navigation Peugeot 307 Break Dag 2003.5 Owner's Manual

29-09-2003





 





 


  The satellite navigation system guides you, by means of 

 
  (graphics), to
your chosen destination. The heart of the system lies in the use of a map data base and !
"#
! $
% &'( . With
this system you can fix the positionof your vehicle by means of a satel-lite network. The system uses the following elements:
– the CD-Rom drive,
– the configuration CD-Rom,
– the navigation CD-Rom,
– the last voice message recall control,
– the control keypad,
– the CT monochrome screen or the DT colour screen.
)&
*+'
&
This is part of the RT3 GPS audio/telephone. ,-
Ejection button on CD-Rom.
- CD-Rom housing.
)&
$
*+'This contains all the map data. It must be inserted in the drive, printed face upwards.
Use only CD-Roms approved by PEUGEOT.
)&
 
&
'& $&
&
- Pressing for more than two seconds on the button at the end of the lights stalk repeats the last voice information.
Certain functions or services
described may vary depending
on the version of CD-Rom or the
country where the vehicle is sold.






 

 
 
















  


29-09-2003





 

.
)&
/ This allows you to '&
the screen and thus select a function.
It also allows you:
– with a 0 &$0 type parameter, after selection, to & &or && & the
value,
– with a 0 0type parameter, to open the list and 
)$)the values.
– with '1guidance, to increase the 2'.
!& $
)&
/ This allows: – & to the list of controls (contextual menu) of the permanent display, if
there is no other display superimposed.
– .' of the selected function or the modified value.
– && of a 0 &$0 or 0 0 type parameter for modification.
00
#/
– brief press: modification of permanent display (audio system, navigation/ guidance...),
– Press for more than two second: display of $&&
.'.
0*0
#/
– brief press: &$of operation in progress or & $of last
superimposed display.
– pressing for more than two seconds: erasing of all superimposed displays and return to the permanent display.
0
0
#/
– Brief press: access to the $&&
'&.
– Press for more than two seconds: access to the )&1
'&.
)&

3&%1 This lets you select and validate the functions, controls and programmesdisplayed.

29-09-2003





 
4
Select the Navigation/Guidance icon using the dial , then validate by
pressing the dial to access the main
0
$
+
&0 menu.
&&
'&
Switch on the RT3 GPS audio/ telephone and insert the navigationCD-Rom. Press the 0
0button to access
the $&&
'& .
During guidance, if the navigation CD-Rom is present, the screen displays
different information depending on the manoeuvres to be carried out. ,- Current manoeuvre or compass or course (if calculation in progress or zone not mapped).
- Next manoeuvre to be carried out.
- Next road to be taken.
4- Current road.
5- Estimated time of arrival at destination.
6- Distance to final destination.
- Distance to next manoeuvre.

& /

– depending on the situation of the vehicle and on the reception of GPS information, this information may disappear from the screen temporarily,
– during guidance, the navigation CD-Rom must remain in the RT3 GPS audio/telephone.
&&
&

)&
 1%
)'&
&&
*
*
&&



,
65
4

,
654

29-09-2003





 C
The menu BB&
1 BB
provides access to the following functions:
– changing of the route calculation criteria,
– voice synthesis adjustment of guidance messages,
– description of the information relating to the navigation CD-Rom,
– management of the addresses stored in the directory.
&
1
The last criterion used is displayed. Select a criterion from the list, then validate by pressing the dial. When the criterion of your choice has been selected, select the
090
function then confirm by pressing thedial.
> $
)&
&
%)&  & Select the type of voice 0'&0or
0.&'&0 , after inserting the configu-
ration CD-Rom.
Adjust the volume of the voice synthesis by turning the dial, then validate bypressing the dial.
&/ the volume can also be adjusted
during a message, using the audio/ telephone button or the steeringwheel control. $&'&
.
)&
&% This function enables you to rename
an address stored in the directory. Select the description corresponding to the stored address to be changed. Select the
0&'&0 function, then
confirm by pressing the dial.Select the 090function, then confirm
by pressing the dial to record the changes made.
11$D& '$
$&
 "Stop guidance" During guidance, select this function then validate.
 "Resume guidance" In the absence of guidance, select this function then validate to activateguidance to the last destination programmed.
&/ after re-starting the engine, a
screen appears enabling you to resume guidance activated before
the ignition was switched off.
*
&

29-09-2003





 A,
&&
&

)&
010 11F The 010 application has two
display modes:
G 0&)&
.7$

'10 mode, representing active guid-
ance on the map on the right and a large-scale view of the next inter-section on the left,
G 0&&+&'&

'10 mode, representing consultation ofthe map on the right and a compasson the left.
To switch from one mode to the
other, press the dial on the right
briefly, then select the 0&
)&
'10 or 0E
'1
'&0 function.
In 0&&+'&'&

'10
mode, you can see symbols, repre-senting the various types of serviceswhich exist, sorted by category: – "Administration and safety" symbol on a grey background,
– "Hotels, bars and restaurants" symbol on a yellow background,
– "Other businesses" symbol on a purple background,
– "Culture, tourism and entertainment" symbol on a white background,
– "Sports centres and open air centres" symbol on a green background,
– "Transporation and automobiles" symbol on a blue background. A
0H'0 function enables you to
enlarge the map, in accordance with the thirteen preset levels relating tothe following scales:
– 50 m/cm, 100 m/cm, 150 m/cm, 200 m/cm, 500 m/cm,
– 1 km/cm, 2 km/cm, 5 km/cm,– 10 km/cm, 20 km/cm, 50 km/cm,– 100 km/cm, 200 km/cm.This is achieved by turning the dial. This mode permits:
– displaying of the vehicle on the map with the route proposed by the navigation if the guidance isactive,
– zooming in on the map in accor- dance with the thirteen preset lev-
els,
– displaying of the 0
$
+
&0 contextual menu.
0&)&
.7$

'10
'&
This mode permits:
– selection of any point on the map
to obtain guidance towards it or to obtain information about it (postal
address if available or, if it is not,GPS co-ordinates),
– movement on the map by means of the four directional arrows, rep-resenting the four cardinal points
(North, East, South, West),
– zooming in on the map in accor- dance with the thirteen preset lev-
els,
– displaying of the 010contextual
menu.
* DT colour screen only.
0&&+&'&

'10'&