change time Oldsmobile Achieva 1995 Owner's Manuals
[x] Cancel search | Manufacturer: OLDSMOBILE, Model Year: 1995, Model line: Achieva, Model: Oldsmobile Achieva 1995Pages: 340, PDF Size: 16.99 MB
Page 4 of 340
GENERAL MOTORS, GM and the GM Emblem,
OLDSMOBILE and
the OLDSMOBTLE Rocket
Emblem are registered trademarks
of General Motors
Corporation.
This manual includes the latest information at
the time it
was printed. We reserve the right to make changes in the
product after that time without further notice. For
vehicles first sold in Canada, substitute the name
“General Motors of Canada Limited” for Oldsmobile
Division whenever it appears
in this manual.
Please keep this manual
in your Oldsmobile, so it will
be there if you ever need it when you’re on the road. If
you sell the vehicle, please leave this manual in it so the
new owner can use it.
Litho in
U.S.A.
Part No. 22595791 B First Edition We
support voluntary
technician certification.
WE SUPPORT
VOLUNTARY TECHNICIAN
CERTIFICATION THROUGH
AUTOMOTIVE National Institute for
EXCELLENCE SERVICE
For Canadian Owners Who Prefer a
French Language Manual:
Aux proprietaires canadiens: Vous pouvez vous procurer
un exemplaire de ce guide en franpis chez votre
concessionaire
ou au DGN Marketing Services Ltd.,
1500 Bonhill Rd., Mississauga, Ontario L5T 1C7.
@Copyright General Motors Corporation
1994
All Rights Reserved
ii
Page 63 of 340
This device complies with Part 15 of the FCC Rules.
Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
Should interference to this system occur, try this:
Check to determine if battery replacement is
necessary. See the instructions on battery
replacement.
Check the distance. You may be too far from your
vehicle. This product has a maximum range.
Check the location. Other vehicles or objects may be
blocking the signal.
See your Oldsmobile retailer or a qualified
technician for service.
Changes or modifications to
this system by other than an
authorized service facility could void authorization to
use this equipment.
Operation
The driver’s door will unlock when UNLOCK is
pressed.
If pressed again within five seconds, all doors
will unlock. All doors will lock when
DOOR is pressed.
The trunk will unlock anytime when the vehicle symbol
on the Remote
Lock Control is pressed and the ignition is
off. If the ignition is on, the trunk will unlock if the
parking brake is set (manual transaxle) or
the gear selector
is in PARK
(P) or NEUTRAL, (N) (automatic transaxle).
Press
DOOR or UNLOCK to illuminate the interior
lamps. The lamps will then
go off after 40 seconds when
UNLOCK is pressed and four seconds when
DOOR is
pressed. When the ignition is turned on, the lamps will
also fade out (see Illuminated EntryExit System earlier
in this section).
Matching Transmitter(s) To Your Vehicle
Each key chain transmitter is coded to prevent another
transmitter from unlocking your vehicle.
If a transmitter
is lost or stolen,
a replacement can be purchased through
your retailer. Remember to bring any remaining
transmitters with you when you
go to your retailer.
When the retailer matches the replacement transmitter to
your vehicle, the remaining transmitters must also be
matched. Once the new transmitter
is coded, the lost
transmitter will not unlock your vehicle.
2-7
Page 64 of 340
You can match a transmitter to as many different
vehicles as
you own, provided they are equipped with
exactly the sume model system. (General Motors offers
several different models
of these systems on their
vehicles.) Each vehicle can have only two transmitters
matched to it.
See your retailer to match transmitters to another
vehicle.
Battery Replacement
Under normal use, the batteries in your key chain
transmitter should last about two years.
You can tell the batteries are weak if the transmitter
won’t work at the normal range in any location. If you
have to get close to your vehicle before the transmitter
works, it’s probably time to change the batteries. To Replace Batteries in the Remote Lock Control
1. Pop the cover off by inserting a coin or similar
object in the slot between the covers, and then
twisting.
2. Lift the front cover off, bottom half first.
3. Remove and replace the two batteries. Use two
Duracell@ batteries, type DL-20
16, or equivalent.
4. Replace the front cover. Make sure the cover is on
tightly, so water won’t get in.
