lock Peugeot 208 2019 Owner's Manual

2
.
.
Instrument panels 8
W arning and indicator lamps 1 0
Indicators
20
Trip computer

2
4
Setting the time and date

2
6
Lighting dimmer

2
7Remote control key

2
8
Central locking
3
0
Back-up procedures
3
0
Boot

32
Alarm

33
Electric windows
3
4
PEUGEOT i- Cockpit
3
6
Steering wheel adjustment
3

6
Mirrors
36
F

ront seats
3
8
One-piece bench seat
4

0
2/3 -1/3
split rear bench seat
4
0
Head restraints

4
1
Advice on heating and air conditioning

4
1
Heating


42
Manual air conditioning
4

3
Dual-zone automatic air conditioning
4

3
Recirculation of interior air

4
5
Front demisting – defrosting

4
5
Rear screen demisting - defrosting

4
6
Courtesy lamp

4
6
Interior ambient lighting
4

7
Sunroof blind

4
7
Interior fittings

4
8
Boot fittings

4
9
Rear shelf
5

0Lighting control stalk

5
1
Headlamp beam height adjustment
5
4
Cornering lighting
5
5
Wiper control stalk
5
5
Changing a wiper blade
5
7
General safety recommendations
5
8
Hazard warning lamps
5

8
Emergency or assistance call

5
9
Electronic stability control (ESC)

6
0
Seat belts
6

2
Airbags


65
Child seats

6
8
Deactivating the front passenger airbag
6

8
ISOFIX mountings and child seats
7

4
Child lock

7
9
InstrumentsAccess
Over view
Ease of use and comfort Lighting and visibility
Safety
Eco-driving
Instruments and controls 4
Contents

5
Steering mounted controls
1
Lighting control stalk
Direction indicators
2
Steering mounted controls
for the touch screen: volume, source change
3
Cruise control
Speed limiter
Memorising speeds
4
Steering mounted controls
for the audio system
Side switch panel
(Depending on version)Activation of Park Assist
or Deactivation of the rear parking
sensors
Deactivation of the DSC/ASR
system Deactivation of Stop & Start
Reinitialisation of the tyre under-
inflation detection (without touch
screen)
Deactivation of the interior
volumetric monitoring
Activation of the electric child lock
Headlamp beam height adjustment
Central switch panel
Central locking
Hazard warning lamps
5
Driver front airbag
Horn
6
Wiper control stalk
Trip computer
7
Steering mounted controls
for the touch screen
.
Over view

14
Warning/indicator lampStateCause Actions/Observations
Anti-lock braking
system (ABS) Fixed.
The anti-lock braking system has
a


fault.The vehicle retains conventional braking.
Drive carefully at moderate speed, then carry out (3).
Dynamic
stability control
(DSC)/Anti- slip
regulation (ASR) Flashing.
The DSC/ASR regulation is activated
if there is a
loss of grip or trajectory.
Fixed. The DSC/ASR system has a
fault. Carry out (3).
Power steering Fixed. The power steering has a
fault. Drive carefully at moderate speed, then carry out (3).
Low fuel level Fixed, with the needle
in the red zone. When it first comes on, around
5
litres of fuel remain in the tank.Refuel without delay to avoid running out of fuel.
Flashing, with the
needle in the red zone. Very little fuel remains in the tank.
Never drive until completely empty, this could
damage the emissions and injection systems.
Airbags Fixed. One of the airbags or seat belt
pretensioners is faulty. Carry out (3).
Foot on the
brake
Fixed.
Omission or insufficient pressure on
the brake pedal. With an automatic gearbox, with the engine running,
before releasing the parking brake, to move out of
position P
.
Instruments

