battery capacity OPEL COMBO 2010 Owners Manual

130 Self-help, vehicle care
Picture no: 15286a.tif
zNever expose the battery to naked
flames or sparks.
zA flat battery can freeze even at
temperatures around 0 C. Thaw out a
frozen battery before connecting jump
leads.
zDo not allow battery fluid to come into
contact with eyes, skin, fabrics or
painted surfaces. The fluid contains
sulphuric acid which can cause injuries
and damage in the event of direct
contact.
zWear eye protection and protective
clothing when handling a battery. zUse a booster battery with the same
voltage (12 volts). Its capacity (Ah) must
not be much less than that of the
discharged battery.
zUse jump leads with insulated terminals
and a cross section of at least 16 mm
2
(25 mm
2 for diesel engines).
zDo not disconnect the discharged
battery from the vehicle.
zSwitch off all unnecessary electrical
consumers.
zDo not lean over the battery during jump
starting.
zDo not allow the terminals of one lead to
touch those of the other lead.
zDo not touch the vehicles while jump
starting.
zApply the hand brake and engage
neutral gear.
Picture no: 16492s.tif
Lead connection order:
1. Connect the red lead to the positive
terminal 1 of the booster battery.
2. Connect the other red lead to the
positive terminal 2 of the discharged
battery.
3. Connect the black lead to the negative
terminal 3 of the booster battery.
4. Connect the other end of the black
lead4 to a vehicle grounding point,
such as the engine block or a screw
connection in the engine suspension.
Connect the lead as far away from
the discharged battery as possible.