tow bar OLDSMOBILE SILHOUETTE 1994 Owners Manual

Seats & Restraint Systems
16
To get out of the third row seats, push
down on the rear release bar under the
seat ahead
of you to tilt the seat
forward.
Removing Rear Bucket Seats
Removing the RIGHT ONLY Seats:
1. Lift the upper lever to fold the
2. Push the lower lever back so the
seatback forward.
entire seat and seatback tilt forward.
3. Then, from behind the seat, squeeze
the front release bar toward the
crossbar. The seat will release from
the floor pins.
ProCarManuals.com

I. G
Removing LEFT ONLY and CENTER
OR LEFT Seats:
1. Lift the upper lever to fold the
seatback forward.
2. Push down on the rear release bar
The entire seat will tilt forward.
3. Then, from behind the seat, squeeze
the front release bar toward the
crossbar. The seat will release from
the floor pins. adjusting Rear Seats
Each rear seat location has two sets of
floor pins. Seats equipped with the
built-in child restraint option must be
secured in the rear set of floor pins.
Seats that don’t have the built-in child
restraint can be secured in either set of
floor pins. Move the position
of these
seats up or back to provide a little more
room behind or in front of a seat.
17
ProCarManuals.com

Towing from fhe Rear-Vehicle
HOOk-Up
Before hooking up to a tow truck, be
sure to read all the information
on
Towing Your Vehicle earlier in this
section.
1. Attach T-hook chains on both sides
in the slotted holes in the frame rails
just ahead
of the rear wheels.
I
2. Position the lower sling crossbar
directly under the rear bumper. No
4x4 wood beam is needed.
3. Attach a separate safety chain around
the end of each axle inboard
of the
spring.
4. Be certain your vehicle is towed no
faster than
35 rnph (56 ltm/h) and no
farther than
50 miles (80 ltm) to
avoid damage to your transaxle.
Engine Overheating
You will find a coolant temperature
gage on your Oldsmobile's instrument
panel. See the
Index under Coolant
Temperature Gage.
1
165
ProCarManuals.com