20
Indicators
Service indicator
The ser vice indicator is displayed in the
instrument panel. Depending on the vehicle
version:
-
t
he distance recorder display line indicates
the distance remaining before the next
ser vice is due, or the distance travelled
since it was due preceded by the "-" sign.
Warning/indicator
lamp State
CauseActions/
Observations
Ser vice
spanner Lights up temporarily
when the ignition is
switched on.
Between 620 and
1 ,860 miles (1,000 and
3,000
km) remain before
the next ser vice is due.
Fixed, when the
ignition is switched on. The ser vice is due in
less than 620
miles
(1,000


km).Have your vehicle
serviced very soon.
+ Ser vice
spanner
flashing
Flashing then fixed,
when the ignition is
switched on.
(For BlueHDi Diesel
versions, associated
with the Ser vice
warning lamp). The servicing interval
has been exceeded.
Have your vehicle
ser viced as soon as
possible.
The distance indicated (in miles or
kilometres) is calculated according to the
distance covered and the time elapsed
since the last ser vice.
The alert may also be triggered close to
a
due date.
-
a
n alert message indicates the distance
remaining, as well as the period before
the next ser vice is due or how long it is
overdue.
Resetting the service indicator
The ser vice indicator must be reset after each
service.
If you have carried out the ser vice on your
vehicle yourself:
F

s
witch off the ignition,
If you have to disconnect the battery
following this operation, lock the vehicle
and wait at least 5
minutes for the reset to
be registered.
F

p
ress and hold the trip distance recorder
reset button,
F

s
witch on the ignition; the distance recorder
display begins a


countdown,
F

r
elease the button when " =0" is displayed;
the spanner disappears.
Instruments

28
Remote control key
System which permits central unlocking or
locking of the vehicle using the door lock or
from a distance.
It also ensures the localisation and starting of
the vehicle, as well as theft protection.
A. Unfolding/Folding.
B. Unlocking.
Disarming the alarm.
C. Locking.
Locating the vehicle.
Arming the alarm.
D. Guide-me-home lighting.
Unfolding/Folding the key
F Press button A to unfold/fold the key. If you do not press the button, you risk
damaging the remote control.
Unlocking the vehicle
With the key
F Turn the key in the driver's door lock
towards the front of the vehicle to
unlock.
With the remote control
F Press this button to unlock the vehicle.
Unlocking is confirmed by rapid flashing of
the direction indicators for a
few seconds.
Depending on version, the door mirrors unfold
and the welcome lighting comes on.
Unlocking with the key does not deactivate the
alarm.
Selective unlocking of the
driver's door
Complete unlocking is activated by default.
With the touch screen, selective
unlocking can be configured from
the Driving/Vehicle menu. F

P
ress this button to unlock the
driver's door only. Press twice in
quick succession to unlock the
other doors and the boot.
Locking the vehicle
With the key
F Turn the key in the driver's door lock towards the rear of the vehicle to lock it.
Check that the doors and boot are fully
closed.
With the remote control
F Press this button to lock the vehicle.
Locking is confirmed by fixed illumination of
the direction indicators for approximately two
seconds. Depending on version, the door
mirrors fold.
If one of the doors or the boot is still open,
the central locking does not work; the vehicle
locks, then immediately unlocks, identifiable by
the locks making a


rebound sound.
Access

29
When the vehicle is locked, if it is
unlocked without the opening of a door
or the boot, it will automatically lock itself
again after thirty seconds.
Locating your vehicle
F A press switches on the vehicle's lighting and flashes the direction
indicators for a
few seconds to
help you locate your vehicle.
Guide-me-home lighting
Make a long press on this button to
o perate the guide-me-home lighting
(switching on the sidelamps, dipped
beams and number plate lamps).
A second press before the end of the timed
period cancels the guide-me-home lighting.
Deadlocking
Deadlocking deactivates the exterior and
interior door controls as well as the central
locking button on the dashboard.
You must therefore never leave anyone
inside the vehicle when it is deadlocked.
With the key
F Turn the key to the rear in the driver's door lock.
F

T
urn the key to the rear again within
5
seconds to deadlock the vehicle.
With the remote control
F Press this button once to lock the vehicle fully.
F

