Temperature Peugeot 307 CC 2003 User Guide

[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2003, Model line: 307 CC, Model: Peugeot 307 CC 2003
Pages: 173, PDF Size: 2.12 MB

Load previous 10 pages

Page 35 of 173

Peugeot 307 CC 2003 User Guide 22-09-2003
YOUR 307 CC IN DETAIL
36
Parameter configuration Monochrome screen B Press button
1for two seconds to
gain access to the settings.
Then, each press of this button permits scrolling of the

Page 36 of 173

Page 82 of 173

Peugeot 307 CC 2003 User Guide 22-09-2003
YOUR 307 CC IN DETAIL
82
2. Automatic comfort programme
Press the AUTObutton. The sys-
tem automatically regulates the temperature level of the passen-ger compartment in line with the
tempe

Page 83 of 173

Peugeot 307 CC 2003 User Guide 22-09-2003
YOUR 307 CC IN DETAIL83
5. Air distribution
Successive presses of this button allow the air flow tobe directed alternately to:
Ð the windscreen (demisting or de-icing),
Ð the windscreen a

22-09-2003
YOUR 307 CC IN DETAIL83
5. Air distribution
Successive presses of this button allow the air flow tobe directed alternately to:
Ð the windscreen (demisting or de-icing),
Ð the windscreen and the footwells,
Ð the footwells,
Ð the central and side vents and the footwells,
Ð the central and side vents.
7. Air intake
Press this button to recycle
the interior air. Recirculation,
shown on the display, pre-ventsthe entry of unpleasant
odours and fumes from the outside.
Avoid prolonged recirculation of the
interior air. To do this, press again toreturn the system to automatic pro-cessing of the air intake. Note: To prevent condensation on
the inside of the vehicle in cold or
wet weather, you are advised toavoid using this mode.
4. Air conditioning
Press this button to stop
cooling of the air. The"ECO"symbol lights up.
Press again to return to
automatic operation of the air condi-tioning. The "A/C"symbol is dis-
played. 8. Switching the system off
The
OFF button enables the
entire system to be switched off.
Temperature-related com-fort is no longer guaranteed
but a minimal flow of air is main-tained to prevent misting and to
renew the air. Pressing the OFF, AUTO or "visibility"
button again reactivates the system with the values set before it was
switched off.
Note: if you wish to cut off the flow of air
completely, press the air intake button 7.
9. De-icing the rear window and
the mirrors
Press this button to de-icethe rear screen and the mir-
rors. The de-icing system
switches off automatically.
It is possible to stop the de-icing
before it switches off automaticallyby pressing the button again. Note: this function is disarmed when
the roof is stored in the boot. Important precaution Operate the air conditioning system for 5 to 10 minutes, once or twice amonth, to keep it in perfect working
order. If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
Manual operation
If you wish you can make a different
choice from the one offered by the
system, by changing a setting. Theother functions will still be managed
automatically. Press the
AUTObut-
ton to return to completely automaticoperation.
6. Air flowThe air flow may beincreased or reducedby pressing the buttons+or Ðrespectively.
Notes The condensation created by the air conditioning causes a normal flow ofwater under the vehicle when sta-
tionary.
To prevent condensation on the inside of the vehicle in cold or wet
weather, you are advised to avoidusing the "ECO"mode.

Page 142 of 173

Peugeot 307 CC 2003 User Guide 22-09-2003
PRACTICAL INFORMATION
130
CHECKING THE LEVELS Oil level
Check the level regularly and top
up between changes. The maxi-mum consumption is 0.5 l per600 miles (1,000 km). Check the level w

22-09-2003
PRACTICAL INFORMATION
130
CHECKING THE LEVELS Oil level
Check the level regularly and top
up between changes. The maxi-mum consumption is 0.5 l per600 miles (1,000 km). Check the level with the vehicle level, engine cold, using the oil levelgauge on the instrument panel orthe dipstick.
Dipstick There are two marks onthe dipstick: A=maximum
Never fill past this mark
B= minimum
To maintain the reliability of engines and emissioncontrol systems, the useof additives in engine oilis prohibited.
Oil change According to the information given in
"PEUGEOT SERVICING" .
Note: avoid used oil coming into
prolonged contact with the skin. Viscosity selection In all cases, the oil selected must meet the manufacturer's requirements. Brake fluid level:
Ð The level must always be between
the DANGER and MAXIMUM
marks in the reservoir.
Ð If the level drops substantially, contact a PEUGEOT dealer
immediately.
Fluid change:
Ð must be carried out according to the manufacturer's servicing schedule.
Ð use fluids recommended by the manufacturer, which fulfil DOT4standards.
Note: brake fluid is harmful to health
and very corrosive. Avoid all contactwith the skin. Cooling system Use the fluid recommended by the
manufacturer. When the engine is warm, the tem- perature of the coolant is controlled
by the engine fan. As this fan canoperate with the ignition keyremoved and because the coolingsystem is pressurised, wait for atleast one hour after the engine hasstopped before carrying out anywork. Slacken the cap to the first notch torelease the pressure to prevent anyrisk of scalding. When the pressurehas dropped, remove the cap andtop up the level. Note:
the coolant does not need to
be changed. Used oil Do not dispose of used oil, brake fluid or coolant into drains or into theground. Power steering reservoir Open the reservoir, with the engine at ambient temperature.The level should always beabove the MIN. mark and closeto the MAX. mark.
Windscreen and headlamp* wash level For best quality cleaning and for your
safety, we would advise that you use
products recommended by PEUGEOT.
* According to destination.