EI-23 NISSAN TEANA 2003 User Guide

FRONT WIPER AND WASHER SYSTEM
WW-39
C
D
E
F
G
H
I
J
L
MA
B
WW

Removal and Installation of Front Washer PumpBKS003WG
REMOVAL
1. Remove fender protector RH on front side. Refer to EI-23,
"FENDER PROTECTOR" .
2. Disconnect front washer pump connector and remove washer
tube.
3. Pull out washer pump in direction shown by the arrow ( ) in the
figure. Remove front washer pump from washer tank.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
When installing front washer pump, there should be no packing twists, etc.
SKIB0910E

HEADLAMP WASHER
WW-57
C
D
E
F
G
H
I
J
L
MA
B
WW

Removal and Installation of Headlamp Washer NozzleBKS002EX
REMOVAL
1. Pull out headlamp washer nozzle from a bumper, remove pawl
(A), and remove headlamp washer nozzle cover (1).
2. Remove undercover one.
3. Remove fender protector. Refer to EI-23, "
FENDER PROTEC-
TOR" .
4. Remove front bumper. Refer to EI-14, "
FRONT BUMPER" .
5. Remove headlamp washer tube (1). Refer to WW-58, "
Removal
and Installation of Headlamp Washer Tube Connector" .
6. Removal headlamp washer nozzle retainer (A).
7. Removal headlamp washer nozzle bracket (2).
8. Remove headlamp washer nozzle assembly (3).

The check valve is installed in headlamp washer nozzle
assembly.

The check valve prevents backflow of washer fluid.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
When installing nozzle, there should be no packing twist, etc.
AdjustmentBKS002EY
PKIC9877E
PKIC9878E
PKIC9879E
a: 45° ±3°
b: 46° ±3°
c: 14° ±3°
d: 11° ±3°