high beam Peugeot 207 CC 2011.5 Owner's Manual - RHD (UK. Australia)

9
i
i
PRACTICAL INFORMATION
132
CHANGING A BULB


1.
Direction indicators
(PY21W amber).


2.
Sidelamps (W5W).


3.
Dipped beam headlamps
(H7-55W).


4.
Main beam headlamps (H1-55W).


5.
Directional headlamps (H7-55W).


6.
Foglamps (H11-55W).



Changing the direction indicator
bulbs



)
Do not touch the bulb directly
with your fi ngers, use lint-free
cloths.
Changing a bulb should only be
done after the headlamp has been
switched off for a few minutes (risk
of serious burns).
It is imperative to use only anti-
ultraviolet (UV) type bulbs in order
not to damage the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specifi cation.

































Model with conventional lamps
Amber coloured bulbs, such as
the direction indicators, must be
replaced with bulbs of identical
specifi cation and colour.

)
Turn the bulb holder one quarter of
a turn and remove it.

)
Pull the bulb then change it.
To r efi t, carry out these operations in
reverse order. The headlamps are fi tted with polycar-
bonate glass with a protective coating:


)
do not clean them using a dry or
abrasive cloth, nor with a deter-
gent or solvent product,


)
use a sponge and soapy water,

)
when using a high pressure washer
on persistent marks, do not keep the
lance directed towards the lamps or
their edges for too long, so as not to
damage their protective coating and
seals. Model with elliptical module dipped
beam headlamps and directional
headlamps

Front lamps