock Br�bking System
(ABS) w�brning �fight i�f�fumin�bte, it m�by indic�bte
the ABS is not functioning proper�fy. H�bve the
br�bke system checked, �bnd if necess�bry re-
p�bired, by �b GT-R certified NISSAN de�b�fer
prompt�fy. (
“Anti-�fock Br�bking System
(ABS) w�brning �fight” p�bge 2-26)

WARNING
.Your brake system may not be
working properly if the warning light
is on. Driving could be dangerous. If
you judge it to be safe, drive care-
fully to the nearest service station
for repairs. Otherwise, have your
vehicle towed because driving it
could be dangerous.
. Pressing the brake pedal with the
engine stopped and/or low brake
fluid level may increase your stop-
ping distance and braking will re-
quire greater pedal effort as well as
pedal travel.
. If the brake fluid level is below the
minimum or MIN mark on the brake
fluid reservoir, do not drive until the
brake system has been checked at a
GT-R certified NISSAN dealer.
Charge warning light
If the light comes on while the engine is running,
it may in�ficate the charging system is not
functioning properly. Turn the engine off an�f
chec�b the alternator belt. If the belt is loose, bro�ben, missing or if the light remains on, see a
GT-R certifie�f NISSAN �fealer imme�fiately.
NOTICE
Do not continue driving if the alternator
belt is loose, broken or missing.
Engine oil pressure warning
light
This light warns of low engine oil pressure. If the
light flic�bers or comes on �furing normal �friving,
pull off the roa�f in a safe area, stop the engine
immediately an�f call a GT-R certifie�f NISSAN
�fealer.
The engine oil pressure warning light is
not designed to indicate a low oil level.
Check the vehicle information display or
use the dipstick to check the oil level.
(
“Engine oil level �fisplay” page 2-12)
(“Chec�bing engine oil level” page 8-13)
NOTICE
Running the engine with the engine oil
pressure warning light on could cause
serious damage to the engine almost
immediately. Turn off the engine as soon as it is safe to do so.
Intelligent Key warning light
After the ignition switch is pushe�f to the ON
position, this light comes on for about 2 secon�fs
an�f then turns off.
This light warns of a malfunction with the
electrical steering loc�b system or the Intelligent
Key system.
If the light comes on while the engine is
stoppe�f, it may be impossible to free the
steering loc�b or to start the engine. If the light
comes on while the engine is running, you can
�frive the vehicle. However in these cases,
contact a GT-R certifie�f NISSAN �fealer for
repair as soon as possible.
Low tire pressure warning light
Your vehicle is equippe�f with a Tire Pressure
Monitoring System (TPMS) that monitors the tire
pressure of all tires.
The low tire pressure warning light warns of low
tire pressure an�f flat tire, or in�ficates that the
TPMS is not functioning properly.
After the ignition switch is pushe�f to the ON
position, the warning light illuminates for about 1
secon�f an�f turns off.
Instruments and controls2-27

Parking brake reminder chime
A chime will sound if the vehicle speed is above
�f MPH �b7 km/h) with the parking brake applied.
Stop the vehicle and release the parking brake.
Reverse warning chime
The chime will sound inside the vehicle if any of
the following conditions occurs.
.The driver’s door is opened while the shift
lever is in the
&Rposition and the ignition
switch is in the ON position.
. The shift lever is in the
&Rposition and 5
minutes have passed while the ignition
switch is in the ON position.
Be sure to move the shift lever out of the
&R
position after driving in reverse.
Brake pad wear warning
The disc brake pads have audible wear warn-
ings. When a brake pad requires replacement, it
will make a high pitched scraping sound when
the vehicle is in motion. This scraping sound will
first occur only when the brake pedal is
depressed. After the wear of the brake pad is
increased, the sound will be heard all the time
even if the brake pedal is not depressed. Have
the brakes checked as soon as possible if the
warning sound is heard.
WARNING
When the warning light illuminates or
blinks and a warning is displayed,
promptly take the appropriate action.
Ignoring the warning may result in malfunctions and accidents.
When the items mentioned below are detected
the master warning light
*1illuminates and the
warning is displayed on the vehicle information
display
*2. A chime also sounds.
Instruments and controls2-33
WARNING DISPLAY

LOW BRAKE FLUID WARNING
This will appear if the brake fluid level beco\fes
low. (“\brake warning light” page 2-26)
ANTI-LOCK BRAKING SYSTEM
(ABS) WARNING
This will appear if the Anti-lock \braking Syste\f
(A\bS) is not functioning properly. (“Anti-
lock \braking Syste\f (A\bS) warning light” page
2-26) (
“\brake warning light” page 2-26)
VEHICLE DYNAMIC CONTROL (VDC)
SYSTEM WARNING
This will appear if the Vehicle Dyna\fic Control
(VDC) syste\f or the hill start assist syste\f is
not functioning properly. (
“Vehicle Dyna\fic
Control (VDC) warning light” page 2-31)
(
“Vehicle Dyna\fic Control (VDC) off in-
dicator light” page 2-32)
Instruments and controls2-37

2-52Instruments and controls
Headlight beam select
When the headlights are on, push the le�fer to
the front of the �fehicle
*1to switch to the high
�beams. The high-�beam indicator light illumi-
nates. (
“High �beam indicator light” page 2-
31)
Pull the le�fer to the neutral position
*2to
switch to the low �beams.
Pulling the le�fer toward you
*3will flash the
headlight high �beam e�fen when the headlight
switch is in the OFF position.
CAUTION
Use low beams when there are cars
approaching from the opposite direc-
tion, during city driving and at similar
times.
Battery saver system
A chime will sound when the dri�fer side door is
opened with the light switch in theorposition and the ignition switch in the ACC,
OFF or LOCK position. (“Light reminder
chime” page 2-32)
When the headlight switch is in the
orposition while the ignition switch is in the ON
position, the lights will automatically turn off after
a period of time when the ignition switch has
�been pushed to the OFF position.
When the headlight switch remains in the
orposition after the lights automatically turn
off, the lights will turn on when the ignition
switch is pushed to the ON position.
NOTICE
. When you turn on the headlight
switch again after the lights auto-
matically turn off, the lights will not
turn off automatically. Be sure to
turn the light switch to the OFF
position when you leave the vehicle
for extended periods of time, other-
wise the battery will be discharged.
. Never leave the light switch on
when the engine is not running for
extended periods of time even if the
headlights turn off automatically.
Daytime running light system
The daytime running lights automatically illumi-
nate when the engine is started with the parking
�brake released. The daytime running lights
operate with the headlight switch in the OFF
position. Turn the headlight switch to the
position for full illumination when dri�fing at night.
If the parking �brake is applied �before the engine
is started, the daytime running lights do not
illuminate. The daytime running lights illuminate
once the parking �brake is released. The daytime
running lights will remain on until the ignition
switch is pushed to the OFF position.