P
ress this button again within
5
seconds to deadlock the
vehicle.
Deadlocking is confirmed by fixed
lighting of the direction indicators for
approximately 2


seconds.
Depending on the version you have, the
electric door mirrors fold at the same time.
Advice
Remote control
The high frequency remote control is
a
sensitive system; do not operate it while
it is in your pocket as there is a
possibility
that it may unlock the vehicle, without you
being aware of it.
Do not press the buttons of your remote
control out of range and out of sight of
your vehicle. It might stop working. It will
then be necessary to reinitialise it again.
The remote control does not operate when
the key is in the ignition, even when the
ignition is switched off.
Anti-theft protection
Do not make any modifications to the
electronic engine immobiliser system; this
could cause malfunctions.
For vehicles with an ignition switch, do
not forget to remove the key and turn the
steering wheel to engage the steering
lock.
The automatic folding and unfolding of the
door mirrors can be deactivated via the
vehicle's configuration menu.
2
Access

30
Central locking
Manual
F Press this button to operate the central locking of the vehicle (doors and boot) from inside the vehicle.
The indicator lamp in the button comes on.
F

P
ressing the button again unlocks the vehicle
completely. The indicator lamp in the button goes
of f.
The indicator lamp also goes off when
unlocking one or more doors.
The central locking does not work if one of
the doors is open.
Automatic (anti-intrusion
security)
The doors and boot can lock automatically
while driving (speed above 6 mph (10 km/h)).
To activate or deactivate this function (activated
by default):
F

P
ress the button until an audible
signal is heard and/or a
message
appears in the screen.
Back-up procedures
Total unlocking/locking of
the vehicle with the key
Use these procedures in the following cases:
- r emote control cell battery flat,
-

r
emote control fault,
-

v
ehicle in an area subject to strong
electromagnetic interference.
In the first case, you can also replace the
remote control cell battery.
In the second case, you can also reinitialise the
remote control.
Refer to the corresponding sections.
Locking the vehicle
Driving with the doors locked could make it
difficult for the emergency services to enter
the vehicle in an emergency.
As a
safety precaution (with children on
board), remove the key from the ignition when
leaving the vehicle, even for a
short time.
Lost keys, remote control
Go to a PEUGEOT dealer with the
vehicle's registration document, your
personal identification documents and if
possible the key code label.
The PEUGEOT dealer will be able to
retrieve the key code and the transponder
code required to order a
new key.
Purchasing a


second-hand vehicle
Have the key codes memorised by
a
PEUGEOT dealer, to ensure that the
keys in your possession are the only ones
which can start the vehicle.
If the vehicle is deadlocked or locked from
the outside, the button is not active. If the
vehicle is not deadlocked, use the remote
control to unlock the vehicle or pull an
interior door handle to open a
door.F

I
nsert the key in the door lock.
F

T
urn the key towards the front of the
vehicle to unlock it, or towards the rear to
lock it.
Access

31
F Turn the key towards the rear again within 5 seconds to deadlock the vehicle.
Lighting of the direction indicators for a
few
seconds confirms that the procedure has
completed correctly.
If your vehicle is fitted with an alarm, this
function will not be activated when locking
with the key.
If the alarm is activated, the siren sounds
on opening the door; switch on the ignition
to stop it.
Central locking not
functioning
Use these procedures in the following cases:
- c entral locking fault,
-
b

attery disconnected or discharged.
In the event of a
malfunction with the
central locking system, the battery must
be disconnected to lock the boot and thus
ensure that the vehicle is locked fully.
Driver's door
F Turn the key towards the rear of the vehicle to lock it, or towards the front to unlock it.
Passenger doors
Unlocking
F P ull the interior door opening handle.
Locking
F

O
pen the door.
F

F
or the rear doors, check that the child lock
is not activated. Refer to the corresponding
section.
F

R
emove the black cap, located on the edge
of the door, using the key.
F

I
nsert the key into the hole without forcing
it; then, without turning it, move the latch
sideways towards the inside of the door.
F

R
emove the key and refit the black cap.
F

C
lose the doors and check from the
outside that the vehicle is locked.
Changing the battery
If the battery is flat, you are informed
by illumination of this warning lamp,
an audible signal and a
message in
the screen. Batter y ref.: CR1620/3
volts.
F
U
nclip the cover by inserting a small
screwdriver in the slot and raise the cover.
F
R
emove the discharged battery from its
housing.
F
I
nsert the new battery, observing the
polarity, and clip the cover onto the
housing.
F
R
einitialise the remote control.
For more information on Reinitialising the
remote control , refer to the corresponding
section.
Do not throw remote control batteries
away as they contain metals which are
harmful to the environment. Take them
to an approved collection point.
2
Access

32
Reinitialising the remote
control
Following replacement of the battery or in
the event of a remote control fault, it may be
necessary to reinitialise the remote control.
F

S
witch off the ignition.
F

T
urn the key to position 2

(Ignition on).
F

P
ress the closed padlock button for a few
seconds.
F

S
witch off the ignition and remove the key
from the switch.
The remote control is now fully operational
again.
Boot
Opening
F After unlocking the boot or the vehicle using the remote control or the key, press
the opening control, then raise the tailgate.
Closing
F Lower the tailgate using the interior grab handle.
F

I
f necessary, press down on the tailgate to
fully close it.
If the tailgate is not fully closed:
-

w
ith the engine running ,
this warning lamp comes on,
accompanied by the display of an
alert message for a
few seconds,
-

w
hen driving (speed above 6
mph
(10
km/h)), this warning lamp comes on,
associated with an audible signal and
the display of an alert message for a
few
seconds. In the event of a
fault or difficulties felt in
manoeuvring the tailgate when opening
or closing it, have it quickly checked
by a PEUGEOT dealer or a qualified
workshop to stop this issue getting worse
and so as to not cause the tailgate to drop,
and serious injuries.
Backup control
System for mechanical unlocking of the boot in
the event of a central locking malfunction.
Unlocking
F Fold the rear seats to gain access to the lock from inside the boot.
F

I
nsert a small screwdriver into hole A of the
lock to unlock the boot.
F

M
ove the latch to the left.
Access

33
In the event of a fault with the central
l ocking system, it is essential to
disconnect the battery to lock the boot and
so ensure complete locking of the vehicle.
Alarm
System which protects and provides a deterrent
a gainst theft and break-ins. It provides the
following types of monitoring:
-

E
xterior perimeter :
T

he system checks whether the vehicle is
opened. The alarm is triggered if anyone
tries to open a
door, the boot or the bonnet.
-

I
nterior volumetric :
T

he system checks for any variation in the
volume in the passenger compartment.
The alarm is triggered if anyone breaks
a


window, enters the passenger
compartment or moves inside the vehicle. Self-protection function
: the system
checks for the putting out of ser vice of its
own components. The alarm is triggered
if the battery, button or siren wiring is
disconnected or damaged.
For all work on the alarm system, contact
a PEUGEOT dealer or a qualified
workshop.
Locking the vehicle with full
alarm system
Activation
F Turn the ignition off and exit the vehicle.
The exterior perimeter monitoring is activated
after 5
seconds and the interior volumetric
monitoring after 45


seconds.
F

L
ock or deadlock the vehicle
using the remote control.
When the monitoring system is active, the
indicator lamp in the button flashes once per
second and the direction indicators come on for
about 2


seconds. If an opening (door, boot, bonnet, etc.)
is incorrectly closed, the vehicle is
not locked, but the exterior perimeter
monitoring will be activated after
45
seconds, at the same time as the
interior volumetric monitoring.
Deactivation
F Press the remote control unlocking button.
The monitoring system is
deactivated: the indicator lamp in
the button goes off and the direction
indicators flash for about 2
seconds.
If the vehicle automatically locks itself
again (as happens if a
door or the boot
is not opened within 30
seconds of
unlocking), the monitoring system is
automatically reactivated.
Triggering of the alarm
This is indicated by sounding of the siren
and flashing of the direction indicators for
30


seconds.
The monitoring functions remain active until
the alarm has been triggered ten times in
succession.
2
Access