1268 NISSAN TERRANO 2004 Service Repair Manual

IDLER GEAR END PLAY
ITighten the holding bolts to the specification.
I Measure the clearance between the gear plate and idler gear
using a feeler gauge.
Unit: mm (in)
Standard Limit
Idler gear (A) 0.06 - 0.12
(0.0024 - 0.0047) 0.15 (0.0059)
Idler gear (B)
I If it exceeds the limit, replace the idler gear, shaft, and gear
plate.
IDLER GEAR OIL CLEARANCE
IMeasure the inner diameter (d1) of the idler gear shaft.
Standard: Idler gear (A)43.000 - 43.020 mm (1.6929 - 1.6937 in) dia.
Idler gear (B) 28.600 - 28.620 mm (1.1260 - 1.1268 in) dia.
I Measure the outer diameter (d2) of the idler shaft.
Standard: Idler gear (A)42.959 - 42.975 mm (1.6913 - 1.6919 in) dia.
Idler gear (B) 28.567 - 28.580 mm (1.1247 - 1.1252 in) dia.
I Calculate the oil clearance.
Clearance = d1 þ d2
Unit: mm (in)
Standard Limit
Idler gear (A) 0.025 - 0.061
(0.0010 - 0.0024) 0.2 (0.0079)
Idler gear (B) 0.020 - 0.053
(0.0008 - 0.0021)
I If it exceeds the limit, refer to each standard specification and
replace the idler gear and/or shaft.
BALANCER SHAFT END PLAY
IMeasure the clearance between the plate and gear using a
feeler gauge.
Standard: 0.07 - 0.22 mm (0.0028 - 0.0087 in)
I If it exceeds the specification, replace the balancer shaft
assembly.
I As the gears are press-fitted, there are no setting for individual
parts.
FEM037
FEM038
TIMING GEARZD
Inspection (Cont'd)
EM-42
http://vnx.su/