trip computer NISSAN TITAN 2008 1.G Quick Reference Guide

9
INsTR uMENT BRI gHTNE ss CONTROL/TRIP
CHAN gE B uTTON
The instrument brightness control operates when
the headlight control switch is in the
or
position.
Turn the control to adjust the brightness of the
instrument panel lights.
Press the change button to select trip computer
features.
CLOCK sET/ADJ usTMENT ( Non Navigation system only)
The clock on the radio screen can be adjusted using the following procedure:
 Press and hold the H button to advance hours.
 Press and hold the M button to advance minutes.
Refer to the Owner’s Manual for additional information.
CLOCK sET/ADJ usTMENT ( single CD only
)
If the clock is not displayed with the ignition switch in the ACC or ON position, you
need to select the CLK ON mode. Press the MeNU button repeatedly until CLOCK is
displayed. Use the See K button to enable CLK ON mode.
 Press the MeNU button repeatedly until CLOCK mode appears; press the See K
button until CLK ON appears.
 Press the MeNU button again; the hours will start flashing.
 Press the See K button to adjust the hour.
 Press the MeNU button again; the display will switch to the minute adjustment mode.
The minutes will start flashing. Press the See K button to adjust the minutes.
 Press the MeNU button again to exit the clock set mode.
Refer to the Owner’s Manual for additional information.