fog light Peugeot 208 2015 User Guide

In the event of a breakdown195
208_en_Chap08_cas-de-panne_ed01-2016
Changing a bulb
Front lamps
A. Model with light guide
In some weather conditions (e.g. low
temperature or humidity), the presence
of misting on the internal sur face of the
glass of the headlamps and rear lamps
is normal; it disappears after the lamps
have been on for a few minutes.
The headlamps have polycarbonate
lenses with a protective coating:
F

d

o not clean them using a dr y
or abrasive cloth, nor with a
detergent or solvent product,
F

u

se a sponge and soapy water or a
pH neutral product,
F

w

hen using a high pressure washer
on persistent marks, do not keep
the lance directed towards the
lamps or their edges for too long,
so as not to damage their protective
coating and seals.
B. Model without light guide
1. Main beam headlamps (H7-55W).
2. D ipped beam headlamps (H7-55W).
3.
D

aytime running lamps / sidelamps
(light emitting diodes - LEDs).
4.
D

irection indicators (PWY-24W).
5.
F

ront foglamps (directional according
to version) (H11-55W). 1. M
ain beam headlamps (H7-55W).
2. D ipped beam headlamps (H7-55W).
3.
D

aytime running lamps / sidelamps
(W5-5W).
4.
D

irection indicators (PWY-24W).
5.
F

ront foglamps (directional according
to version) (H11-55W).
Changing a bulb should only be done
after the headlamp has been switched
off for several minutes (risk of serious
burns).
F

D

o not touch the bulb directly with
your fingers, use a lint-free cloth.
It is imperative to use only anti-
ultraviolet (UV) type bulbs to avoid
damaging the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specification.
8

In the event of a breakdown
196
208_en_Chap08_cas-de-panne_ed01-2016
Amber coloured bulbs, such as the
direction indicators, must be replaced
with bulbs of identical specifications
and colour.
When refitting, close the protective
cover carefully to preserve the sealing
of the headlamp.
Rapid flashing of the direction indicator
warning lamp (right or left) indicates the
failure of a bulb on that side.
Changing direction indicator
bulbs
F Turn the bulb holder a quarter of a turn and
extract it.
F

P
ull out the bulb and change it.
To reassemble, carry out these operations in
reverse order.
C. GTi model
1. Main beam headlamps (H7-55W).
2. D ipped beam headlamps (H7-55W).
3.
D

aytime running lamps / sidelamps
(light -emitting diodes - LEDs).
4.
D

irection indicators (light -emitting
diodes - LEDs).
5.
F

ront foglamps (directional according
to version) (H11-55W).

In the event of a breakdown
198
208_en_Chap08_cas-de-panne_ed01-2016
Changing the daytime running
lamps / sidelamps (light- emitting
diodes - LEDs)
For the replacement of this type of LED lamp,
contact a PEUGEOT dealer or a qualified
workshop.
Changing front foglamp /
directional lamps
F Access to the front foglamp is through the orifice below the bumper.
F

D
isconnect the bulb holder connector by
pressing on the top of the tongue.
F

E
xtract the bulb holder by pressing on the
two clips clips (top and bottom).
F

R
eplace the module. To reassemble, carry out these
operations in reverse order.
To obtain this module, contact a
PEUGEOT dealer or a qualified
workshop.
You can also contact a PEUGEOT
dealer or a qualified workshop for this
replacement.

In the event of a breakdown199
208_en_Chap08_cas-de-panne_ed01-2016
1. Brake lamps (light- emitting diodes - LEDs).
2.
R

eversing lamps (P21W).
3.
D

irection indicators (PY21W amber).
4.
S

idelamps (light-emitting diodes -
LEDs).
Rear lamps
5. Foglamp (P21W).
Changing integrated direction
indicator side repeater bulbs
F Insert a flat screwdriver between the mirror glass and its base.
F

U
se the screwdriver as a lever to extract
the mirror glass.
F

U
nclip the mirror shell by pressing on the
two retaining clips. To reassemble, carry out these
operations in reverse order.
You should contact a PEUGEOT
dealer or a qualified workshop for the
replacement of these bulbs.
F
P ress the central tongue and remove the
side repeater.
F

P
ull the bulb holder out and replace the
failed bulb.
8