Ioni NISSAN TEANA 2008 Service Manual

HEADLAMP WASHER NOZZLE AND TUBE
WW-97
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
MA
B
WW
N
O
P
ON-VEHICLE REPAIR
HEADLAMP WASHER NOZZLE AND TUBE
Exploded ViewINFOID:0000000003761621
Hydraulic LayoutINFOID:0000000003761622
Removal and InstallationINFOID:0000000003761623
REMOVAL
1. Headlamp washer nozzle cover 2. Headlamp washer nozzle assembly
JPLIA1130ZZ
1. Headlamp washer nozzle assembly
(LH)2. Headlamp washer tube 3. Headlamp washer nozzle assembly
(RH)
A. Headlamp washer tube joint
: Clip
JPLIA1131ZZ

WW-98
< ON-VEHICLE REPAIR >
HEADLAMP WASHER NOZZLE AND TUBE
1. Push pawl (A), and remove the headlamp washer nozzle cover
(1).
2. Remove the front bumper fascia. Refer to EXT-11, "
Exploded
View".
3. Disconnect the headlamp washer tube from the headlamp
washer nozzle assembly.
4. Remove the headlamp washer nozzle mounting bolt.
5. Remove the headlamp washer nozzle assembly from the front
bumper fascia.
INSTALLATION
Install in the reverse order of removal.
InspectionINFOID:0000000003761624
HEADLAMP WASHER NOZZLE SPRAY POSITION INSPECTION
Check that the headlamp washer injection is certainly on the head-
lamp illuminating area. If the injection is out of the area, check the
headlamp washer tube and headlamp washer nozzle leakages.
JPLIA1132ZZ
JPLIA1133ZZ

WASHER TANK
WW-99
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
MA
B
WW
N
O
P
WASHER TANK
Exploded ViewINFOID:0000000003761625
Removal and InstallationINFOID:0000000003761626
REMOVAL
1. Pull out the washer tank inlet from the washer tank.
2. Remove the front bumper fascia. Refer to EXT-11, "
Exploded View".
3. Disconnect the washer pump connector.
4. Disconnect the headlamp washer pump connector.
5. Disconnect the washer tube.
6. Disconnect the headlamp washer tube.
7. Remove the washer tank mounting bolts.
8. Remove the washer tank from the vehicle.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Add water up to the top of the washer tank inlet after installing. Check that there is no leakage.
1. Washer tank inlet 2. Washer tank
JPLIA1134ZZ

WW-100
< ON-VEHICLE REPAIR >
WASHER PUMP
WASHER PUMP
Exploded ViewINFOID:0000000003761627
Removal and InstallationINFOID:0000000003761628
REMOVAL
1. Remove the fender protector RH (front). Refer to EXT-22, "FENDER PROTECTOR : Exploded View".
2. Disconnect the washer pump connector.
3. Disconnect the washer tube.
4. Remove the washer pump from the washer tank.
5. Remove the packing from the washer tank.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Never twist the packing when installing the washer pump.
1. Washer tank 2. Washer tube 3. Washer pump
4. Washer pump connector 5. Packing
: Vehicle front
JPLIA1135ZZ

HEADLAMP WASHER PUMP
WW-101
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
MA
B
WW
N
O
P
HEADLAMP WASHER PUMP
Exploded ViewINFOID:0000000003761629
Removal and InstallationINFOID:0000000003761630
REMOVAL
1. Remove the fender protector RH (front). Refer to EXT-22, "FENDER PROTECTOR : Exploded View".
2. Disconnect the headlamp washer pump connector.
3. Disconnect the headlamp washer tube.
4. Remove the headlamp washer pump from the washer tank.
5. Remove the packing from the washer tank.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Never twist the packing when installing the headlamp washer pump.
1. Washer tank 2. Packing 3. Clip
4. Headlamp washer tube 5. Headlamp washer pump 6. Headlamp washer pump connector
JPLIA1136ZZ

WW-102
< ON-VEHICLE REPAIR >
FRONT WASHER NOZZLE AND TUBE
FRONT WASHER NOZZLE AND TUBE
Hydraulic LayoutINFOID:0000000003761632
Removal and InstallationINFOID:0000000003761633
REMOVAL
1. Open the hood.
2. Remove the washer nozzle in numerical order shown in the fig-
ure.
3. Disconnect the washer tube from the washer nozzle.
INSTALLATION
1. Connect the washer tube into the washer nozzle.
2. Fix the pawl-side behind the washer nozzle first, then push the resin clip-side.
3. Adjust the washer nozzle spray position. Refer to WW-102, "
Inspection and Adjustment".
CAUTION:
The spray positions differ. Check that left and right nozzles are installed correctly.
Inspection and AdjustmentINFOID:0000000003761634
INSPECTION
Washer Nozzle Inspection
1. Washer nozzle 2. Washer tube 3. Washer tank
: Clip
JPLIA1137ZZ
: Vehicle front
JPLIA1138ZZ

FRONT WIPER ARM
WW-105
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
MA
B
WW
N
O
P
FRONT WIPER ARM
Exploded ViewINFOID:0000000003761635
Removal and InstallationINFOID:0000000003761636
REMOVAL
1. Operate the front wiper to move it to the auto stop position.
2. Open the hood.
3. Remove the wiper arm cap.
4. Remove the wiper arm mounting nut.
5. Raise wiper arm, and remove the wiper arm from the vehicle.
INSTALLATION
1. Clean wiper arm mount as shown in the figure to prevent nuts
from being loosened.
2. Operate the front wiper motor to move the wiper to the auto stop
position.
3. Adjust the wiper blade position. Refer to WW-105, "
Adjustment".
4. Install the wiper arm by tightening the mounting nut.
5. Inject the washer fluid.
6. Operate the front wiper to move it to the auto stop position.
7. Check that the wiper blades stop at the specified position.
8. Install the wiper arm cap.
AdjustmentINFOID:0000000003761637
WIPER BLADE POSITION ADJUSTMENT
Clearance between the end of cowl top cover and the top of wiper blade center
1. Wiper blade (RH) 2. Wiper arm (RH) 3. Wiper blade (LH)
4. Wiper arm (LH) 5. Wiper arm cap
Refer to GI-4, "
Components" for symbols in the figure.
JPLIA1142GB
ELH0717D

FRONT WIPER DRIVE ASSEMBLY
WW-107
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
K
MA
B
WW
N
O
P
FRONT WIPER DRIVE ASSEMBLY
Exploded ViewINFOID:0000000003761638
REMOVAL VIEW
DISASSEMBLY VIEW
Removal and InstallationINFOID:0000000003761639
REMOVAL
1. Remove the wiper arm. Refer to WW-105, "Exploded View".
2. Remove the cowl top cover. Refer to EXT-20, "
Exploded View".
3. Remove bolts from the front wiper drive assembly.
1. Front wiper drive assembly
JPLIA1143ZZ
1. Wiper linkage 1 2. Shaft seal 3. Front wiper motor
4. Wiper linkage 2 5. Wiper frame 6. Bracket
: Multi−purpose grease or an equivalent.
JPLIA1144ZZ