navigation NISSAN LEAF 2015 1.G Navigation Manual


> (GLW    0RGHO 1DYL(9 @
INFO:
Refer to the NISSAN Owner's Portal Website
for details on destination setting using Google
maps.
USING ROUTE PLANNERGUID-09B35477-5712-4156-81CA-B572957D2AA1It is possible to set the route according to the
route plan created in advance by the NISSAN
Owner's Portal Website.
1. Push the MENUbutton and touch [Destina-
tion].
2. Touch [Next Page].
3. Touch [Route Planner].
LNE0926M
4. Select the preferred route plan from the list.
INFO:
Select [Download] to update the list in-
formation.
5. Touch [Start] after confirming the location of the displayed.
INFO:
Refer to the NISSAN Owner's Portal Website
for details on the route planner.
SETTING FROM STORED ROUTESGUID-174315DE-CFE8-4311-94E7-67FE9F3D0C92It is possible to select a preferred route from the
stored routes.
1. Push the MENUbutton and touch [Destina-
tion].
2. Touch [Next Page].
3. Touch [Stored Routes]. A list screen is
displayed.
LNE0076X
4. Touch the preferred route from the list. The
route to the destination is set.
LNE0077X
5. The entire route is shown on the map. Touch[Start] after confirming the displayed route.
The system starts route guidance to the
selected destination.
INFO:
. Before starting route guidance, the route
condition can be changed and the route can
be stored in the Address Book, etc.
ªProcedures after setting routeº
(page 3-39)
. The stored route only includes locations
(destination and waypoints) and route cal-
culation conditions, not the route itself.
Therefore, when the destination is set using
a stored route, a different route may be
suggested if the current vehicle location is
different from the one when the route was
Navigation3-31
&RQGLWLRQ 1$0


> (GLW    0RGHO 1DYL(9 @
3-32Navigation
stored.
SETTING BY PHONE NUMBERGUID-87C28043-E7CD-4FB6-9E27-0811FF88248EIf the phone number of a facility is known, it is
possible to search for a facility by entering the
phone number, and have the system calculate a
route.
INFO:
. If the area code of the specified telephone
number does not exist in the map data, the
system cannot search for the location.
. Only the locations included in the database
in the map data can be searched by the
phone number. Residential phone numbers
cannot be used to search for a location.
1. Push the MENUbutton and touch [Destina-
tion].
2. Touch [Next Page].
3. Touch [Phone Number]. The telephone
number input screen is displayed.
LNE0078X
4. Enter the telephone number including the
area code. After finishing the entry, touch
[List].
ªPhone number input screenº
(page 1-8)
INFO:
A list screen is displayed if there are two or
more search results. Touch the preferred
destination from the list.
A confirmation screen for the place name
and the location is displayed, and the system
starts calculating.
LNE0079X
5. The selected destination is displayed at the center of the map. Touch [Start] after
confirming the location of the displayed
destination. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
After setting a destination, the location of the
destination can be adjusted and the location can
be stored in the Address Book, etc.
ªOperations after setting destinationº
(page 3-36)
SETTING INTERSECTIONGUID-4599645B-7FEB-4FFC-9904-951F14B57AFCIt is possible to set an intersection of any two
streets as the destination and have the system
calculate a route.
1. Push the MENUbutton and touch [Destina-
tion].
&RQGLWLRQ 1$0


> (GLW    0RGHO 1DYL(9 @
2. Touch [Next Page].
3. Touch [Intersection].
LNE0085X
4. Touch [1st Street]. A character input screenis displayed.
INFO:
Touch [Region] or [City] to narrow down the
specified region and city.
LNE0086X
5. Enter the name of the 1st street. After finishing the entry, touch [List]. A list screen
is displayed.
LNE0087X
6. Touch a street as the 1st street from the list.
LNE0088X
7.Touch [2nd Street.]. A character input
screen is displayed.
LNE0089X
8. Enter the name of the 2nd street. After
finishing the entry, touch [List]. A list screen
is displayed.
LNE0090X
9. Touch a street as the 2nd street from the list.
LNE0091X
10. Touch [OK].
Navigation3-33
&RQGLWLRQ 1$0


> (GLW    0RGHO 1DYL(9 @
3-34Navigation
LNE0092X
11. The select destination is displayed at thecenter of the map. Touch [Start] after
confirming the location of the displayed
destination. The system sets the selected
location as the destination and starts calcu-
lating a route.
INFO:
After setting a destination, the location of the
destination can be adjusted and the location can
be stored in the Address Book, etc.
ªOperations after setting destinationº
(page 3-36)
SETTING CITY CENTERGUID-1CBCD129-BFBE-47D9-9EF0-BE9DCF8E2B24It is possible to set the center of a city as a
destination and have the system calculate a
route.
1. Push the MENUbutton and touch [Destina-
tion]. 2. Touch [Next Page].
3.
Touch [City Center]. A character input
screen is displayed.
LNE0093X
4. Enter the name of the city, touch [List]. A list
screen is displayed.
INFO:
Touch [Last 5 Cities] to display the last 5
cities recently set as destinations.
LNE0094X
5. Touch the preferred destination from the list.
INFO:
Select [By Distance] to sort the list by the
nearest distance.
LNE0095X
6. The selected destination is displayed at the center of the map. Touch [Start] after
confirming the location of the displayed
destination. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
After setting a destination, the location of the
destination can be adjusted, the location
can be stored in the Address Book, etc.
ªOperations after setting destinationº
(page 3-36)
&RQGLWLRQ 1$0


> (GLW    0RGHO 1DYL(9 @
SETTING FREEWAY ENTRANCE/
EXIT
GUID-4515EF2C-9776-443B-97E6-E670C645B162It is possible to set the destination to an
entrance or exit of a freeway and have the
system calculate a route.
1. Push theMENUbutton and touch [Destina-
tion].
2. Touch [Next Page].
3. Touch [Freeway Entrance/Exit]. A character input screen is displayed.
LNE0080X
4. Enter the name of the freeway. After finishingthe entry, touch [List].
LNE0081X
5. Touch the freeway of the destination fromthe list.
LNE0082X
6. Touch [Entrance] or [Exit]. A list screen isdisplayed.
LNE0083X
7. Select the preferred destination from the list.The position of the selected location is
displayed in the preview on the right side
of the screen.
INFO:
Select [By Distance] to sort the list by the
nearest distance.
LNE0084X
8. The selected destination is displayed at the center of the map. Touch [Start] after
confirming the location of the displayed
Navigation3-35
&RQGLWLRQ 1$0


> (GLW    0RGHO 1DYL(9 @
3-36Navigation
destination. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
After setting a destination, the location of the
destination can be adjusted and the location can
be stored in the Address Book, etc.
ªOperations after setting destinationº
(page 3-36)
SETTING POINT ON MAPGUID-1CECA297-8DF7-4E58-9746-C408EB3A9FBDIt is possible to set a location scrolled to on the
map as the destination and have the system
calculate a route.
LNE0096X
1. Scroll the map, place the cross pointer over the preferred location, and touch [Map
Menu].
INFO:
.The map scale should be adjusted tosearch for a location more effectively.
.The point on the blinking road where thecenter of the cross pointer is located can
be set as a destination.
LNE0097X
2. Touch [New Dest.].
LNE0098X
3. The entire route is shown on the map. Touch [Start] after confirming the displayed route.
The system starts route guidance to the
selected destination.
INFO:
LNE0099X
.If a point on a freeway is set as the
destination, a confirmation message is dis-
played.
. Before starting route guidance, the route
condition can be changed and the route can
be stored in the Address Book, etc.
ªProcedures after setting routeº
(page 3-39)
OPERATIONS AFTER SETTING
DESTINATION
GUID-0BFBBD22-47CC-4CEB-8876-3CE84AFA02AAThe following operations are available after you
set a destination.
&RQGLWLRQ 1$0


> (GLW    0RGHO 1DYL(9 @
LNE0100X
Available items after setting destination
.[Start]:
Starts route guidance to the selected
destination.
ªStarting route guidanceº (page 3-37)
. [Route Details]:
Allows you to change the route search
conditions or to check the route information.
ªProcedures after setting routeº
(page 3-39)
. [Move Location]:
Displays a map screen. The location of the
destination can be adjusted.
ªMoving location of destinationº
(page 3-37)
. [Add to Route]:
Edits the route by adding a waypoint or a
destination.
ªAdding additional destinations to a
routeº (page 3-37) .
[Store Location]:
Stores the location in the Address Book.
ªStoring locationº (page 3-38)
. [Details]:
Displays information about the facility that
has been set as the destination, if it is
included in the map data.
ªViewing information about searched
locationº (page 3-38)
Starting route guidanceGUID-D297E553-8059-4E30-B335-74138C3A09D9
LNE0101X
1. Touch [Start]. Route guidance starts. If the
route is already set, the location becomes
the new destination, and the route is
recalculated.
Moving location of destinationGUID-C2CECEB6-9A5F-45F2-B506-35ACD13501D4The location of the destination can be adjusted
by moving the cross pointer across the map.
LNE0108X
1. Touch [Move Location]. A map screen withthe destination located on the map center is
displayed.
2. Adjust the location by moving the cross pointer across the map and touch [OK]. The
location of the destination is modified.
INFO:
. The screen for adjusting the location also
changes when the map screen displayed on
the right side of the screen is touched.
. The map scale can be changed by touching
[ZOOM OUT] or [ZOOM IN].
Adding additional destinations to a
route
GUID-58148779-7ACA-421A-808E-CA2DBAA47C2BEven after the route is already set, you can add a
searched location as a new destination or
waypoint to that route.
If the route has not been set, [Add to Route]
Navigation3-37
&RQGLWLRQ 1$0


