navigation system NISSAN X-TRAIL 2003 Service User Guide

NAVIGATION SYSTEM
AV-47
C
D
E
F
G
H
I
J
L
MA
B
AV

Display With Pushed “ROUTE” Switch

Easy Mode

Expert Mode
The Function of Each Icon Is as Follows:
*: When destinations have been entered, route guidance has been turned OFF or destination has been reached, “Route Info.” and “Edit
Route” are not displayed.
SKIA1382E
SKIA1383E
IconMODE
Description
Easy Expert
Quick Stop××The selected facility is set as the destination or waypoint.
(Route guidance has been turned OFF or the destination has been reached)
Where am I?××Next, current and previous street names can be displayed.
Route Info.*×The following items can be set.

Complete Route

Tu rn List

Route Simulation
(Displayed only when the destination area has been set.)
Edit Route*×Change the destination or add the transit points of the route set in the route guide. (Dis-
played only when the automatic reroute function has been turned OFF and the recom-
mended route is not followed.)
Route Calculation×This key is used to start the route calculation after all the settings are completed.
Help×Explanation of Navigational functions appear on the Display.

AV-48
NAVIGATION SYSTEM

Display With Pushed “SETTING” Switch
The Function of Each Icon Is as Follows:
Display with Pushed “INFO” Button

When the “INFO” button is pushed, the following items will display on the screen.

Warning message (if there are any) →DRIVE INFORMATION→MAINTENANCE INFOMATION→OFF.
“LANGUAGE SETTINGS” mode

Select one of the languages which appear on the screen.
NOTE:
Languages that do not appear on the screen must be loaded from
program disk.
SKIA9143E
Icon Description
Display Settings of display can be performed.
LanguageLanguage can be selected for the display and voice guidance.
Use the program CD-ROM disc to change the language.
Navigation Settings and adjusting of navigation can be performed.
Navigation Expert Mode Easy Mode and Expert Mode can be switched.
Guidance Volume The volume and/or on/off of voice prompt can be controlled by the joystick.
Help Explanation of Navigational Functions Appear on the Display.
Display items Display/Setting contents
DRIVE INFORMATIONElapsed Time Displays driving time with a range of 0:00:00 to 9999:59:59.
Driving Distance
[(km) or (miles)] Displays driving distance with a range of 0.0 to 99999.9.
Average speed
[(km/h) or (MPH)]Displays average speed with a range of 0.0 to 999.9.
MAINTENANCE INFOMATIONReminder 1 Maintenance intervals of vehicle's consumables and setting of cycles.
Reminder 2 Maintenance intervals of vehicle's consumables and setting of cycles.
Reminder 3 Maintenance intervals of vehicle's consumables and setting of cycles.
SKIA1399E

NAVIGATION SYSTEM
AV-49
C
D
E
F
G
H
I
J
L
MA
B
AV

“NAVIGATION SETTINGS” mode
How To Perform Navigation Settings
1. Start the engine.
2. Push “SETTING” button.
3. Select “Navigation” key.

Easy Mode

Expert Mode
SKIA9543E
SKIA1385E

AV-50
NAVIGATION SYSTEM

Application Items
“VIEW” Mode
1. Select “BIRDVIEW® ” or “Plan view” icon.

To open the map screen display with BIRDVIEW® , select
“BIRDVIEW
® ”.

To open the map screen display with Plan View, select “Plan
View”.
“HEADING” Mode

To display the car heading up, select “Heading up”.

To display North up, select “North up”.
IconMODE
DescriptionRefer-
ence
page Easy Expert
View××Map display mode can be switched.AV- 5 0
Heading××Heading of the map display can be customized for either north head-
ing or the actual driving direction of the vehicle.AV- 5 0
Nearby Display Icons×Icons of facilities can be displayed.
Facilities to be displayed can be selected from the variety selections.AV- 5 1
Save Current Location×Current vehicle location can be registered in Address Book.AV- 5 1
Edit Address Book×Address Book can be edited.AV- 5 1
Clear Memory×Address Book, Previous destination or Avoid area can be deleted.AV- 5 1
Auto Re-route On / Off×On / Off of Auto Re-route can be switched.AV- 5 2
Quick Stop Customer Setting×One facility of your selection can be added to your Quick Stop.AV- 5 2
Set Average speed for Estimated
Journey Time×Average vehicle speed can be set to calibrate estimated journey
time for the destination.AV- 5 2
GPS Information×The GPS data includes longitude, latitude and altitude (distance
above sea level) of the present vehicle position, and current date
and time for the area in which the vehicle is being driven.
Also indicated are the GPS reception conditions and the GPS satel-
lite position.AV- 5 2
Avoid Area Setting×A particular area can be avoided when routing.AV- 5 3
Tracking On / Off×Tracking to the present vehicle position can be displayed.AV- 5 3
Adjust Current Location×Current location of position marker can be adjusted. Direction of
position marker also can be calibrated when heading direction of the
vehicle on the display is not matched with the actual direction.AV- 5 3
Switch beep On / Off×Button tone can be selected On / Off.AV- 5 4
SKIA0554E
SKIA0561E

