buttons Oldsmobile Cutlass Supreme 1996 Owner's Manuals
[x] Cancel search | Manufacturer: OLDSMOBILE, Model Year: 1996, Model line: Cutlass Supreme, Model: Oldsmobile Cutlass Supreme 1996Pages: 356, PDF Size: 18.48 MB
Page 123 of 356

Passenger Temperature Knob
The knob on the
passenger's door adjusts
the air temperature
on
the passenger's side so
it is warmer or colder
than the temperature set.
by the driver.
Push the PASS button on the system face
so the light
on it is lit. Turn the knob on the door toward red
(clockwise) to raise the temperature. Turn it toward blue
(counterclockwise) to lower the temperature.
Mode Buttons
The center panel has several settings to control the direction \
of airflow when the system is not in AUTO. The indicator
light on the button will glow when the button is pressed.
RECIRC: This setting can recirculate either the air
inside of your vehicle or outside air and send it through
the instrument panel outlets. Press this button once and
it will recirculate outside air. Press it again and it will
recirculate the air inside
of your vehicle. This setting is
available in LOWER, DEFOG, UPPER and BI-LEV.
UPPER: This setting brings in outside air and directs it
through the instrument panel outlets.
BI-LEV: This setting brings in the outside air and
directs it two ways. Half of the air is directed through
the instrument panel outlets. Most of the remaining air is
directed through the floor ducts and
a little to the defrost
and side window vents.
LOWER: This setting sends most of the air through the
ducts near the floor. The rest comes out of the defrost
and side window vents.
DEFOG: This setting allows half of the air to go to the
floor ducts and half to the defrost and side window vents.
DEF: This setting directs most of the air through the
defrost and side window vents. Some of the air goes to
the floor ducts. The air conditioning compressor will run
automatically in this setting unless the outside
temperature is below 40°F (4.5"C).
Automatic Control
For the most efficient operation, you should press the knob
and set the system temperature. The system will select the
best fan speed and airflow settings to keep you comfortable.
The
air conditioning compressor will run if the outside
temperature is above 40°F
(4.5 "C). You may notice a delay
of three to four minutes before the fan comes on.
3-5
Page 127 of 356

Steering Wheel Controls for Climate Audio Systems,
Control (Option)
Your Delco@ audio system has been designed to operate
easily and give years of listening pleasure. You will get
You can control certain the most enjoyment out of it
if you acquaint yourself
comfort control system with
it first. Find out what your Delco system can do
functions using the buttons and how to operate all its controls, to be sure you're
on your steering wheel. getting the most out of the advanced engineering that
went into it.
Setting the Clock
S FAN: Press the up or down arrows to increase or
decrease fan speed.
TEMP: Press the up or down arrows to increase or
decrease temperature. Press and hold
HR until
the correct hour appears. The
letter
A or P may appear on the display for AM or PM.
Then, press and hold
MN until the correct minute
appears'. The clock may be set with the ignition on
or
off.
3-9
Page 129 of 356

PSCAN: Press SCAN for more than two seconds, and
PSCAN will appear on the display. The radio will go to
the first preset station stored on your pushbuttons, stop
for a few seconds, then go on to the next preset station.
Press
SCAN again to stop scanning.
PUSHBUTTONS: The five numbered pushbuttons let
you return to your favorite stations. You can set up to
15 stations (five AM, five FM1 and five FM2).
1.
2.
3.
4.
5.
Press AM-FM to select the band.
Find the station you want by using TUNE or SEEK.
Press TONE to select the graph that best suits the
type of station selected.
Press and hold one of the five numbered buttons.
The sound will mute. When
it returns, release the
button. Whenever you press that numbered button,
the station you set will return and the TONE
equalization that you selected will also be
automatically selected for that button.
If you manually tune or use SEEK or SCAN to find a
frequency stored in a preset, the TONE equalization
stored for that frequency will not be recalled. Always
check the display first to make sure you have the
correct band.
Setting the Tone
TONE: This feature allows you to choose preset treble
and bass equalization settings designed for jazz, vocal,
pop, rock and classical stations.
JAZZ will appear on the
display when you first press TONE. Each time you press
it, another setting will appear on the display. Press it
again after CLASSIC appears and MANUAL will
appear. Manual tone control will return to the
TREB
and BASS knobs. Also; if you use the TREB and
BASS knobs, control will return to them and MANUAL
will appear.
BASS: Press this knob lightly so it extends. Turn the
knob to increase or decrease bass. When you use this
control, the radio’s TONE setting will switch to manual.
Push the knob back in when you’re not using it.
TREB: Press this knob lightly so it extends. Then pull
the
knob all the way out. Turn the knob to increase or
decrease treble. When you use this control, the radio’s
TONE setting will switch
to manual. Push the knob back
in when you’re not using it.
3-11
Page 133 of 356