5. Check the transmitter operation.
2-8
Page 72 of 340
3. If your engine still won’t start (or starts but then
stops), it could be flooded with too much gasoline.
Try pushing your accelerator pedal all the way
to the
floor and holding it there as you hold the key
in
START for about three seconds. This clears the extra
gasoline from the engine. If the vehicle starts briefly
but then stops again, do the same thing, but this time
keep the pedal about one-quarter
of the way down
for five
or six seconds.
NOTICE:
Your engine is designed to work with the
electronics in your vehicle.
If you add electrical
parts or accessories, you could change the way
the fuel injection system operates. Before adding
electrical equipment, check with your retailer.
If
you don’t, your engine might not perform
properly.
If you ever have to have your vehicle towed, see
the part
of this manual that tells how to do it
without damaging your vehicle. See “Towing
Your Vehicle’’ in the Index. To
start your
3.1 Liter engine:
I. Without pushing t.he accelerator pedal, turn your
ignition key to
START. When the engine starts, let
go of the key. The idle speed will go down as your
engine gets warm.
NOTICE:
Holding your key in START for longer than
15 seconds at a time will cause your battery to be
drained much sooner. And the excessive heat can
damage your starter motor.
2. If your engine won’t start (or starts but then stops), it
could be flooded with too much gasoline. Try
pushing your accelerator pedal all the way to the
floor and holding
it there as you hold the key in
START for about three seconds. If the vehicle starts
briefly but then stops again, do
the same thing, but
this time keep the pedal down for five or six seconds.
This clears the extra gasoline from the engine.
2-16
-
Page 101 of 340
When it’s bright enough outside, the regular lamps will
go off, and your high and low-beam headlamps change
to the reduced brightness of the
DRL.
To idle your vehicle with the DRL off, set the parking
brake
on a manual transaxle or put the vehicle in PARK
(P) or NEUTRAL (N) on an automatic transaxle, while
the ignition is in the
OFF or LOCK position. Then start
the vehicle. The
DRL will stay off until you release the
parking brake on a manual transaxle or shift out of
PARK (P) or NEUTRAL
(N) on an automatic transaxle.
Front Reading Lamps (Option)
As with any vehicle, you should turn the regular
headlamp system on any time you need it.
These lamps and the interior courtesy lamps will come
on when you open the doors.
To turn on a reading lamp when
the doors are closed,
press the button. Press it again to turn the lamp
off.
2-45
Page 128 of 340
MODE CONTROL: The right control knob changes
the functions
of your system.
VENT: Use when outside temperatures are mild, and
little heating or cooling is needed. Air flow is through
the instrument panel outlets.
Set the center control knob
to the temperature desired.
BI-LEV: Use on cool, but sunny days. This setting
brings in the outside air, but directs it in two ways. The
cool air is directed to the upper portion of your body
through the instrument panel outlets, but slightly
warmer air is directed through the heater ducts and
defroster vents. At times this temperature difference
may be more apparent than others.
HEAT This setting brings heated air through the heater
ducts, and some through the windshield defroster vents.
If you have the optional engine coolant heater (engine
block heater) and
use it during cold weather, 0°F
(- 1 8’ C) or lower, your heating system will more quickly
provide heat because the engine coolant is already
warmed. See “Engine Coolant Heater (Engine Block
Heater)” in the Index.
DEFOG: This setting divides air flow equally between
the heater ducts and the windshield defroster vents.
DEF: This setting directs air through the
windshield defroster vents located on top
of the
instrument panel.
Defogging Windows
To defog the windshield, turn all three control knobs to
the far right.
3-2
Page 132 of 340
AM/FM Stereo Radio
L Q []I
I II VOLUME TREE r 1 I II TUNE
I II
-
I "
The digital display indicates information on time or
radio station frequency, the
AM or FM radio band,
whether the station is in stereo, and other radio
functions.
Playing the Radio
VOLUME: With the ignition on, turn the upper knob
clockwise to turn on the radio and increase volume.
Press it to change between the clock and the radio
station frequency display when the radio is on.
Finding a Station
AM/FM: Press the lower hob to change between the
AM and FM bands (the digital display will display AM
or FM, and if the station is in stereo, STEREO will be
displayed).
TUNE: Turn the lower knob clockwise or
counterclockwise to tune in radio stations (the radio
station frequency will be displayed on
the digital
display).