NAVIGATION SYSTEM
AV-51
C
D
E
F
G
H
I
J
L
MA
B
AV

“NEARBY DISPLAY ICONS” Mode

Select an icon to display on the map screen.
“SAVE CURRENT LOCATION” Mode

The current vehicle location can be registered in “Address
Book”.
NOTE:
“Address Book” can store 50 items max.
“EDIT ADDRESS BOOK” Mode

Edit the items registered in Address Book.
“CLEAR MEMORY” Mode

To delete all the stored places in “Address Book”, “Avoid Area”
and “Previous Dest”, select “Yes”.
SKIA1394E
SKIA1388E
SKIA0560E
SKIA9146E

AV-52
NAVIGATION SYSTEM

“AUTO RE-ROUTE” Mode

To Perform the auto re-route of route, select “ON”.

Not to Perform the auto re-route of route, select “OFF”.
“QUICK STOP CUSTOMER SETTINGS” Mode

Select a category for the “Quick Stop” menu.
“SET AVERAGE SPEED ” Mode

Set the average vehicle speed to calibrate the estimated journey
time for the destination.

Set three items; “Motorway”, “Main Roads”, and “Ordinary
Roads”.
“GPS INFORMATION” Mode

Latitude, longitude, altitude, astrometric state, and satellite loca-
tion are displayed as GPS information.
NOTE:
Altitude is displayed only in three-dimensional status.
SKIA0558E
SKIA1389E
SKIA9544E
SKIA0555E

NAVIGATION SYSTEM
AV-53
C
D
E
F
G
H
I
J
L
MA
B
AV

“AVOID AREA SETTINGS” Mode

Areas to avoid can be registered.
“TRACKING” Mode

To leave a trail in the map, select “On”.

To leave no trail on the map, select “Off”.
NOTE:
When a trail display is turned OFF, trail data is erased from the mem-
ory.
“ADJUST CURRENT LOCATION” Mode
1. Select an icon “right” or “left” to calibrate the heading direction.
(Arrow marks will rotate corresponding to the calibration key.)
2. Select “Set”. Then the vehicle mark will be matched to the arrow
mark.
SKIA0563E
SKIA9545E
SKIA1395E
SKIA1396E

AV-54
NAVIGATION SYSTEM

“BUTTON TONE / BEEP RESPONSE” Mode
Select “Switch Beep”.

When Beep Setting is on (indicator light on), a beep will sound if
the button is pushed.
NOTE:
Items in exception of Beep Setting ON/OFF.

An error beep.

An interrupted-screen beep.
“GUIDANCE VOLUME SETTING” MODE
Description
Following voice guidance setting can be changed.
Activation/Deactivation Setting

The voice prompt can be turned on/off by pressing the “Guidance Volume” button.
Vo i c e Vo l u m e S e t t i n g

Volume of the voice can be controlled by bending the joystick to left/right.
Precautions for NAVI Control Unit ReplacementEKS00F2T

When replacing the NAVI control unit, eject the map DVD-ROM before disconnecting the battery.

The NAVI control unit has the following information stored in its memory. Record the memory contents
before replacing the control unit, and input them in the new unit as necessary.
NOTE:
Only removing the battery does not erase the memory.
SKIA9148E
SKIA9149E

Brightness of light when ON/OFF

Dimming switching

Display color switching


Latest status (map screen/BIRDVIEW® , reduced scale, rotation angle
of map screen, route guide ON/OFF, track ON/OFF, etc.)

Current position

Destination, passing point 1 - 5

Registered places, their names, etc.

NAVIGATION SYSTEM
AV-55
C
D
E
F
G
H
I
J
L
MA
B
AV

Component Parts And Harness Connector LocationEKS00F2U
SKIA9199E

AV-56
NAVIGATION SYSTEM

SchematicEKS00F2V
TKWA1596E