driver seat adjustment NISSAN QUEST 2014 RE52 / 4.G Quick Reference Guide

8
POwer SLIDING DOOr re LeaSe (if so equipped)
Use one of the following methods to open the power
sliding doors:

Press the driver’s side 01 or the passenger’s side

02 button on the NISSAN Intelligent k
ey® for
approximately 1 second.

From the driver’s seat, push the driver’s side 03 or
passenger’s side 04 sliding door switch for about
0.5 seconds. The switches are located on the
driver’s side instrument panel.

From the second row seats, push the sliding door
switch
05. The switch is located on either of the
second row door pillars.

Pull the sliding door handle (inside or outside) until
you hear the chime.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
0403
01
02
05
first drive features
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1490690_14_Quest_QRG_072513.indd 87/25/13 9:23 AM

9
FrONT PO wer SeaT aDJ uSTM eNTS (if so equipped)

To slide the seat forward or backward, push the
control switch
01 forward or backward.


To adjust the angle of the seatback, push the switch

02 forward or backward.
S EAT LIFTER (if so equipped for driver’s seat)

To raise or lower the height of the seat, push the switch 01 up or down.


To raise or lower the front portion of the seat, push the front or back end of the switch 01 up

or down.
POWER L UMBAR SUPPORT (if so equipped for driver’s seat)

To adjust the seat lumbar area, push the front or back portion of the switch 03.

For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
010203
PO wer LIFTGa Te reLeaSe (if so equipped)
Use one of the following methods to open the liftgate:

Press the button 01 on the NISSAN Intelligent
key® for more than 1 second.

Once unlocked, push the liftgate opener switch 02
while
carrying the Intelligent k ey with you.

From inside the vehicle, push the power liftgate switch

03 located on the instrument panel to the left of the
steering wheel.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
01
03
02
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
1490690_14_Quest_QRG_072513.indd 97/25/13 9:23 AM

11
3rD rOw S eaT aDJ uSTM eNTS

To adjust the angle of the seatback, pull the strap on
the seatback
01 and lean back. Release the strap

at the desired angle.
For more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
01
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
auTOMa TIC DrIVe POSITION er (if so equipped)
Two positions for the driver’s seat and outside
mirrors can be stored in the automatic drive
positioner memory.

Follow these procedures to set the memory positions:
• confirm the shift lever is in the P (P arK) position.
• Place the ignition switch in the ON position.
• Adjust the driver’s seat and outside mirrors to the desired positions, using the adjusting
switches for each feature.
• Push the S eT switch and within 5 seconds push the memory switch (1 or 2) for at
least 1 second.
• The indicator light on the memory switch you select will illuminate for approximately 5 seconds.
• The driver’s seat and outside mirror positions are now set to your preference.

These memorized positions can also be linked to your NISSAN Intelligent k ey®.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1490690_14_Quest_QRG_072513.indd 117/25/13 9:24 AM