ignition OLDSMOBILE AURORA 1995 Owners Manual
[x] Cancel search | Manufacturer: OLDSMOBILE, Model Year: 1995, Model line: AURORA, Model: OLDSMOBILE AURORA 1995Pages: 372, PDF Size: 19.14 MB
Page 12 of 372

I
I
Heated Seats (Option) Head Restraints
This feature will quickly heat the lower cushions and
lower back
of the driver and front passenger seats for
added comfort.
Press the button once to turn the heater on high. The HI
indicator light below the button will glow. Press it again
to turn the heater on low. The
LO indicator light below
heater off. The heater will turn off automatically when
the ignition is turned
off.
1 Y the button will glow. Press it a third time to turn the Slide the
head restraint up or down
so that the top of the
restraint is closest to the top
of your ears. This position
reduces the chance of a neck injury in a crash.
The head restraints tilt forward and rearward also.
There are four different positions. Just grasp the top of
the restraint and move it forward the way you want
it to
go until you hear a click. It will then be locked into that
position until you need to move it again. Pulling it
forward past the last position will allow the headrest to
return to its full rear position.
ProCarManuals.com
Page 54 of 372

The ignition keys are for the
ignition
only.
The door keys are for the
doors and all other locks. When
a
new Aurora is delivered, the retailer removes
the plugs from the keys and gives them to the first
owner. However, the ignition key may not have a plug.
If the ignition key doesn’t have a plug, there will be a
bar-coded key tag instead.
Each plug or tag has a code
on it that tells your retailer
or a qualified locksmith how to make extra keys. Keep
the plugs or tags in
a safe place. If you lose your keys,
you’ll
be able to have new ones made easily using these
plugs or tags.
If your ignition keys don’t have plugs or
tags, go to your Aurora retailer for the correct key code
if you need a new ignition key.
There are
15 alternative PASS-Key@II blanks, to help
discourage theft. Your retailer can he1 determine which
key code
you need. (See “PASS-Key 11” in the Index.) 8
NOTICE:
Your Aurora has a number of new features that
can help prevent theft. But you can have a lot
of trouble getting into your vehicle if you ever
lock your keys inside. You may even have to
damage your vehicle
to get in. So be sure you
have extra keys.
2-2
ProCarManuals.com
Page 57 of 372

Programmable Automatic Door Locks
Close your doors and turn on the ignition. Every time
you move your shift lever out of PARK (P) all of the
doors
will lock. And, every time you stop and move
your shift lever into PARK (P). your doors will unlock.
If someone needs to get out while you‘re not in
PARK (P). have that person use the lnanual or power
lock. When the door
is closed again, it will not lock
automatically. Just use the manual or power lock to lock
the door again. You can program the automatic door
lock feature to allow the doors to remain locked after
you
shift into PARK (Pj.
1. Close your doors and turn the ignition ON.
2. Keep your foot on the brake pedal.
3. Press and hold the driver’s power door lock switch.
4. Move your shift lever out of PARK (Pj, then move
the
shift lever back into PARK (Pj.
5. Release the lock switch. Your
doors
will now lock when you shift out of
PARK (P), and remain locked until you use the
manual or power door unlock switch.
To reprogram the door locks to lock and unlock when
you shift
in and out of PARK (P) do the following:
1. Close your doors and turn the ignition ON.
2. Keep your foot on the brake pedal.
3. Press and hold the driver’s power door unlock
switch.
4. Move the shift lever out of PARK (P), then move the
shift lever back into PARK
(P).
5. Release the unlock switch.
Rear Door Security Locks
Your Aurora is equipped with rear door security locks
that help prevent passengers from opening
the rear doors
of your vehicle from the inside.
2-5
ProCarManuals.com
Page 60 of 372

This device complies with Part 15 of the FCC Rules.
Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that
may cause undesired
operation.
Should interference
to this system occur, try this:
0
0
0
e
Check to determine if battery replacement is
necessary. See the instructions
on battery
replacement.
Check the distance.
You may be too far from your
vehicle.
This product has a maximum range.
Check the location. Other vehicles or objects may be
blocking the signal.
See your Aurora retailer or
a qualified technician for
service.
Changes or modifications
to this system by other than an
authorized service facility could void authorization to
use
this equipment.
Operation
The driver's door will unlock when UNLOCK is
pressed.
If pressed again within 25 seconds, all doors
will unlock, Pressing any button will
also illuminate the
interior lamps. (See "Illuminated Entry'' in the Index.)
All doors will lock when LOCK is pressed.
The trunk
will unlock when the opened trunk symbol is
messed, but only when the ignition is
OFF.
Matching Transmitter(s) To Your Vehicle
Each key chain transmitter is coded to prevent another
transmitter
from unlocking your vehicle. If a transmitter
is lost or stolen, a replacement can be purchased through
your retailer. Remember
to bring any remaining
transmitters with you when you
go to your retailer.
When the retailer matches the replacement transmitter to
your vehicle, the remaining transmitters must also be
matched. Once the new transmitter is coded, the lost
transmitter
will not unlock your vehicle.
You can match a transmitter to as many different vehicles
as you own, provided they are equipped with exactly the
SCII'IW model sy.mn. (General Motors offers several
different models
of these systems on their vehicles.) Each
vehicle can have only two transmitters matched to it.
See your retailer
to match transmitters to another vehicle.
ProCarManuals.com
Page 64 of 372

