PN switch NISSAN TIIDA 2009 Service Repair Manual

OK >> Replace BCM. Refer to
BCS-18, " Removal and Installa-
tion of BCM " .
NG >> Replace rear wiper motor. Refer to WW-32, " Removal
and Installation " .
Only Rear Wiper Does Not Operate INFOID:0000000004306943OK >> Replace BCM. Refer to
BCS-18, " Removal and Installation of BCM " .
NG >> Check the wiper switch. Refer to BCS-3, " System Description " .
Only Rear Wiper Intermi ttent Does Not Operate INFOID:0000000004306944OK >> Replace BCM. Refer to
BCS-18, " Removal and Installation of BCM " .
NG >> Check the wiper switch. Refer to BCS-3, " System Description " .
Wiper Does Not Wipe When Rear Washer Operates INFOID:0000000004306945OK >> Replace BCM. Refer to
BCS-18, " Removal and Installation of BCM " .
NG >> Check the wiper switch. Refer to BCS-3, " System Description " .
Removal and Installation INFOID:0000000004306946
REAR WIPER ARM
Removal 2 - Ground : Battery voltage should exist.

WW
N
O P
Removal
1. Remove the back door window garnish. Refer to EI-38, " Removal and Installation " .
2. Disconnect rear washer tube from rear washer nozzle.
3. Release retaining clips and remove washer nozzle.
Installation Installation is in the reverse order of removal.
NOTE:
Inspect rear washer nozzle for proper spray pattern, adjust as necessary. Refer to WW-35, " Washer Nozzle
Adjustment " .
WASHER FLUID RESERVOIR Refer to WW-23, " Removal and Installation of Washer Tank " .
WIPER AND WASHER SWITCH Refer to WW-23, " Removal and Installation of Front Wiper and Washer Switch " .
WASHER MOTOR Refer to WW-24, " Removal and Installation of Front Washer Motor " .
Washer Nozzle Adjustment INFOID:0000000004306947
Adjust the washer nozzle to specification using suitable tool as
shown.
• Rear washer nozzle (1)
• Back glass (2)
• Center line (A)
• 148 mm (5.83 in) (B)
• 27 mm (1.06 in) (C)
• 35 mm (1.38 in) (D)
• Black printed area (E)
• Spray target area (F) WKIA6042E