headlights NISSAN SENTRA 2017 B17 / 7.G Quick Reference Guide
[x] Cancel search | Manufacturer: NISSAN, Model Year: 2017, Model line: SENTRA, Model: NISSAN SENTRA 2017 B17 / 7.GPages: 36, PDF Size: 2.99 MB
Page 13 of 36

11
NISSAN INTELLIGENT KEY® SYSTEM (if so equipped)
The Nissan Intelligent Key® system allows you to lock or unlock the vehicle, open the 
trunk and start the engine. It is important to make sure the Intelligent Key is with you 
(that is, in your pocket or purse).
 
   To lock the vehicle, push either door handle 
request switch 
1 once or press the  
button 
2 on the key fob.
 
    To unlock the vehicle, perform one of the 
following procedures:
    •  Push either door handle request switch 
1 
once; the corresponding door will unlock. 
Push the door handle request switch 
1 
again within 60 seconds; all other doors will 
unlock, or
    •  Press the 
 button 3 on the key fob to 
unlock the driver’s side door. Press the 
 
button 
3 again; all other doors  
will unlock.
 
    To release the trunk lid, press the  button 4 for more than 1 second. Lif t the trunk lid 
to access the trunk.
 
    The Intelligent Key can also be used to activate the panic alarm by pressing and 
holding the 
 button 5 for more than 0.5 seconds. Once activated, the panic 
alarm and headlights will stay on for a period of time.
Please see your Owner’s Manual for important safety information, system limitations, and additional 
operating and feature information.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your  
Owner’s Manual.
1
2
3
4
5
FIRST DRIVE FEATURES
TRUNK LID RELEASE SWITCH
Use one of the following methods to unlatch the 
trunk lid then raise the lid to open the trunk:
 
    Push the trunk opener request  
switch 
1, located under the trunk 
handle in the center, for more than  
1 second. The doors must be unlocked 
or the Nissan Intelligent Key® must be 
with you (that is, in your pocket or purse).
 
   Press  the HOLD button 2 on the key fob for 
more than 1 second.2
1
1
2434454_17b_Sentra_US_pQRG_101416.indd   1110/14/16   10:59 AM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.  
Page 15 of 36

13
STARTING/STOPPING THE ENGINE
CONTINUOUSLY VARIABLE TRANSMISSION  
(Nissan Intelligent Key® models only -  
if so equipped)
 
    It is important to make sure the Intelligent 
Key is with you (that is, in your pocket 
or purse).
 
  Depress the brake pedal.
    •  If the brake pedal is not depressed,  
pushing the ignition switch once enters the ACC mode.
    •  If the ignition switch is pushed a second time, the vehicle will enter  
the ON mode.
 
    Move the shif t lever to the P (PARK) position.
 
    Press the ignition switch START/STOP button to start the engine. 
MANUAL TRANSMISSION (if so equipped) 
 
  Depress the brake pedal.  
 
  Depress the clutch pedal to the floor.  
 
  Move the shif t lever to the N (NEUTRAL) position.  
 
  Turn the key to the S TA R T  position.
TURNING THE ENGINE OFF
 
    For a manual transmission, apply the brake pedal, depress the clutch pedal, 
place the vehicle in 1 (FIRST) gear, apply the parking brake and turn the  
ignition off.
 
    For a Continuously Variable Transmission (CVT models) (if so equipped), apply 
the brake pedal, move the shif t lever to the P (PARK) position, apply the parking 
brake and press the ignition switch START/STOP button. 
Please see your Owner’s Manual for important safety information, system limitations, and additional 
operating and feature information.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
HEADLIGHT CONTROL SWITCH
HEADLIGHT CONTROL
     Turn the headlight control switch to the  
position 1 to turn on the front parking, tail, 
license plate and instrument panel lights. Turn 
the switch to the 
 position 2 to turn on 
the headlights.
AUTOLIGHT SYSTEM 
 
    The autolight system will automatically turn 
the headlights on when it is dark and off when it is light. The system will keep the 
headlights on for a period of time af ter you turn the ignition off and all doors   
are closed.
1
2
3
2434454_17b_Sentra_US_pQRG_101416.indd   1310/14/16   10:59 AM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.  
Page 16 of 36

14
    To activate the autolight system, turn the headlight control switch to the AUTO  
position 3 then place the ignition switch in the ON position. To deactivate the 
autolight system, turn the headlight control switch to the OFF  position,  
position 1 or  position 2. 
HIGH BEAM SELECT
 
    With the headlights ON (either in the AUTO  
position 3 or   position 2), push the 
headlight control switch forward 4 to select 
the high beam function. The blue indicator 
light 
 will illuminate in the instrument panel. 
Pull the headlight switch back to the original 
position to select the low beam. The blue indicator light will extinguish.
 
    Pull and release the headlight control switch 5 to flash the headlight high 
beams on and off.
FOG LIGHT SWITCH (if so equipped)
 
    The headlights must be in the AUTO  position 3 or the low beams  selected for the fog 
lights to operate.
 
    Turn the switch (inside collar) to the  
position 6 to turn the fog lights on.
 
    Turn the switch (inside collar) to the OFF position to turn the fog lights off.
LANE CHANGE SIGNAL
 
    Move the lever up or down until the turn signal begins to flash but the lever   
does not latch to signal a lane change. Hold the lever until the lane change   
is completed.
 
    Move the lever up or down until the turn signal begins to flash but the lever does 
not latch and release the lever. The turn signal will automatically flash three times.
Choose the appropriate method to signal a lane change based on road and   
traffic conditions.
Please see your Owner’s Manual for important safety information, system limitations, and additional 
operating and feature information.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
6
45
WIPER AND WASHER SWITCH
     Move the lever to one of the following 
positions to operate the windshield wipers: 
  
1   Mist (MIST) – One sweep operation of  
the wipers.
  
2   Intermittent (INT) – Wipers operate 
intermittently. The intermittent operation 
speed can be adjusted by twisting the 
time control ring 
3 to increase or 
decrease wiper speed.
  
4   Low ( LO) – Wipers operate at a continuous low-speed.
1
2
4
5
MIST
OFFINT
LO
HI3
FIRST DRIVE FEATURES
2434454_17b_Sentra_US_pQRG_101416.indd   1410/14/16   10:59 AM
To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi.