glove box PEUGEOT 207 2008 Owners Manual

FAMILIARISATION

1. Steering wheel adjustments control.

2. Cruise control/speed limiter switch.

3. Lights and direction indicators
controls.

4. Hazard warning lights switch.

5. Fragrance diffuser.

6. Multifunction display.
Seat belt fastening status warning lights.

7. Sunshine sensor.

8. Passenger air bag.

9. Speaker (tweeter).

10. Glove box/Passenger air bag
disarming/Audio/video sockets/
Fuse box.

11. Bonnet release control.

12. Front ashtray/Lighter.

13. Heating/air conditioning controls.

14. CD changer.

15. Audio RD4 or RT4 GPS audio/
telephone.

16. Central adjustable and closing
vents.

FAMILIARISATION
Front passenger air bag

1. Open the glove box.

2. Insert the key.

3. Select position:
"ON" (activation), with front passenger
or "forwards facing" child seat,
"OFF" (deactivation), with "rear facing"
child seat".

4. Remove the key keeping the switch
in this position.

 108 Ignition switch

A. Front left seat belt not fastened or
unfastened warning light lit in red.

B. Front right seat belt not fastened or
unfastened warning light lit in red.

C. Rear left seat belt unfastened warning
light lit in red.

D. Rear centre seat belt unfastened
warning light lit in red ** .

E. Rear right seat belt unfastened
warning light lit in red.

 104
Front and rear seat belts
** Except GTi.

1. Stop position.

2. Ignition position.

3. Starting position.

 68

20
Deactivation indicator lights
The lighting of one of the following in-
dicator lights confi rms that the corre-
sponding system has been switched off
intentionally. Passenger air bag system
disarmed.
The passenger air bag system
is activated automatically when
the vehicle is started.
A special switch, located in the glove
box, permits the disarming of this sys-
tem. This is confi rmed by continuous
lighting of this indicator light. Deactivation of the dynamic
stability control (ESP).
The ESP system is activated automatically
when the vehicle is started. A special button, located in the
centre of the fascia, permits the
deactivation of this system as
well as of the steering/ESP cou-
pling system (SSP). This is confi rmed by
continuous lighting of this indicator light
and of the indicator light on the button.

i
!
37
Once the "Display confi guration" menu
has been selected, you gain access to
the following parameters:
- selection of the palette of colours available for the display,
- setting of the brightness and bril- liance of the display,
- setting of the date and time (12 or 24 hour mode, adjustment of the
minutes on GPS),
- selection of the units (temperature in ° Celsius or ° Fahrenheit; consump-
tion in l/100 km or mpg or km/l).
Display confi guration
"Video" menu
Sounds
Once the "Sounds" menu has been se-
lected, you gain access to the following
parameters:
- setting of the voice commands,
- setting of the voice synthesiser
(volume, male or female),
- activation of the auxiliary input AUX. Language selection
Once the "Language selection" menu
has been selected, you gain access to
the following parameters:
- selection of the display language
(Français, English, Italiano, Portugues,
Espanol, Deutsch, Nederlands),
- selection of the information and voice commands language (Français,
English, Italiano, Portugues, Espanol,
Deutsch, Nederlands).
You can connect video equipment
(camcorder, digital camera, DVD play-
er, ...) to the three audio/video sockets,
located in the glove box.

Videos can only be displayed when
stationary.
Once this menu has been selected, you
can select:
- "Activate video mode" to activate/ deactivate the video,
- "Video parameters" to set the display format, the brightness, the contrast
and the colours.

 Press the "MODE" or "DARK" but-
ton to disconnect the displaying of
the video.

 Press the "SOURCE" button se-
veral times in succession to select
an audio source other than that of
the video.
The RT4 GPS audio/telephone must
reinitialise and re-start in order to
change the voice used by the voice
synthesiser (male or female) or the
language used by the system.
For safety reasons, it is imperative
that confi guration of the multifun-
ction displays by the driver takes
place when stationary.

59
INTERIOR LAYOUT

1. Glove box with light
(see details on following page)

2. Storage compartment with
non-slip mat

3. Storage compartment

4. Door tray

5. Card holder

6. Storage compartment with
non-slip mat

7. Ashtray with light/Lighter
(see details on following page)

8. Storage compartments

9. Can holder

60
Glove box with light
This has an upper open storage com-
partment and locations for storing a
small bottle of water, the vehicle’s hand-
book, ...
Its lid has locations for storing a pen,
tokens, cards, cans, ...
It may be fi tted with a lock.

 To open the glove box, raise the
handle.
It is lit when the lid is opened.
 Raise the lid to gain access to the
ashtray and the lighter.

 To empty the ashtray, after opening,
remove its receptacle.

 To use the lighter, press it and wait
a few seconds until it pops out auto-
matically.

