clock setting NISSAN LEAF 2013 1.G Quick Reference Guide

8To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.
INSTruMeNT Pa NeL CL OCK
To adjust the instrument panel clock
01 , use
the Settings menu in the dot matrix liquid crystal
display
02 .

The Settings menu is accessed by pressing
the
button
03 on the left side of the
instrument panel
.

Press the button
04 to cycle through the
various Settings modes .

This clock is linked to GPS (if so equipped) through the center display clock .

•


W
ithout any adjustments the correct time will be
displayed based on the vehicle’s current location.



•

T
here are also controls in the center display to
compensate for daylight savings time
.
For more information, refer to the “Instruments and Controls (section
2)” of your Owner’s Manual .
0403
02
01
When the low tire pressure warning light flashes for approximately 1 minute and then remains
on, the TPMS is not functioning properly. Have the system checked by a NISSAN certified
LEAF dealer
.

Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and the



o
utside temperature . Low outside temperature can lower the temperature of the air inside the\




tire, whic
h can cause a lower tire inflation pressure . This may cause the low tire pressure



warning light to illuminate
. If the warning light illuminates, check the tire pressure in your tires
.
For more information, refer to the “Instruments and controls (section 2)” and the “Starting and driving (section 5)” of your
Owner’s Manual .
essential information
1275820_13_Leaf_QRG_Text-Insert_121912.indd 812/19/12 10:10 AM

TrIP COMPu T er
The Trip Computer
01 is located in the dot matrix
liquid cryst
al display .
With the power switch in the ON position, trip



computer modes can be selected by pressing the
button
02 on the left side of the instrument panel .
The following modes can be selected in the display:




•

T
o 100% Charge – Displays the estimated time



to a full Li-ion c
harge by using either 120 volt or



24
0 volt .




•
e
nergy e conomy – Displays the average and



inst
ant energy economy
.



•
a
verage Speed

– Displays the average vehicle



speed since the last reset
.




•

Driving Distance and
e lapsed Time – Displays



the tot
al distance the vehicle has been driven and



the time since the last reset
.

•


S
OC% – Displays the vehicle’s current state of charge .




•

Settings
– Allows you to adjust the system settings for features such as the clock, reminders



or preferences for alerts, maintenance intervals and language displays
.




· Press the button
03 to cycle through the various setting modes .



· Press the button
02 to choose the selected mode .



•

w
arning

– If there are any
.
To reset Driving Distance and Elapsed Time, go to that mode on the trip computer and hold the
button 03 for longer than 1 second .
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual .
0302
01
system guide
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.19
1275820_13_Leaf_QRG_Text-Insert_121912.indd 1912/19/12 10:11 AM