PSCAN: Press SCAN for more than two seconds, and
PSCAN will appear on the display. The radio will go to
the first preset station stored on your pushbuttons, stop
for a few seconds, then go on to the next preset station.
Press SCAN again to stop scanning.
PUSHBUTTONS: The five numbered pushbuttons let
you return to your favorite stations. You can set up to
15 stations (five AM,
five FM1 and five FM2).
1.
2.
3.
4.
5.
Press AM-FM to select the band.
Find the station you want by using.TUNE or SEEK.
Press TONE to select the graph that best suits the
type of station selected.
Press and hold one of the five numbered buttons.
The sound will mute. When it returns, release the
button. Whenever you press that numbered button,
the station you set will return and the TONE
equalization that
you selected will also be
automatically selected for that button.
If you manually tune or use SEEK or SCAN to find a
frequency stored in a preset, the TONE equalization
stored for that frequency will not be recalled. Always
check the display first to make sure you have the
correct band.
Setting the Tone
TONE:
This feature allows you to choose preset treble,
and bass equalization settings designed for jazz, vocal,
pop, rock and classical stations.
JAZZ will appear on the
display when you first press TONE. Each time you press
it, another setting will appear on the display. Press it
again after CLASSIC appears and MANUAL will
appear. Tone control will return to the TREB and BASS
knobs. Also, if you use the TREB and BASS knobs,
control will return to them and MANUAL will, appear.
BASS: Press this knob lightly so it extends. Turn the
knob to increase or decrease bass. The ‘middle position is
a detent. When you use this control, the radio’s TONE
setting will switch to manual.
TREB: Press this knob lightly so it extends. Then pull
the knob all the way out. Turn the knob to increase or
decrease treble. The middle position is a detent. When
you use this control, the radio’s TONE setting will
switch to manual.
Push the knobs back in when you’re not using them.
3-15
Page 136 of 356

RCL: Press this button briefly to recall the station
being played or to display the clock. To change what is
normally shown on the display (station or time), press
the RCL button until you see the display you want, then
press the button when the ignition is off, the clock will
show for a few seconds.
~ ' hold the RCL button until the display flashes. If you
Finding a Station
AM-FM: Press this button to get AM, FM1 or FM2.
The display shows your selection.
TUNE: Press this knob lightly so it extends. 'Turn it to
choose radio stations. Push the knob back in when
you're not using it.
SEEK: Press the up or down arrow to go to the next
higher or lower station. The sound will be muted
while seeking.
SCAN: Press this button and release it to listen to
stations for a few seconds. The radio will go to a station,
stop for a few seconds, then go on to the next station.
Press the button again to stop scanning. The sound will
be muted while scanning, and SCAN will appearon the
display. If you press SCAN for more than two seconds,
the radio will change to PSCAN mode. PSCAN will
appear on the display.
PSCAN: Press SCAN for more than two seconds, and
PSCAN will appear on the display. The radio will go
to
the first preset station stored on your pushbuttons, stop
for a few seconds, then go on to the next preset station.
Press SCAN again to stop scanning.
PUSHBUTTONS: The five numbered pushbuttons let
you return to your favorite stations. You can set up to
15 stations (five AM, five
mM1 and five FM2).
1. Press AM-FM to select the band.
2. Find the station you want by using TUNE or SEEK.
3. Press TONE to select the graph that best suits the
type of station selected.
4. Press and hold one of the five numbered buttons.
5. The sound will mute. When it returns, release the
button. Whenever you press that numbered button,
the station you set will return and the TONE
equalization that you selected will also be
automatically selected for that button.
If you manually tune or use SEEK or SCAN to find a
frequency stored in a preset, the TONE equalization
stored for that frequency will not be recalled. Always
check the display first to make sure you have the
correct band.
Page 142 of 356

1. Write down any three or four-digit number from Unlbcking the Theft-Deterrent Feature A&r a
000-to 1999 and keep it in a safe place separate from Power Loss
the vehicle.
Enter your secret code as follows; pause no more than
2. Turn the ignition to the ACC or RUN position. 15 seconds between steps:
3. Turn the radio off.
4. Press the 1 and 4 buttons together. Hold them down
until
--- shows on the display. Next you will use the
secret code number which you have written down.
5. Press MN and 000 will appear on the display.
6. Press MN again to make the last two digits agree
1 7. Press HR to make the first one or two digits agree
1 8. Press AM-FM after you have confirmed that the with your code.
with your code.
code matches the secret code you have written down.
The display will show
REP to let you know that you
need to repeat Steps
5 through 7 to confirm your
secret code.
i
9. Press AM-FM and this time the display will show
SEC to let you know that your radio is secure.
1. LOC appears when the ignition is on.
2. Press MN and 000 will appear on the display.
3. Press MN again to make the last two digits agree
with your code.
4. Press HR to make the first one or two digits agree
5. Press AM-FM after you have confirmed that the
with your code.
code matches the secret code you have written down.
The display will show
SEC, indicating the radio is
now operable and secure.
If you enter the wrong code eight times, INOP will-
appear on the display. You will have to wait
an hour
with the ignition on before you can
try again. When you
try again, you will only have three chances to enter the
correct code before INOP appears.
If you lose or forget your code, contact your retailer.
Page 143 of 356