SCAN: Press this button to listen to stations for a few
seconds. Press it again to stop scanning.
SEEK: Each time you press SEEK, you will tune in the
next station on the
AM or FM radio band.
3-6
Page 134 of 340
AM/FM Stereo Radio with Cassette Tape
Player (Option)
VOLUME TUNE
R
TREB
BASS
SCAN SEEK 3 4 SET
imd AUTO
The digital display indicates information on time or
radio station frequency, the
AM or FM radio band,
whether the station is
in stereo, and other radio
functions.
Playing the Radio
VOLUME: With the ignition on, turn the upper knob
clockwise to
turn on your audio system and increase
volume. Press it to change between the clock and the
radio station frequency display when the radio is on, or
to change sides of a tape when a cassette is playing.
Finding a Station
AM/FM: Press the lower knob to change between the
AM and FM bands (the digital display will display AM
or FM, and if the station is in stereo, STEREO will be
displayed).
TUNE: Turn the lower knob clockwise or
counterclockwise to tune in radio stations (the radio
station frequency will be displayed on the digital
display).
SCAN: Press this button to listen to stations for a few
seconds. Press it again to stop scanning.
SEEK: Each time you press SEEK, you will tune in the
next station on the
AM or FM radio band.
3-8
Page 135 of 340
Presets: The four numbered pushbuttons can be used to
preset up to
14 radio stations (seven AM and seven FM).
1. Tune in the desired station.
2. Press SET. The word SET will appear on the digital
display for five seconds.
3. While SET is displayed, press one of the four
pushbuttons. Whenever you press this button again,
the preset station will be tuned in.
4. Repeat steps 1-3 for each of four AM and four FM
Up to three additional stations on each band may be
preset by “pairing” pushbuttons:
stations.
1. Tune
in the desired station.
2. Press SET, and within five seconds press any two
adjacent pushbuttons at the same time. Whenever
you press these two buttons again, the preset station
will be tuned in.
Setting the Tone
TREB: Slide this lever up to increase treble or down to
decrease it.
If a station is weak or noisy, reduce the treble.
BASS: Slide this lever up to increase bass or down to
decrease it.
Adjusting the Speakers
R/L BALANCE: The control ring behind the upper
knob adjusts the lefthight speaker balance.
F/R FADE: The control ring behind the lower knob
adjusts the frondrear speaker balance.
Playing a Cassette Tape
With the power on, insert a tape into the cassette door. Do
not use tapes that are longer than 45 minutes on each side.
When the left indicator arrow is lit, selections listed on
the top side of the cassette are playing. When the right
indicator arrow is lit, selections listed on
the bottom side
of the cassette are playing. Press the upper control knob
to change sides
of a cassette while it is playing. The tape
player automatically begins playing the other side when
it reaches the end
of a tape.
To advance the tape rapidly, press the button with the
arrow pointing to the right. To stop fast forward, press
the STOP-EJECT button.
To reverse the tape rapidly, press the button with the
arrow pointing to the left.
To stop reverse, press the
STOP-EJECT button.
To stop playing
a tape, press the STOP-EJECT button. The
cassette will be ejected, and the radio will begin playing.
3-9
Page 136 of 340
AWM Stereo with Compact Disc Player
(Option)
PWR VOL
m
The digital display indicates information on time or
radio station frequency, the AM or
FM radio band.
whether the station is in stereo, and other radio
functions.
Playing the Radio
PWR-VOL:
With the ignition on, turn the upper knob
to turn
your audio system on and off, and to increase or
decrease the volume.
RCL: Press this button to alternate the digital display
between the time, station and band.
Finding a Station
AM-FM: Press the lower knob to change between the
AM and FM bands (the digital display will display AM
or FM, and
if the station is in stereo, FM ST will be
displayed).
TUNE: Turn the lower knob clockwise or
counterclockwise to
tune in radio stations (the radio
station frequency will be displayed
on the digital
display).
SEEK: Each time you press SEEK, you will tune in the
next station higher or lower on the AM or
FM radio
band.
SCAN: Press this button to listen to stations for a few
seconds. Press
it again to stop scanning. The receiver will
scan twice around
the band if SCAN is pressed only once.