lCheck ball joint for axial end play.
Tie-rod outer ball joint:
0mm(0in)
Tie-rod inner ball joint:
0mm(0in)
lCheck condition of dust cover. If cracked excessively, replace
it.
Assembly
1. Measure rack stroke.
Rack stroke ªSº:
Refer to SDS (ST-23)
2. Before installing boot, coat the contact surfaces between
boot and tie-rod with grease.
3. Tighten outer socket lock nut.
Tie-rod length ªLº:
Refer to SDS (ST-24)
SST334B
NST023
SST589B
SST093B
POWER STEERING GEAR AND LINKAGE
Inspection (Cont'd)
ST-19
General Specifications
Applied model
15²tire 16²tire
Steering model Power steering
Steering gear type PR25T
Steering overall gear ratio 16.7
Turn of steering wheel
(Lock to lock)2.7 2.6
Steering column type Tilt / collapsible
Inspection and Adjustment
STEERING WHEEL AND COLUMN STEERING GEAR
Applied model Tilt
Steering wheel axial play
mm (in)0 (0)
Steering wheel play
mm (in)35 (1.38) or less
Steering column length ªLº
mm (in)536 - 538 (21.10 - 21.18 in)
SST583B L
Steering gear typePower PR25T
15º tire 16º tire
Rack stroke ªSº mm (in) 68 (2.68) 66 (2.60)
Pinion rotating torque
N´m (kg-cm, in-lb)0.8 - 1.3
(8 - 13, 6.9 - 11.3)
Rack sliding force
N (kg, lb)284 (29, 64) or less
Steering wheel turning force
(Measured at one full turn
from neutral)
N (kg, lb)44.1 (4.5, 9.9) or less
Fluid capacity (Approximate)
(Imp qt)0.9 (3/4)
Oil pump relief pressure
kPa (bar, kg/cm
2, psi)SR: 7,002 - 7,600, (70 - 76,
71.4 - 77.5, 1,109 - 1,194)
QG: 7,502 - 8,101, (75 - 81,
76.5 - 82,6)
CD: 7,748 - 8,532 (77.5 - 85.3,
79 - 87, 1,123 - 1,237)
NST023
SERVICE DATA AND SPECIFICATIONS (SDS)
ST-23
