NISSAN XTERRA 2007 N50 / 2.G Navigation Manual

NAV2836
3. Highlight the city of the destination from the
list and push.
Setting a destination4-9

NAV2787
SETTING A CITY CENTER
1. Highlight [Others] and push.
NAV2837
2. Highlight [City Center] and push
.
A character input screen is displayed.
NAV3075
INFO:
Character input screen for City Center
&1Region:
The region previously entered is auto-
matically displayed. It can be changed.
&2City:
“All” is displayed, and all cities in the
region are available. Route calculation
conditions can be narrowed down by
entering the name of the city.
4-10Setting a destination

&3Symbols/A-Z:
Symbol keys are displayed by high-
lighting [Symbols] and pushing
. Alphabet keys are dis-
played by highlighting [A-Z] and push-
ing.
NAV3076
3. Highlight [City] and pushto
narrow down the route calculation condi-
tions by entering the name of the city.
Enter the name of the city, highlight [OK] and
push.
A list screen is displayed.
INFO:
Highlight [Last 5 Cities] and push
to display 5 cities recently set
as destinations.
NAV2840
4. Highlight the preferred destination from the
list and push.
The position of the selected location is
displayed in the preview on the right side
of the screen.
Setting a destination4-11

NAV2841
INFO:
By selecting [By Distance], you can sort the
list by the nearest distance.
NAV2842
5. The selected destination is displayed at the
center of the map. Highlight [OK] after
confirming the location of the displayed
destination, and push.
The system sets the destination to the
selected location and starts calculating a
route.
NAV2843
INFO:
Even after setting a destination, you can
adjust the location of the destination, store
the route, etc.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-50)
4-12Setting a destination

NAV3077
Changing the region
1. Highlight [Region] and pushto
change the region.
NAV3078
2. Highlight the preferred region and push
.
A character input screen is displayed.
Setting a destination4-13

NAV2787
SETTING AN INTERSECTION
1. Highlight [Others] and push.
NAV2846
2. Highlight [Intersection] and push
.
A character input screen is displayed.
4-14Setting a destination

NAV3079
INFO:
Character input screen for Intersection
&1Region:
The region previously entered is auto-
matically displayed. It can be changed.
&2City:
“All” is displayed, and all cities in the
region are available. Route calculation
conditions can be narrowed down by
entering the name of the city.
&31st Street:
Enter the name of the 1st street of the
destination intersection.
&42nd Street:
Enter the name of the 2nd street of the
destination intersection.
&5Symbols/A-Z:
Symbol keys are displayed by high-
lighting [Symbols] and pushing
. Alphabet keys are dis-
played by highlighting [A-Z] and push-
ing.
Setting a destination4-15

NAV3080
3. Enter the name of the 1st street.
After finishing the entry, highlight [OK] and
push.
A list screen is displayed.
NAV2849
4. Highlight a street as the 1st street from the
list and push.
NAV3081
5. Enter the name of the 2nd street.
After finishing the entry, highlight [OK] and
push.
A list screen is displayed.
4-16Setting a destination

NAV2851
6. Highlight a street as the 2nd street from the
list and push.
NAV2852
7. The selected destination is displayed at the
center of the map. Highlight [OK] after
confirming the location of the displayed
destination, and push.
The system sets the destination to the
selected location and starts calculating a
route.
NAV2853
INFO:
Even after setting a destination, you can
adjust the location of the destination, store
the route, etc.
“OPERATIONS AFTER SETTING A
DESTINATION” (page 4-50)
Setting a destination4-17

NAV3082
Changing the region
1. Highlight [Region] and pushto
change the region.
NAV3083
2. Highlight the preferred region and push
.
A character input screen is displayed.
NAV3084
Specifying a city
1. Highlight [City] and pushto
narrow down the route calculation condi-
tions by entering the name of the city.
4-18Setting a destination