Disabling the Theft-Deterrent Feature
Enter your secret code as follows; pause no more than
15 seconds between steps:
1. Turn the ignition to the ACC or RUN position.
2. Turn the radio off.
3. Press the 1 and 4 buttons together. Hold them down
until SEC shows on the display.
4. Press MN and 000 will appear on the display.
5. Press MN again to make the last two digits agree
with your code.
6. Press HR to make the first one or two digits agree
7. Press AM-FM after you have confirmed that the
with your
code.
code matches the secret code you have written down.
The display will show
---, indicating that the radio.is
no longer secured.
If the code entered is incorrect, SEC will appear on the
display. The radio will remain secured until the cOrrect
code is entered.
When battery power is given to a secured radio, the
radio won’t turn on and
LOC will appear on the display.
Steering Wheel Controls for Audio System
(Option)
1
If your vehicle has this
feature, you can control
certain radio functions
using the buttons on your
steering wheel.
I
Some steering wheel controls operate climate controls.’
See “Steering Wheel Controls for Climate Control”
earlier in this section.
VOL: Press the up arrow to increase the volume and the
down arrow to decrease volume.
SEEK: Press this button to tune to a higher radio station.
When playing a cassette tape or compact disc, press SEEK
to hear the next selection. There must be at least a
three-second gap between selections on a cassette tape.
PROG: Press this button to tune in a higher preset radio
station. When playing a cassette tape, press
PROG to
hear the other side of a tape that is playing.
3-25
Page 350 of 356

I Loading Your Vehicle- ........................... 4-27
Locks .......................................... 2-3
Automatic Door ................................ 2-4
Cylihders ................................... 7-37
DCJDT ......................................... 2-3
Key Lock Cylinder Service ...................... 7-37
POWU Door .................................. 2-3
Steering
. Column Lock Check ................... 7-39
Trunk ....................................... 2-7
Window .................................... 2-25
Low Coolant Warning Light
...................... 2-50
Low Fuel Light .................................. 2-56
LOW Oil Level Light .............................. 2-55
Lubricants and HrJids ............................ 7-41
Lubrication Service,
Body ........................ 7-37
M~EO~S ......................................... 2-36
Convex Outside .............................. 2-37
Inside Day/Night Rearview ...................... 2-36
Power Outside ................................. .. 2-37,
Visor Vanity
................................. 2-40
"I' ......................................... 6-4
Mode Buttons. Automatic and Awriliary Temp Control . . 3-5
Mode
Knob, Climate Control System ................ 3-1
MountainRoads ................................. 4-21
Multifunction Lever
............................. 2-26
Net. Convenience .............................. 2-38
Neutral. Automatic Transaxle
..................... 2-15
New Vehicle "Break-In" .......................... 2-10
Nightvision ................................... 4-14
Maintenance. Normal Replacement parts
....... .' ... 6-70
Maintenance Record
............................ 7-43
Maintenanceschedule
............................ 7-1
Long TripMghway Definition
................... 7-5
Long Tripmighway Intervals
................ 7.5. 7.26
Owner Checks and Services
..................... 7-36
Periodic Maintenance Inspections
................ 7-40
Recommended Fluids and Lubricants
............. 7-41
Scheduled Maintenance Services'
.................. 7-3
Short Trip/Citv Definition
....................... 7-4 Odometer
................
Odometer. Trip .............
Off-Road Recovery .........
Oil. Engine ................
Oil
Waffling Light ..........
Overdrive. Automatic Transaxle
Overheating Engine .........
Owner Checks and SerVices ...
Owner Publications. Ordering .
.................... 2.44,
.................... 2-44
.................... 4-1Q
.................... 6-10
.................... 2-53
...................... 2-16
.................... 5-13
.................... 7-36
.................... 8-10
Short Tr$CiG Intervals
.................... 7.4. 7.6
Maintenance. Underbody
.. '. ...................... 6-57 Paint spotting. chemical
Maintenance When Trailer Towing 4-35
Park 6-57
Malfunction Indicator .Lamp
....................... 2-5 1 Automatic Transaxle ........................... 2-14 ManualFrontSeat ............................... 1-1
Methanol
...................................... 6-4 ShifIing-Out of .. ............................ 2-22
........................ .................
Shifting Into ................................. 2.- 13
9-6