> (GLW    0RGHO 1DYL(9 @
3-38Navigation
cannot be selected.
LNE0109X
1. Touch [Add to Route].
2. Touch [Add Destination] or [Add Waypoint].The system starts calculating a route that
includes the added destination or waypoint.
When the calculation is finished, the route is
displayed.
Storing locationGUID-BC2D5B61-3800-40DA-8E7D-15B144C39062A searched location can be stored in the
Address Book. Then it can be easily retrieved
and set as a destination (or waypoint) .
LNE0110X
1.Touch [Store Location]. A message is
displayed, the location is stored in the
Address Book. The corresponding icon is
displayed at the set location on the map.
Viewing information about searched
location
GUID-AC162096-1CF4-4FB0-874A-A7FEE3CD1848Information (street address and phone number)
about points of interest stored in the map data
can be displayed.
LNE0111X
1. Touch [Details]. Information about the loca-
tion is displayed.
2. Touch the item you would like to set.
Available settings
.[Show Map]:Returns to the previous screen.
.[Call]:Makes a call to the selected charging
station. A cellular phone needs to be
connected beforehand.
ªConnecting cellular phoneº
(page 1-13)
.[Details]:This appears only when a charging
station is set as a destination. Displays
detailed information including the type
and number of charging devices existing
at the selected charging station.
INFO:
Information about locations is not displayed
while driving.
&RQGLWLRQ 1$0


> (GLW    0RGHO 1DYL(9 @
GUID-FD38A9D2-BD38-4915-90E1-EFF73D4DAEA9
PROCEDURES AFTER SETTING
ROUTE
GUID-E83C964B-BC32-48FB-AF85-60942AFE2170After performing a route search, route guidance
can be started. Also, it is possible to confirm or
change a route.
LNE0102X
1. Touch [Route Details].
2. Touch the item you would like to set.
Available items after setting route
.[Start]:
Starts route guidance to the selected
destination.
ªStarting route guidanceº (page 3-39)
. [More Routes]:
Displays 3 alternative routes.
ªChanging route conditionº
(page 3-39)
. [Route Info]:
Displays the route information. A calculated
route can also be stored in the Address Book.
ªConfirming routeº (page 3-40)
. [Add Way Pt.]:
Allows you to edit the route by adding a
destination or waypoint.
ªAdding destination or waypointº
(page 3-41)
Starting route guidanceGUID-1EF85A2A-776D-4337-A8E2-61492E7591D6
LNE0102X
1. Touch [Start]. Route guidance starts.
INFO:
If no operations have been performed on the
system for several seconds, [Start] is automati-
cally selected, and the system starts route
guidance. When the vehicle is being driven,
[Start] is automatically selected and the system
will start the route guidance function.
Changing route conditionGUID-9AD893FA-42BC-4477-9A9F-DD22625256AA1. Touch [More Routes].
LNE0906X
2. Touch the preferred route condition. When the route is selected, a preview is displayed
on the right side of the screen. After
selecting the route condition, touch [OK].
Available route conditions
.[ECO] (green):
Prioritizes the least amount of electrical
consumption.
.[Short. Time] (purple):Prioritizes the shortest time.
.[Min. Freeway] (orange):Minimizes the use of freeways.
.[Short. Dist.] (pink):Prioritizes the shortest distance.
Navigation3-39
ROUTE GUIDANCE
&RQGLWLRQ 1$0


> (GLW    0RGHO 1DYL(9 @
3-40Navigation
INFO:
.The 4 routes may not always be different..When using waypoints, [More Routes] isdisabled. After route guidance is started,
change the route between each way-
point.
ªEditing routeº (page 3-48)
3. Touch [OK].
INFO:
LNE0928X
The remaining battery power estimation function
cannot be used to confirm condition changes
that arise after driving starts. Utilize the function
as a reference when selecting driving routes.
. After starting to drive, refer to the driving
range on the meter and perform battery
charging allowing for some leeway. .
The remaining battery power estimation
function cannot be used confirm condition
changes that arise after driving starts. Utilize
the function as a reference when selecting
driving routes.
. In the following instances, the actual battery
power may differ from the remaining battery
power estimation.
Ð Frequent repetition of sudden accelera-
tion and sudden braking
Ð Change of air conditioner operating conditions
Ð Change of traffic conditions and driving routes that differ from the one used for
the estimation
Ð Strong wind, cold, and snow weather conditions
Ð Tires that do not comply with specifica- tions, low air pressure tires, worn tires,
studless tires, and others.
Ð Decreased capacity of the Li-ion battery
Ð Installation of equipment that does not comply with specifications (carriers and
others)
Confirming routeGUID-29CA1EE4-BF66-428E-8EEA-11FCA02818BA1. Touch [Route Info].
LNE0104X
2. Touch the preferred information item.
Available information
. [Turn List]:
Displays the details of the suggested route.
ªUsing turn listº (page 3-52)
. [Store Route]:
Stores a calculated route. A maximum of 5
routes can be stored. Stored routes can be
easily retrieved and set as the suggested
route. If no waypoints are set on the route,
the route cannot be stored.
ªStoring routeº (page 3-60)
. [Map Scroll]:
Displays a map screen where the location of
the destination can be confirmed.
&RQGLWLRQ 1$0