Glove Box Parking at Night
Park in a lighted spot, close all windows and lock your
vehicle. Remember to keep your valuables out
of sight.
Put them
in a storage area, or take them with you.
Use the door
key to
lock and unlock the glove box. To
open, pull the latch release on the left side of the glove
box door.
Theft
Vehicle theft is big business, especially in some cities.
Although your Aurora has a number
of theft deterrent
features, we
know that nothing we put on it can make it
impossible to steal. However, there are ways you can
help.
Key in the Ignition
If you walk away from your vehicle with the keys
inside, it’s an easy target for joy riders or professional
thieves
-- so don’t do it.
When you park your Aurora and open the driver’s door,
you’ll hear a chime reminding
you to remove your key
from the ignition and take it with you. Always do this.
Your steering wheel will be locked, and
so will your
ignition and transaxle. And remember to lock the doors.
Parking Lots
If you park in a lot where someone will be watching
your vehicle, it’s best to lock
it up and take your keys.
But what if you have to leave your ignition key? What if
you have to leave something valuable
in your vehicle?
0 Put your valuables in a storage areai, like your trunk
or glove box.
0 Move the trunk security override switch to OFF.
0 Lock the glove box.
0 Lock all the doors except the driver‘s.
0 Take the door key with you.
Take the Remote Lock Control key chain with you.
2-12
ProCarManuals.com
Page 65 of 372

PASS-Key@II
Your vehicle is equipped with the PASS-Key@II
(Personalized Automotive Security System) theft
deterrent system. PASS-Key@II is a passive theft
deterrent system. This means
you don’t have to do
anything different to arm or disarm the system.
It works
when you insert
or remove the key from the ignition.
PASS-Key@II uses
a resistor pellet in the ignition key
that matches a decoder
in your vehicle. When
the PASS-Key% system senses that someone is
using the wrong
key, it shuts down the vehicle’s starter
and fuel systems. For about three minutes, the starter
won’t work and fuel won’t
go to the engine. If someone
tries to start your vehicle again or uses another key
during this time, the vehicle
will not start. This
discourages someone from randomly trying different
keys
with different resistor pellets in an attempt to make
a match.
The ignition key must be clean and dry before it’s inserted\
in the ignition or the engine may not start. If the engine
does not stat and the SECURITY light is on or
you get
the CLEAN KEY. ..WAIT
3 MINUTES message, the key
may be dirty or wet. Turn the ignition off.
Clean and dry the key. Wdit about three minutes and try
again. The security light may remain on during this
time.
If the starter still won’t work, and the key appears
to be clean and dry, wait about three minutes
and try
another ignition key. At this time. you may also want to
check the fuses (see ”Fuses and Circuit Breakers”
in the
Index).
If the starter won’t work with the other key, your
vehicle needs service.
If your vehicle does start, the first
ignition key may be faulty. See your Aurora retailer or a
locksmith
who can service the PASS-Key@II.
2-13
ProCarManuals.com
Page 66 of 372

If you accidentally use a key that has a damaged or
missing resistor pellet, the starter won’t work and the
SECURITY light
will flash and the CLEAN KEY. ..
WAIT 3 MINUTES message will appear. But you
don’t have to wait three minutes before trying another
ignition key.
See your Aurora retailer or a locksmith who can service
the PASS-Key@II to have a new key made.
If you’re ever driving and the SECURITY light comes
on or PASS-KEY SYSTEM FAULT appears, you will
be able to restart your engine if you turn it off. Your
PASS-Key@II system, however,
is not working properly
and must be serviced by your Aurora retailer. Your
vehicle
is not protected by the PASS-Key@II system.
If you lose or damage a PASS-Key@II ignition key, see
yo~~r Aurora retailer or a locksmith who can service
PASS-Key@II to have a new key made.
New Vehicle 44Break-In”
NOTICE:
Your modern Aurora doesn’t need an elaborate
“break-in.” But it
will perform better in the long
run if you follow these guidelines:
0 Don’t drive at any one speed -- fast or
slow
-- for the first 500 miles (804 km).
Don’t make full-throttle starts.
200 miles (322 km) or so. During this time
your new brake linings aren’t yet broken
in. Hard stops with new linings can mean
premature wear and earlier replacement.
Follow this “breaking-in?’ guideline every
time you get new brake linings.
0 Don’t tow a trailer during “break-in.” See
“Towing
a Trailer” in the Index for more
information.
Avoid making hard stops for the first
2-14
ProCarManuals.com
Page 67 of 372