 To connect a 12 V accessory (max
power: 120 Watts), remove the lighter and connect the appropriate
adaptor.
It houses the front passenger air bag
disarming switch
A .
If the vehicle is fi tted with air conditioning,
it provides access to the ventilation nozzle

B , which can be opened or closed, distrib-
uting the same conditioned air as the vents
in the passenger compartment.
It also permits access to the fuse box in
the fascia (refer to the "Practical infor-
mation - § Changing a fuse" section). Ashtray with light/Lighter

!
i
SAFETY
107
AIR BAGS The air bags do not operate
when the ignition is switched off.
This equipment will only operate
once. If a second impact occurs
(during the same or a subsequent
accident), the air bag will not operate.
Front air bags
System which protects the head and
chest of the driver and front passenger
in the event of a front impact.
The driver’s air bag is incorporated in the
centre of the steering wheel; the front
passenger’s air bag is incorporated in
the fascia above the glove box.
Activation
The air bags are triggered simultaneously,
unless the passenger’s front air bag is
disarmed, in the event of a serious front
impact applied to all or part of the front im-
pact zone A , in the longitudinal centreline
of the vehicle on a horizontal plane and
directed from the front to the rear of the
vehicle.
The front air bag infl ates between the front
occupant of the vehicle and the fascia to
cushion his forward movement.
Impact detection zones

A. Front impact zone.

B. Side impact zone.
Triggering of the air bag(s) is ac-
companied by a slight emission of
harmless smoke and a noise, due to
the activation of the pyrotechnic car-
tridge incorporated in the system.
This smoke is not harmful, but sen-
sitive individuals may experience
slight irritation.
The noise of the detonation may
result in a slight loss of hearing for
a short time.
System designed to maximise the safety
of the occupants (with the exception of
the rear centre passenger) in the event
of violent collisions. It supplements the
action of the force-limiting seat belts.
If a collision occurs, the electronic de-
tectors record and analyse the front and
side impacts sustained in the impact
detection zones:
- in the case of a serious impact, the
air bags are triggered instantly and
protect the occupants of the vehicle
(with the exception of the rear centre
passenger); immediately after the
impact, the air bags defl ate rapidly
so that they do not hinder visibility or
the exit of the occupants,
- in the case of a minor or rear impact or in certain roll-over conditions, the
air bags will not be triggered; the
seat belt alone is suffi cient to pro-
vide optimum protection in these
situations.

i
131
CHANGING A WHEEL
Procedure for changing a faulty wheel
for the spare wheel using the tools pro-
vided with the vehicle.
The tools are installed in the boot under
the fl oor.
To gain access to them:

 open the boot,

 raise the fl oor,

 secure it by hooking the cord(s) on
the hook(s) on the rear shelf sup-
port,

 remove the box containing the
tools.
1. Wheelbrace.
Permits removal of the wheel trim and removal of the wheel fi xing
bolts.

2. Jack with integral handle.
Permits raising of the vehicle.

3. "Bolt cover" tool.
Permits removal of the bolt pro- tectors (covers) on alloy wheels.

4. Socket for the anti-theft bolts
(located in the glove box).
Permits adaptation of the wheel- brace to the special "anti-theft"
bolts.
List of tools Other accessories

5. Removable towing eye.
Refer to the paragraph "Towing the vehicle".
Access to the tools
Wheel with trim

When removing the wheel, detach
the trim fi rst using the wheelbrace 1
pulling at the valve passage hole.

When refi tting the wheel, refi t the
trim starting by placing its notch fac-
ing the valve and press around its
edge with the palm of your hand.
All of these tools are specifi c to your
vehicle. Do not use them for other
purposes.

!
i
142
PEUGEOT does not accept any
responsibility for the costs incurred
in repairing your vehicle or for the
malfunctions resulting from the in-
stallation of additional accessories
which are not supplied or recom-
mended by PEUGEOT and which
are not installed in accordance with
its instructions, particularly when
the combined consumption of all of
the additional equipment connect-
ed exceeds 10 milliamperes.

Installation of electrical acces-
sories
Your vehicle's electrical circuit is
designed to operate with the stand-
ard or optional equipment.
Before installing other electrical
equipment or accessories in your ve-
hicle, contact a PEUGEOT dealer.
CHANGING A FUSE
Procedure for the replacement of a
faulty fuse with a new fuse in order to
rectify a failure of the corresponding
function.
Access to the tools
The extraction pliers are positioned on
the back of the fascia fuse box cover.
To gain access to them:

 open the glove box lid,

 push the opening guide to the left to
go beyond the fi rst notch,

 open the glove box lid fully,

 unclip the fuse box cover pulling at
the top, Replacing a fuse
Before replacing a fuse, the cause of
the failure must be identifi ed and recti-
fi ed.

 Identify the faulty fuse by examining
the condition of its fi lament.

 Use the special pliers to extract the
fuse from its housing.

 Always replace the faulty fuse with a
fuse of the same rating.

 Check that the number engraved
on the box and the rating engraved
on the top correspond to the tables
which follow.
Correct

Incorrect

 remove the cover completely,

 remove the pliers.
To close the glove box, take care to
push the opening guide back to the left
to go beyond the fi rst notch.

143
Fascia fuses
The fuse box is located in the lower part
of the fascia (left-hand side).
Access to the fuses

 refer to the "Access to the tools"
paragraph. Fuse tables

Fuse N° Rating Functions

G39 20 A Hi-Fi amplifi er.

G40 - Not used.

Fuse Rating Functions

F1 15 A Rear wiper

F2 - Not used.

F3 5 A Air bags and pre-tensioners control unit.

F4 10 A Clutch pedal switch, diagnostic socket,
electrochromatic interior mirror, air conditioning,
steering wheel angle sensor, particle emission fi lter
pump (Diesel).

F5 30 A Electric windows, rear one-touch electric windows,
sunroof, panoramic roof shutter (SW).

F6 30 A Front one-touch electric windows, folding mirrors
supply.

F7 5 A Front and rear courtesy lights, map reading lights,
sun visor lighting, glove box lighting, clock.