Ignition Switch
RUN
ACCESSORY
W
I NOTICE:
If your key seems stuck in LOCK and you can’t
turn it, be sure it
is all the way in. If it is, then
turn the steering wheel left and right while you
turn the key hard. But turn the key only with
your hand. Using a tool to force
it could break
the key or the ignition switch.
If none of this
works, then your vehicle needs service. With
the ignition key
in the ignition switch, you can turn
the switch to five positions:
ACC (Accessory): An ON position in which you can
operate your electrical power accessories. Press
in the
ignition switch as you turn the top of
it toward you.
LOCK: The only position in which you can remove the
key. This locks your steering wheel, ignition and
transaxle.
OFF: Unlocks the steering wheel, ignition, and
transaxle, but does not send electrical power to any
accessories. Use this position
if your vehicle must be
pushed or towed, but never
try to push-start your
vehicle.
A warning chime will sound if you open the
driver’s door when
the ignition is off and the key is in
the ignition.
RUN: An ON position to which the switch returns after
you start your engine and release the switch. The switch
stays
in the RUN position when the engine is running.
But even when the engine is not running, you can use
RUN to operate your electrical power accessories, and
to display some instrument panel warning lights.
START: Starts the engine. When the engine starts,
release the key. The ignition switch will return to
RUN
for norlnal driving.
ProCarManuals.com
Page 68 of 372

Note that even if the engine is not running, the positions
ACC and
RUN are ON positions that allow you to
operate your electrical accessories, such
as the radio.
Key Reminder Warning
If you leave your key in the ignition, in the OFF
position, you will hear a warning chime when you open
the driver’s door.
Retained Accessory Power
After you turn your ignition off and remove the key, you
will still have electrical power to such accessories as the
radio, power windows, and sunroof (if equipped) for up
to
10 minutes. But if you open a door, power is shut off.
Starting Your Engine
Move your shift lever to PARK (P) or NEUTRAL (N).
Your engine won’t start in any other position
-- that’s a
safety feature,
To restart when you’re already moving,
use NEUTRAL (N) only.
NOTICE:
Don’t try to shift to PARK (P) if your Aurora is
moving. If you do, you could damage the
transaxle. Shift to PARK (P) only when your
vehicle is stopped.
To Start Your 4.0 Liter Engine
1. Without pushing the accelerator pedal, turn your
ignition key
to START. When the engine starts, let
go of the key. The idle speed will go down as your
engine gets warm.
2-16
ProCarManuals.com
Page 73 of 372

Ensure the shift lever is fully in PARK (P) range before
starting the engine. Your Aurora has a brake-transaxle
shift interlock. You have to fully
apply your regular
brakes
before you can shift from PARK (P) when the
ignition key is in the
ON position. If you cannot shift
out of PARK (P), ease pressure on the shift lever--push
the shift lever all the way into PARK (P) and also
release the shift lever button as you maintain brake
application. Then move the shift lever into the gear you
wish. (Press the shift lever button.) See “Shifting Out of
PARK (P)” in the Index.
REVERSE (R): Use this gear to back up.
NOTICE:
Shifting to REVERSE (R) while your vehicle is
moving forward could damage your transaxle.
Shift to REVERSE (R) only after your vehicle is
stopped.
To rock your vehicle back and forth to get out of snow,
ice or sand without damaging your transaxle, see “If
You’re Stuck: In Sand, Mud,
Ice or Snow” in the Index.
NEUTRAL (N): In this position, your engine doesn’t
connect with the wheels.
To restart when you’re
already moving, use NEUTRAL
(N) only. Also, use
’ NEUTRAL (N) when your vehicle is being towed.
I NOTICE:
Damage to your transaxle caused by shifting out
of PARK (P) or NEUTRAL
(N) with the engine
racing isn’t covered by your warranty.
2-21
ProCarManuals.com